|
CLA2000 Deep Sea Class A AIS Transponder
Digital Yacht’s CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder. Water and weather proof to IP67, it has a full integrated 5” hi-res colour display supporting a wide range of functionality including electronic chart navigation with optional C-Map MAX charting and AIS target management.
Proven, superior real world AIS message receive and transmit and message processing performance is delivered by advanced core SDR AIS technology. This state of the art technology ensures you see more targets, more of the time and at maximum range.
The CLA2000 will find applications on SOLAS mandated vessels over 300GRT as well as workboats, rescue services, inland waterways users, RIBs, large yachts and any user wanting premium AIS performance and safety.
The CLA2000 has optimised software for detecting AIS SART and MOB devices with a dedicated icon for this class of AIS. An automatic alarm is activated on detection of an AIS SART beacon activation. The target plot display will also calculate relative bearing of the device for easy visualisation of the target and rescue.
The CLA2000 is fitted with a micro SD card reader located behind a waterproof cover on the front panel. This can support software updates, data logging of AIS and position data to a blank card as well as compatibility with C- Map MAX charting cards for optional detailed back ground charting.
The CLA2000 has an integrated wireless interface for sending AIS and position data to smart phones, tablets, PCs and MACs for use with 3rd party charting and navigation apps. It supports client mode where it can connect to an existing wireless network or AP mode where devices can connect directly to the CLA2000. Up to 5 simultaneous/connected devices are possible.
Features:
Globally approved Class A AIS transponder
High resolution, 800 x 480 pixel 5” colour display (MKD) with easy to use, fast user interface
Bracket or flush mount – waterproof to IPX7
Integrated GPS with external antenna or utilise external NMEA feed (user selectable)
3 x NMEA 0183 interface (bi-directional for plotter, ECDIS, radar etc)
3 x sensor input ports (eg BlueBoard, external GNSS, gyro etc)
NMEA 2000 interface
Built in SD card slot for software updates, AIS data port logging or C-Map MAX mapping capability with optional C-Map data card
Built in wi-fi for connection to iPads and tablets for wireless navigation
Sophisticated AIS SART MOB alarm and display capability
User programmable alarms for CPA and TCPA
Advanced filtering of targets
External alarm and remote silence switch capability
|
2183.95 |
|
|
Class A AIS Bundle with Free CX4A AIS Antenna
CLA2000 Deep Sea Class A AIS Transponder
Digital Yacht’s CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder. Water and weather proof to IP67, it has a full integrated 5” hi-res colour display supporting a wide range of functionality including electronic chart navigation with optional C-Map MAX charting and AIS target management.
Proven, superior real world AIS message receive and transmit and message processing performance is delivered by advanced core SDR AIS technology. This state of the art technology ensures you see more targets, more of the time and at maximum range.
The CLA2000 will find applications on SOLAS mandated vessels over 300GRT as well as workboats, rescue services, inland waterways users, RIBs, large yachts and any user wanting premium AIS performance and safety.
The CLA2000 has optimised software for detecting AIS SART and MOB devices with a dedicated icon for this class of AIS. An automatic alarm is activated on detection of an AIS SART beacon activation. The target plot display will also calculate relative bearing of the device for easy visualisation of the target and rescue.
The CLA2000 is fitted with a micro SD card reader located behind a waterproof cover on the front panel. This can support software updates, data logging of AIS and position data to a blank card as well as compatibility with C- Map MAX charting cards for optional detailed back ground charting.
The CLA2000 has an integrated wireless interface for sending AIS and position data to smart phones, tablets, PCs and MACs for use with 3rd party charting and navigation apps. It supports client mode where it can connect to an existing wireless network or AP mode where devices can connect directly to the CLA2000. Up to 5 simultaneous/connected devices are possible.
Features:
Globally approved Class A AIS transponder
High resolution, 800 x 480 pixel 5” colour display (MKD) with easy to use, fast user interface
Bracket or flush mount – waterproof to IPX7
Integrated GPS with external antenna or utilise external NMEA feed (user selectable)
3 x NMEA 0183 interface (bi-directional for plotter, ECDIS, radar etc)
3 x sensor input ports (eg BlueBoard, external GNSS, gyro etc)
NMEA 2000 interface
Built in SD card slot for software updates, AIS data port logging or C-Map MAX mapping capability with optional C-Map data card
Built in wi-fi for connection to iPads and tablets for wireless navigation
Sophisticated AIS SART MOB alarm and display capability
User programmable alarms for CPA and TCPA
Advanced filtering of targets
External alarm and remote silence switch capability
CX4A Commercial AIS/VHF Antenna
Powerful AIS Tuned commercial VHF Antenna that will give you maximum AIS range. Has a SO239 antenna connector in the base of the Antenna and we recommend using this with low loss 50 ohm coax cable such as RG-213 for best performance (not supplied), particularly on long cable runs.
