 |
Adapts 1996 and newer Johnson and Evinrude engines to 1995 and older boat side controls.
|
168.15 |
|
 |
Y-Adapter Harness Kit for HE-WRRK
From the leader in the lighting industry. This universal wire harness is for DT connected lights and wire harnesses and allows a full-length installation. Works in conjunction with HE-WRRK.
Fully loaded and ready to be installed with two (2) Heise light bars (22" or smaller) and Heise cube lights.
Specifications:
9' in Length
Black in color
In the Box:
One (1) Y Adapter
One (1) Extension
*Sold as an Individual
|
38.06 |
|
 |
30AM/15AF Power Grip Marine 12" Dogbone - M-Locking/90F Adapter
The Camco 30 amp male locking end to 15 amp female standard end adaptor is a 12-inch adapter cord with a threaded locking ring that creates a weatherproof connection on the 30 amp male side. The durable STW cord is used to convert a 30-amp marine type connection to a 15-amp standard receptacle. Use this adaptor to plug in common tools, radio, lights, blender, etc. to a marine type power pedestal. Rated for 125 volt.
Features:
30 amp locking NEMA L5-30P male end with 15 amp NEMA 5-15R female end
12-inch adapter
Threaded locking ring creates a weatherproof connection
Durable, long-lasting 10/3 STW cord
90 degree turn from male to female end
|
46.63 |
|
 |
Wireless Remote Control & Relay Harness
From the leader in the lighting industry. This wireless RF remote control and and relay harness is the standard in making any Heise light function via remote control.
The HE-WRRK is a wireless remote control and receiver with a simple 2 wire connection to the battery so no wires are needed to be ran inside the vehicle. It is designed to be used with one HEISE LED light bar, driving light, or work light.
If an additional light bar is desired the HE-EYHK (Y ADAPTER HARNESS KIT) can be purchased which allows two HEISE light bars, driving lights, or work lights 150 watts or less each to be used with the HE-WRRK
Specifications:
Nine (9) Different Flash Options
9' Harness Length
Black in color
In the Box:
One (1) Remote Control Receiver
One (1) Battery Operated FOB
One (1) Extension
One (1) Adapter
*Sold as an Individual
|
73.39 |
|
 |
Fits: OMC 50-60 HP 2-cylinder. Replaces: OMC. 384163, 387684, 389275, 585063, 586280. 9-tooth drive gear. Uses DV371* replacement drive gear, DVK71* 2-piece drive kit (fits current-model starters), SR371 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
196.32 |
|
 |
Fits: OMC 18-40 HP. Replaces: OMC 386591, 392133, 585061, 586278. 11-tooth drive gear. Uses DV376* replacement drive gear, DVK76* 2-piece drive kit (fits current-model starters), SR376 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
173.45 |
|
 |
Fits: OMC 1985-Up, 120-140 HP V4. Replaces: OMC. 393570, 585060, 586285. 10-tooth drive gear. Uses*DV386 replacement drive gear, *DVK86 2-piece drive kit (fits current-model starters), SR386 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
186.39 |
|
 |
Fits: OMC 25, 40, 50 HP; 2-cyl - 1989-Up; 48-50 HP - 1990-Up. Replaces: OMC. 583482, 585056. 9-tooth drive gear. Uses *DV389 replacement drive gear, *DVK89 2-piece drive kit (fits current-model starters), SR389 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
202.41 |
|
 |
Fits: OMC 20-35 HP 2-cyl - 1987-93. Replaces: OMC 583473, 585059. 9-tooth drive gear. Uses *DV390 replacement drive gear, *DVK90 2-piece drive kit (fits current-model starters) SR390 repair kit.*NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
180.50 |
|
 |
Fits: O.M.C. 55-75 HP 3-cylinder. Replaces: OMC 384777, 386657, 391735, 585050, 585058, 586281. 9-tooth drive gear. Uses DV370* replacement drive gear, DVK70* 2-piece drive kit (fits current-model starters), SR370 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older O.M.C. outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
215.00 |
|
 |
Fits: OMC 85-140 HP late-model V4. Replaces: O.M.C. 385529, 389954, 585051, 585057, 586283. Small 10-tooth drive gear. Uses DV372* replacement drive gear, DVK72* 2-piece drive kit( fits current-model starters), SR372 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
180.12 |
|
 |
Round plug engine harnesses for Johnson and Evinrude engines.
|
306.38 |
|
 |
Round plug engine harnesses for Johnson and Evinrude engines.
|
177.82 |
|
 |
Sierra replacement bellows and boots for OMC Sterndrive, Cobra and Volvo engines.
|
204.99 |
|
 |
Fits: OMC 150-235 HP V6. Replaces: OMC 387094, 395207, 585062, 586288. 8-tooth drive gear. Uses DV373 replacement drive gear, SR373 repair kit.
|
202.64 |
|
