Designed to seal air chamber under deck. Just pop in for a secure, tight fit. Can also be used as livewell or baitwell plug. Bulk.

Little Giant Cent. Pump 555101 Little Giant UPSP-5 Centrifugal Utility Pump Motor 115 Volt 60 Hz 1/2 HP Intermittent Duty Motor, 1152 GPH at 20 Foot Head, Shutoff Head 105 Feet, Inlet: 3/4" FNPT, Outlet: 3/4" FNPT, with 3/4" Male Garden Hose Fittings, Self-Priming to 15 Feet, Cast Iron Housing, Thermoplastic Impeller, Mechanical Seal, Fluid Temperature Up to 140F (60C), UL/CSA Listed, 10 Foot Power Cord   555101 Non-submersible, in-line, portable utility transfer pump with rugged one-piece cast iron housing and integral carrying handle. Self-priming to 15' when priming chamber is filled. Ideal for flooded basements, watering lawns and draining water heaters. Can also be used to boost water pressure for washing vehicles, sidewalks and more.

Little Giant Sump Pump 505055 Little Giant WRS-5 Basin Sump Pump Basin features 5 Gallon Polypropylene lightweight Tank that is corrosion-resistant it is designed with O-rings for a water tight seal the Cover includes removable filter for easy cleaning. The Cover includes 1/1/2" FNPT (38 mm) discharge and intake opening, and 2" FNPT (5 cm) vent opening, IAPMO listed, Pre-assembled, ready to install   &505055 Removes water from laundry trays, lavatory sinks, wet bar sinks, dehumidifiers, air conditioners (condensate), water softeners, etc. Installs above floor, no need to dig a sump. Unit is pre-assembled and ready to install.

Push-In Drain Plug for 1-1/8" Thru-Hull & All Purpose Drains These push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains. Plugs are a perfect compliment to T-H Marine overflow drain tubes. These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal.  They have double seal rings to assure positive sealing.     

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

Aqua Jet WD 3.5 GPM 12V Pump Kit Features: Max 13 I/min/3.5 GPM Max Pressure 70 psi / 5 bar 7.5 m / 25' coiled hose 1/2" I.D Bulk Head fitting with Valve PUMProtector inlet strainer Spray nozzle with check valve

March TE-5.5C-MD Mag-Drive Centrifugal Pump single phase with 115/230V Motor   Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.   March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.   Unit System 60Hz 50Hz Max Flow 30 GPM 102 LPM Max Head 41 FT 9 M Power .33 HP .248 KW Electrical 1PH 115/230V                3PH 230/460V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)  

Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.    March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower air cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.      Unit System 60Hz 50Hz Max Flow 30 GPM 102 LPM Max Head 41 FT 9 M Power .33 HP .248 KW Electrical 1PH 115/230V                   3PH 230/460V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)

Little Giant Pump 584604 Little Giant TE-5-MD-HC Magnetic Drive Pump Motor 115/230 Volt 50/60 Hz 1/8 HP Totally Enclosed Fan Cooled Motor, 1200 GPH at 1 Foot Head, Shutoff Head 29.3 Feet, Inlet: 1" FNPT, Outlet: 1/2" MNPT, Ryton Body, Fluid Temperature Up to 200F (93C), UR/C-CSA Listed, 6 Foot Power Cord- Not Installed   584604 Magnetically driven pumps for circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions. The MD-HC Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use

Little Giant Pump 584504 Little Giant TE-5-MD-SC Magnetic Drive Pump Motor 115/230 Volt 50/60 Hz 1/8 HP Totally Enclosed Fan Cooled Motor, 1200 GPH at 1 Foot Head, Shutoff Head 29.3 Feet, Inlet: 1" FNPT, Outlet: 1/2" MNPT, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 6 Foot Power Cord- Not Installed   584504 Magnetically driven pumps for semi-corrosive chemicals and solutions. The MD-SC Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use.

Jabsco Flexible Impeller Pedestal Pump Ped Mt Neo Imp 3/8 FEATURES Pump Body: Bronze Port Size: 3/8" NPT Internal Flow: 7.5 GPM Impeller: Viton, Neoprene or Nitrile Shaft Seal: Nitrile or Viton Lip Type Shaft: 316 Stainless Steel     APPLICATIONS / CHARACTERISTICS Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. MARINE: Engine Cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump. INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc      Jabsco Flexible Impeller Pedestal Pump 3/8"NPT Neoprene Impeller

Iwaki WMD-20RLZT, 3/4 inch MPT in/outlet 174gph 120v Iwaki WMD 20RLZT Water Pump   American motor high pressure rated water pump. 3/4 inch MPT inlet and outlet. 1/38 HP Motor output. 3100 RPM motor speed. 120 volts 0.53 amps Max flow 2.9 GPM. 174 GPH Max head 22.6 ft. Max system pressure 14.22 psi.   WMD pumps have American Made Motors MD pumps have Japanese Made Motors RLT pumps are for pressure applications RZT pumps are for very high pressure applications RLXT pumps are for circulation and wet or dry return

Headhunter Mach 5 Freshwater Pump 115Volt The Mach5 water pressure system from Headhunter represents a next quantum leap in pump technology with many advanced features and improvements over conventional water pressure pumps. An integrated control system provides instant dry run protection, and allows the pumps to be used with or without a pressure accumulator tank. The Mach 5 pump incorporates a state-of-the-art multistage impeller system driven by a super-efficient water-cooled motor to generate up to 20 gallons per minute, instantaneously, on demand, and in virtual silence. An easy to read control panel on top of the pump provides visual indication of alarm status, as well as reset capability.   Product Details/ Specifications:   Liquid Temp. 32°F To 104°F Ambient Temp. 32°F To 122°F Max Pressure 67 PSI (4.5bar) Max Flow 20 GPM (76 lpm) Suction/Discharge 1” MPT (1”GAS) Noise Level <54 dB(A) Weight 23lbs (10.4 kg) Dimensions 18”(457mm)L-8 5/8”(219mm)W-13 ¼”(337mm)H   The Mach 5 has been tested and certified to surpass all requirements of Underwriters Laboratories UL 778 specifications for Motor Operated Pumps. The Mach 5 is CE approved.  

Headhunter MACH 5 230 volt 60hz Freshwater Pump The Mach5 water pressure system from Headhunter represents a next quantum leap in pump technology with many advanced features and improvements over conventional water pressure pumps. An integrated control system provides instant dry run protection, and allows the pumps to be used with or without a pressure accumulator tank. The Mach 5 pump incorporates a state-of-the-art multistage impeller system driven by a super-efficient water-cooled motor to generate up to 20 gallons per minute, instantaneously, on demand, and in virtual silence. An easy to read control panel on top of the pump provides visual indication of alarm status, as well as reset capability.   Product Details/ Specifications:   Liquid Temp. 32°F To 104°F Ambient Temp. 32°F To 122°F Max Pressure 67 PSI (4.5bar) Max Flow 20 GPM (76 lpm) Suction/Discharge 1” MPT (1”GAS) Noise Level <54 dB(A) Weight 23lbs (10.4 kg) Dimensions 18”(457mm)L-8 5/8”(219mm)W-13 ¼”(337mm)H   The Mach 5 has been tested and certified to surpass all requirements of Underwriters Laboratories UL 778 specifications for Motor Operated Pumps. The Mach 5 is CE approved.    

Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-3/8 may have been modified to handle these chemicals.   March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.      Unit System 60Hz 50Hz Max Flow 2.3 GPM 8.7 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ          230V 50/60HZ   Type Centrifugal Mag Drive Inlet 3/8"OD Outlet 3/8"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet