|
Special alloy brass or aluminum tube flanged 90 degrees one end, functions as a drain for transom, motorwell, livewell or baitwell. Designed for use with Moeller's Snap Tite, Turn Tite, and Trail N Bail plugs. Use brass drain tubes with brass plugs and aluminum drain tubes with aluminum plugs. 12 per pack, sold individually. Display packed.
|
8.39 |
|
|
Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4
|
1758.24 |
|
|
Get 10% OFF an N76-46P Pump Body Today!
Flotec N76-46P Pump Body
This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps. For use in Ponds, Fountains and watering the grass.
The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.
For use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN.
N76-46P, Pump Body, for use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN
Get Your Coupon Code Today!
|
|
|
Special alloy brass or aluminum tube flanged 90 degrees one end, functions as a drain for transom, motorwell, livewell or baitwell. Designed for use with Moeller's Snap Tite, Turn Tite, and Trail N Bail plugs. Use brass drain tubes with brass plugs and aluminum drain tubes with aluminum plugs. 12 per pack, sold individually. Display packed.
|
11.99 |
|
|
Special alloy brass or aluminum tube flanged 90 degrees one end, functions as a drain for transom, motorwell, livewell or baitwell. Designed for use with Moeller's Snap Tite, Turn Tite, and Trail N Bail plugs. Use brass drain tubes with brass plugs and aluminum drain tubes with aluminum plugs. 12 per pack, sold individually. Display packed.
|
21.99 |
|
|
Special alloy brass or aluminum tube flanged 90 degrees one end, functions as a drain for transom, motorwell, livewell or baitwell. Designed for use with Moeller's Snap Tite, Turn Tite, and Trail N Bail plugs. Use brass drain tubes with brass plugs and aluminum drain tubes with aluminum plugs. 12 per pack, sold individually. Display packed.
|
15.99 |
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Push-In Drain Plug for 1-1/8" Thru-Hull & All Purpose Drains
These push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.
Plugs are a perfect compliment to T-H Marine overflow drain tubes.
These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
|
7.02 |
|
|
Push-In Drain Plug f/1-1/2" Thru-Hull Drains
These push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.
Plugs are a perfect compliment to T-H Marine overflow drain tubes.
These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
|
11.26 |
|
|
Walbro FRA-1-1 Electric Fuel Pump
Voltage: 12V DC
Weight: 1.63 lb
Minimum Flow Rate: 20 gph
Dry Lift: 24"
Service Life: 5,000+ hr
Fuse: 5A
Current Draw: 2.0 Amps
Inlet/Outlet: 1/8-27 NPSF
Inlet Filter Screen: 70 Micron
Magnetic Trap: None
Outlet Check Valve: No
Maximum Output Pressure: 4.0 - 7.0 psi
The FRA Series electric fuel pump operates at a constant frequency — it will continue to cycle as long as electric power is supplied.
If there is no demand for fuel, the pump will build pressure in the fuel delivery line - up to its rated maximum pressure - and continue to cycle, but with no fuel output.
As such, it is not well-suited for continuous operation/low demand applications such as heater or stove systems, since it will constantly make noise, and have a shortened service life due to high cycling.
For stove/heater and continuous duty applications, use the Walbro FRD series of pumps, which addresses these issues. See Related Products, below.
An FRA pump can be used, however, to fill a gravity-feed day tank commonly used in diesel stove and heater installations.
FRA pumps incorporate a new piston mechanism which, unlike rubber diaphragms, is not affected by modern, high-tech fuel blends.
The FRA is designed to serve as a primary pump (replacing a mechanical fuel pump) or as an auxilliary fuel pump (assisting the existing pump) for internal combustion engines.
The pump self-regulates to its pre-set pressure, pumping more or less fuel as the delivery pressure (head) varies.
FRA pumps are commonly used as replacements for failed mechanical fuel pumps on older engines, where the owner doesn't want to continue using a pump with a rubber diaphragm susceptable to degradation by modern alcohol fuel blends.
They are also commonly used in open flow, low head applications such as fuel polishing.
• Non-adjustable maximum output pressure is factory pre-set in the ranges indicated below
• Output pressure can be further regulated by screwing in, or placing in-line, an adjustable pressure regulator such as the HOL 12-804
• FRA provides low cost with good durability
• Compatible with all commercially available pump grade gasoline, gasoline-alcohol blends, diesel, and bio-diesel fuels
• Continuous duty life (diesel fuel): >5,000 hours
• Flow rates as high as 52 gph, but 30 gph is a more typical maximum
• Current draw averages less than 2 amps
• Self-priming to at least 2 feet; maximum dry run time is 4 hours
• Inlet (bottom)/Outlet (top): 1/8-27 NPSF (Dryseal American National Standard Straight Pipe Thread) — will accept NPT tapered fittings without leaking, thread sealant recommended
• No internal filter - a 70 micron, or finer, pre-filter is recommended
• USCG 16623-1 and 16623-2 approved; ignition protected
• Dichromate coating passes 96 hour salt spray test - not recommended where exposed to saltwater
• Dimensions: 5.43"H x 2.76"Dia.
