Fuel Tank Strap Set - 48 (inches) Long for 3-6 Gallon Tanks This Attwood Fuel Tank Strap Set contains everything needed to secure a 3-6-gallon fuel tank in place. This kit includes a 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place. Features: Includes 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle Run the strap through footman loops, then tighten and buckle to hold the tank in place

Fuel Tank Strap Set - 72 (inches) Long for 12 Gallon Tanks This Attwood Fuel Tank Strap Set contains everything needed to secure a 12-gallon fuel tank in place. This kit includes a 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place. Features: Includes 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle Run the strap through footman loops, then tighten and buckle to hold the tank in place

Portable Fuel Tank - 6 Gallon without Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine.  Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *No gauge or fuel line included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Portable Fuel Tank - 6 Gallon with Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge. Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting High-contrast & easy to read gauge Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *Fuel line is not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MDM Pumps G1W-AO-F 3X2-6 Ver Peo Low Flow

MDM Pumps G1X-AO-F 3X2-6 Ver Peo Low Flow

MDM Pumps G3Z-AO-F 3X2-6 Ver Peo High Flow

MDM Pumps G3Y-AO-F 3X2-6 Ver Peo High Flow

FINISH THOMPSON A101990-3 6 POLE MAGNET

1700 Series Water Heater 120v 6 Gallon With Engine Heat Exchanger The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank. Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently. Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT. Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

974 MSD Portable Toilet with Mounting Brackets - 2.6 Gallon - Grey Powerful flushing at the touch of a button sets the new 970 portable toilet series apart from the rest.  Requires no manual pumping or batteries, yet delivers a robust bowl-clearing flush every time.  The 9.8 L tank, with a tank level indicator, contains enough water for 27 flushes.  When it is time to empty it, the extra-long discharge pipe is a sure safeguard against mess.  Just as convenient as a household toilet. Due to an innovative product design, this high-quality toilet offers powerful flushing with less pumping as well as splash-free operation and discharge.  Easy to use push-button operation. Features: High-strength ABS construction withstands harsh environments; smooth, easy-to-clean finish Prismatic tank level indicator allows easy tank level monitoring Less mess due to an extra-long pivoting discharge spout Push-button flush clears bowl instantly Full-size seat for comfort Latching lid for security Includes mounting brackets Comes with Marine Sanitary Device (MSD) which allows the toilet to be plumbed for direct overboard, dockside pump-out, or remote tank discharge Technical Specifications: Color - Grey Flush Method - Manual Handle Capacity - 2.6 Gallon/9.8 L Seat Close - Standard Weight - 12 Pounds Set Height - 12.5" Size - 15.25" Depth x 12.5" Height x 13-2/16" Wide Water Supply - Freshwater (self-contained) Discharge - Spout on bottom of tank or MSD fitting kit New Item # 9108552690  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Tank Monitor The finest holding tank monitor available with easy-to-read tank level indicators. Monitors up to four tanks from one convenient location. The Tank Monitor provides convenient, reliable, maintenance-free monitoring of one to four fresh, gray and waste water tanks. All components are mounted outside of the tanks for dependable operation, eliminating the need for special tank fittings and the inevitable maintenance of internally mounted tank sensors. The tank monitor has no moving parts. The indicator panel clearly displays a tank's contents (or reserve) by selecting the tank on the touch pad. The tank's content is displayed at quarter tank intervals (i.e. EMPTY, 1/4, 1/2, 3/4 and FULL) with easy to understand international symbol labels (which are provided). The Indicator Panel is rugged, flush mounted and has no protruding parts. The tank module senses the contents of the tank and sends a signal to the indicator panel. The electronic components are completely encapsulated, protecting them from the harshest environments. Benefits All parts are mounted outside of the tanks - eliminates need for special tank fittings Reliable electronic design protected for the marine environment Can be used with any polyethylene or fiberglass fresh, gray and waste water tanks Easy to use No maintenance required Gold-plated connectors ensure consistent and trouble free performance Simple installation Low power consumption No internal probes or floats Flush-mounted indicator panel has a smooth surface (no protruding switches or gauge) Each unit is assembled by hand, individually tested and backed by Raritan's one-year Limited Warranty and legendary technical support team For use on non-conductive tanks (polyethylene, fiberglass, etc.). NOT FOR USE ON FUEL TANKS WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery/Gas Tank Tie-Down - 48" A 48" long polypropylene belt with two nickel coated steel footman loops and a super lock quick release buckle for easy tightening. Will hold gas tanks or batteries securely.

Stainless Steel Battery/Gas Tank Tie-Down - 48" A 48" long polypropylene belt with two nickel coated steel footman loops and a heavy duty stainless steel 1" quick release buckle for easy tightening. Will hold gas tanks or batteries securely. 

EPA/CARB approved. For applications with 2 prong barb engine fitting; 1998 and newer Mercury, most Evinrude/Johnson and most Yamaha outboard engines. Kit includes tank connector with sealant, quick disconnect to tank fuel connector, hose clamp, universal fuel line and 3 fuel line connectors for Evinrude/Johnson, Mercury and Yamaha.