A very high quality 3dB AIS tuned GRP antenna which is ideal for professional and super yacht installation.
Specifications:
3dB AIS tuned GRP antenna
4ft long
Fit 1.25″ commercial grade fixing bases
|
2309.95 |
|
|
Class A AIS Transponder
Furuno's FA170 is a Class A AIS Transponder with a 4.3" Color LCD Display. It displays symbols for AIS-equipped vessels, AIS-SARTs, coastal stations, and other aids to navigation within the VHF range. AIS data can be output to ECDIS, Radar, or other navigational equipment for collision avoidance support.
The FA170 includes 6 in/out ports, 3 input-only ports, one LAN port, and one alarm output (contact closure) port. The unit is BAM (Bridge Alert Management) ready, meeting the specific requirements for BAM as specified in IMO MSC.302 (87). An optional Pilot Plug is available.
This compact unit can store up to 2,048 AIS targets and AIS sarts. Selecting a target from the list generates a pop-up window where detailed information is displayed. You can also create an AIS message or send a name request to the target ship.
When dangerous targets are detected, the FA170 provides a Dangerous Target list. The FA170 is also capable of exchanging short, safety-related messages with a specified MMSI or all AIS-equipped vessels via VHF channels. The FA170 can store up to 20 transmitters and 20 received messages.
Features:
Class A AIS Transponder with 4.3" Color LCD Display
Displays Information about AIS-equipped ships, as well as coastal stations and Aids to Navigation within VHF coverage
Outputs AIS data to ECDIS, Radar, and other navigational equipment
Sufficient output ports for dual configuration of ECDIS and Radar Systems
LAN Interface available for simple and efficient network integration
BAM (Bridge Alert Management) is ready
Optional available Pilot Plug
Receives AIS-SART signals for assisting in streamlining SAR activities
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4174.50 |
|
|
Raymarine AIS4000 Class A Transceiver
Designed for commercial vessels, luxury yachts, and SOLAS high-seas shipping, the AIS4000 Automatic Identification System (AIS) transceiver delivers robust Class A AIS network capability and is engineered to withstand the harsh weather, shock, and vibration of any vessel class.
The AIS4000 boasts a high definition color display for quick access to integrated charts, alarms, and tracking. Additional support for wired and wireless networking with shipboard systems make AIS4000 a premier SOLAS and Inland Waterway-certified Class A transceiver.
RUGGED AND VERSATILE
Designed for harsh conditions, AIS4000 is right at home on any vessel class.
Certified to the highest industry standards for waterproofness, shock, and vibration
Compact enclosure with NMEA2000 and NMEA0183 connectivity
Junction box included for expanded shipboard sensor and ECDIS connectivity
Flexible overhead, bulkhead, desktop, and surface mount options
BOLD, BRIGHT, AND HIGHLY CAPABLE
The full-featured AIS4000 brings a new level of functionality to Class A transceivers.
Large 5” 800 × 480 color display
Integrated Wi-Fi
NMEA 2000
Easy-to-use, intuitive interface
ADVANCED CLASS A AIS CAPABILITIES
AIS4000 is a full-function Automatic Identification System transceiver certified for SOLAS and Inland Waterway applications.
Fourth generation AIS technology for expanded speed, range, and processing performance
Full color target display with optional C-MAP ENC mapping
Integrated Man Overboard/PLB alerting and tracking system
CPA/TCPA data and alarms
Specials Closeouts Remanufactured Rebates
|
|
|
PilotLINK2 Class A Pilot Plug WiFi Interface
There are well over 100,000 Class A AIS systems installed on vessels globally. While the latest Class A AIS transponders (like the Digital DeepSea CLA2000) already have a wireless interface incorporated for iPad and tablet connectivity, many systems just use a standardized “Pilot Plug” wired interface. This Amphenol standard multi-pin design allows NMEA AIS and GPS data to be accessed from the transponder and pilots and delivery captains would use a simple USB interface cable for their personal PC-based ECDIS system. However, more and more captains now choose to use an iPad or tablet so need wireless connectivity.
PilotLINK2 allows these Class A transponders to interface with the latest range of mobile devices including iPhones, tablets, and PCs/MACs. Applications range from maritime pilots to survey ship charter users who may want access to the ship’s AIS and GPS data.