• Note - a suffix number (typically -1 or -2) in part number refers to type of packaging
• Made in USA
Technical
Selecting among the Walbro FR Series electric fuel pumps:
• All the FR electric pumps provide fuel until the fuel demand decreases, or flow is restricted - but they have different mechanisms for doing so.
FR pumps will cycle (pump) until they build up the pressure (head) in the outflow line - with an accompanying decrease in fuel flow - and reach their factory preset maximum pressure.
At this point, constant frequency pumps like the FRA will continue cycling - but no fuel will flow.
Variable frequency pumps, like the FRB and FRD, will slow and eventually stop cycling as the pressure builds.
If the pressure on the outflow side of the pump drops, both types of pump will start supplying fuel again.
• Choosing an FR Series pump is often less dependent on the application, and more a matter of user preference:
— FRA pumps are lower cost, basic models.
They have no built-in filter, and their constant cycling means electric current draw is constant - regardless of output, they are always making noise, they typically have a shorter lifespan (higher wear), and they can wear unevenly as the stroke can be shortened when operating near their maximal pressure.
— FRB and FRD pumps have a more expensive variable frequency circuit board, always use their full stroke length - so wear is evenly distributed, do not always operate at full capacity/maximal cycling — so less wear, longer life, less noise, and lower average current draw.
Additionally, the FRB models include a built-in/replaceable 70 micron mesh filter, so the user doesn't need to supply a pre-filter.
• What the FR fuel pump is designed to do:
— In carbureted applications - The FRA and FRB fuel pumps self-regulate to their maximum output pressure when the carburetor bowl is full, and respond to float movement in the carburetor as required.
When the engine demands more fuel, the pump increases its flow rate.
When the engine demand drops, the pump reduces its flow rate.
— In diesel applications - The FRA and FRB pumps will deliver fuel to the diesel injector pump, assuring a positive pressure at the injector pump inlet.
These pumps are designed to refill diesel filters after service or replacement.
— In transfer applications, including fuel polishing, FRA and FRB pumps run continuously, as long as electrical power is supplied to the pump, and output back pressure is low.
— In diesel heater and stove applications, the task-specific FRD pumps will slow their cycling rate to deliver only the fuel required by the stove fuel metering valve ("carburetor").
FRD pumps can also fill day tanks in gravity feed installations.
|
331.94 |
|
|
Little Giant Submersible Pump 501003
Item: 501003
Model: 1
Little Giant's small submersible oil-filled pump features a epoxy coated cast aluminum housing. Designed for commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This compact 205 GPH pump features a 1/4" MNPT discharge, 7.4' shut-off head capability, and screened inlet.
501003 For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild chemicals such as soap solutions, acids, plating solutions, and fertilizers.
HP: 1/150 hp
Frequency: 60 Hz
Amps - Full Load: 1.1 A
Full Load Watts: 70 W
Volts: 115 VAC
Cord Length: 6 ft / 1.83 m
Max Flow Rate - 60 Hz: 3.42 gpm / 205 gph / 776 Lph / 12.93 Lpm / 0.78 m³/h
Flow Rate At 1ft: 3.42 gpm / 205 gph / 776 Lph / 12.93 Lpm / 0.78 m³/h
Shut-Off: 7.4 ft / 2.26 m
Shut Off Height - 60Hz: 7.4 ft / 2.26 m
Max PSIG - 60Hz: 3.2 PSI
Max Fluid Temperature: 120°F
|
167.70 |
|
|
Cat Pump Flange Mount
Use the CAT Pumps 8021 Assembly to safely mount a 3-frame pump. This is an OEM CAT Pumps accessory.
Used with CAT Pumps 230, 240, 270 pump models
Genuine CAT Pumps component
|
121.68 |
|
|
Sierra gaskets for Mercury outboard water pumps and impellers.
|
6.59 |
|
|
Delivers industry standard/USCG anti-siphon protection on all gasoline powered boats. Rugged aluminum construction with convenient hose barb design.
|
20.99 |
|
|
Little Giant Submersible Pump, 230Volt
Little Giant- Submersible Pump, 115Volt 60Hz 1/150HP Permanently Lubricated Oil Filled Motor, 205GPH at 1 Foot Head, Shutoff Head 7.4 Feet, Inlet: Screened, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Aluminum Housing, Viton Seal, Fluid Temperature Up to 120F (49C), UR/C-CSA Listed, 6 Foot Power Cord- No Plug
More Info: 501020, Submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. For pumping unheated metal parts cleaning solvent that is UL classified as PJQU. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F
|
200.46 |
|