|
MP Pump 27385 Pump Series 110
MP Pumps 27385, Series 110 Standard End Suction Centrifugal Pump End Only, 1-1/2" x 1-1/4" NPT Ports, Capacity up to 130 GPM, Total Head up to 60 feet. S110PPK B: RR 1.5X1.25 7/8 3.9 NIP
|
2178.90 |
|
|
MP Pump 25039 Pump Series 110 Brz
MP Pumps 25039, Series 110 Standard End Suction Centrifugal Pump End Only, 1-1/2" x 1-1/4" NPT Ports, Capacity up to 130 GPM, Total Head up to 60 feet. S110PPK B: RR 1.5X1.25 5/8 2.87 IMP
|
2259.00 |
|
|
MP Pump 24321 Pump Fm5Pmp C:Pedestl 5.0Bi
The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron, bronze or aluminum construction to suit a wide variety of liquids. All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life. Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
|
1154.70 |
|
|
MP Pump 23241 Pump Series 110 Ci Gas Eng
MP Pumps 23241 Series 110 End Suction Centrifugal Pump Cast
The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron, bronze or aluminum construction to suit a wide variety of liquids. All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life. Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
|
814.50 |
|
|
MP Pumps 36067 PUMP HHLF HR 2" GAS/DIESEL
MP Pumps 36067, HHLF High Head Low Flow Self Priming Centrifugal Pump End Only, 1-1/2" or 2" x 1-1/2" or 2"
High Pressure USCG Secifications Auxilary Fire Control HHLF2.0PPK B: ENG 1.0 6.7 HR
|
5163.79 |
|
|
MP Pumps 31988 VOLUTE CI HHLF
|
467.00 |
|
|
MP Pumps 22468 3" CI INLET FLG
|
88.61 |
|
|
MP Pumps 21384 PUMP FM15 CI 1 1/8 MTR MNT
|
1640.70 |
|
|
MP Pump 22348 Bracket C/I Eng Dr
|
345.28 |
|
|
MP Pump 21326 Pump FM8 Brz 3/4" Eng Mt
MP Pumps 21326
FLOMAX 8 Self Priming Centrifugal Pump End Only
2" X 2" NPT Ports
Capacity up to 150 GPM
Total Head up to 100 feet
FM8PPK B: PEM 3/4 5.0
|
2795.36 |
|
|
MP Pumps 36088 2" PEDESTAL HHLF-CI PUMP
MP Pumps HHLF High Head 140 GPM Self Priming Cast Iron 2" NPT Centrifugal Pump #36088. Up to 140 GPM, 3600 RPM, cast iron construction. The volute and impeller are removable and easily replaced. All pumps fitted with stainless steel fasteners and viton mechanical seals.
Meets USCG Secifications for Auxilary Fire Control
Specifications
Rated Capacity 140 GPM Impeller Size: 6.5"
Suction & Discharge Connections: 2" NPT
Construction: Cast iron housing, impeller and adaptors; 304 SS drive sleeve; stainless steel fasteners; Carbon/Ceramic/Viton seal type 21.
|
1944.90 |
|
|
Applications for the March 821-CI Magnetic Drive Pump include hot water and hot oil systems.
March Pump's industrial 821-CI is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 22 gallons per minute at 2.5 feet, and its maximum head is 8.5 Feet (or around 3.6PSI). The standard wet end (the materials that come into contact with the solution) is composed of Cast Iron, Stainless Steel, Ryton, Ceramic, Carbon, and Nitrile/Fibre. The inlet connection is a flange, and the outlet is a flange. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Unit System 60Hz 50Hz Max Flow
22 GPM
75.7 LPM
Max Head
8.5 FT
1.6 M
Power
.05 HP
.037 KW
Electrical
115V 50/60HZ or 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
Flange
Outlet
Flange
Wet End
Cast Iron (Front Housing), Stainless Steel (Rear Housing, Shaft), Ryton (Impeller), Ceramic (Thrust Washer), Carbon (Bushing), Nitrile/Fibre (Gasket)
|
780.30 |
|
|
MP Pumps 21354, FLOMAX 10 Self Priming Centrifugal Pump End Only
2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: PEM 6.0
|
1428.30 |
|
|
Complete coverage on everything from basic maintenance to complete engine or drive overhaul. Featuring simple-to-follow, step-by-step, illustrated procedures, hundreds of exploded views, photographs, tables, wiring diagrams, specifications, and user friendly indexes. Newer manuals contain a skill level rating system for each procedure as well as special tool icons.
|
55.99 |
|
|
Complete coverage on everything from basic maintenance to complete engine or drive overhaul. Featuring simple-to-follow, step-by-step, illustrated procedures, hundreds of exploded views, photographs, tables, wiring diagrams, specifications, and user friendly indexes. Newer manuals contain a skill level rating system for each procedure as well as special tool icons.
|
55.99 |
|