Features:
Connects to any standard “Pilot Plug” connector
USB powered for easy portability power from any USB source, adaptor, or power pack
Creates secure password protected wifi network
Can also join another wifi network if preferred
Easy web interface with useful diagnostics display and Class A static, dynamic, and voyage data displays
Works with 100’s apps iSailor, Navionics, iNAVx, NavLINK, TZ iBoat, Imray, NV Charts, AquaMaps, Weather 4D, etc
TCP/IP and UDP protocols supported
The raw data log function
Interface
Set up of PilotLINK is simple using any web browser on the connected device. View data, set up wireless passwords or join another wireless network and also view Class A AIS status. Your favourite apps connect using TCP/IP or UDP protocols.
The data monitor shows a list of raw NMEA data. You can also log this data for analysis if required.
|
251.95 |
|
|
AIT1500 Class B AIS Transponder w/Built-In GPS
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click to download form.
Designed specifically to bring the benefits of Class B AIS to smaller vessels, it uses a high sensitivity internal GPS antenna to save on space and cut down on installation time. Simply connect to power and a plotter, plug in a VHF antenna and you're in business.
The regulations for AIS demand that the Class B transponder has to incorporate itsown GPS positioning receiver which normally involves fitting an external antenna. TheAIT1500 incorporates a high sensitivity GPS antenna within its compact case whichsaves on antenna clutter and makes for a speedy installation. It's ideal for fitting onsmaller vessels and tenders. It uses a NMEA0183 interface for simple connectionto the vast majority of AIS compatible chart plotters and also has a separate 4800baud GPS data output for the DSC VHF if required. It consumes less that 2W powerand can operate on 12/24V systems. It also features a silence capability so the AIStransmissions can be muted while continuing to receive AIS traffic.
There is a USB interface for programming as well as for PC/MAC based navigation.It's compatible with Digital Yacht's NavLink MAC app and SmarterTrack PC navigationsystem.
GPS signals will pass through plastic, glass and GRP so it will be able to be mountedbelow decks on many boats. A dedicated VHF antenna is required for the AIS or asuitable VHF-AIS antenna splitter such as the SPL2000. It can also connect to theWLN10.
Features:
Advanced AIS design for the best performance
Waterproof compact enclosure
Built in internal GPS antenna
Dual NMEA 0183 outputs at 4800/38400 baud
USB interface
PC & MAC programming software included
NMEA input multiplex function
Silence switch option
Supplied with programming and utilities CD
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
629.95 |
|
|
SAS-900 6" Color Class A AIS Transceiver
Internationally Certified SOLAS Class A AIS Transceiver
SAS-900 is the world's most sophisticated and robust SOLAS and Inland-Waterway certified AIS Class A Transceiver.
Fourth generation AIS technology delivers unmatched real world AIS receive, transmit and message processing performance and reliability. Quality engineered and manufactured without compromise, with features such as IPX7 weather proofing and integrated shock and vibration protection for continuous long term operation in even the harshest commercial or military environment.
A large integrated high definition color screen maximizes the benefit of the SAS-900's powerful Electronic Chart display engine with full detailed chart AIS overlay, and multiple target management functionality, including innovative MOB features and many more.Charts are C-Map Max software in MicroSD card.
|
2351.16 |
|
|
Voyager X5 Class A AIS Transceiver
Features:
World’s most sophisticated yet simple to use Class A AIS transceiver
SOLAS, MED, CE, FCC, Inland Waterway and Industry Canada certified
Meets IMO Resolutions: A.694 (17), MSC.191 (79), MSC.74(69) , ITU-R M.1371-5(2014)
Supports GPS, GLONASS, GALILEO & BEIDOU (satellites removed)
MOB & SART alert tracking
Collision Alert
AIS data target overlay on standard radars and multi-function chart displays
Effective port traffic management using Class A and Class B data
|
2827.33 |
|
|
A200 Class A AIS Transceiver
The A200 Class A is both SOLAS and Inland Waterway certified and offers superior performance through its advanced, next-gen technology. The A200 has been engineered for even the harshest marine environments, undergoing extensive testing by independent experts to ensure it is waterproof and unaffected by extreme temperatures, shock, and vibration so you don't need to worry about reliability issues impacting performance or longevity.
The A200 is easy to install and will seamlessly connect to your ECDIS and other bridge systems. The A200 delivers comprehensive AIS functionality, such as alerts, target filters, vessel information lists, real-time weather, and more.
With its integrated color display, the A200 plays an important role in tracking, collision avoidance, and CPA when vessels are in busy port areas. The combination of advanced performance, trusted reliability and competitive price make the A200 the best-value AIS Class A in the market by far.
Features:
IMO SOLAS certified AIS Class A
EU Inland Waterway certified ruggedized and impervious to extreme environments – water (IPx6, IPx7), dampness, shock, vibration, and temperatures
High performance latest generation GPS
Suitable internal or permanent external installation
Robust ergonomic button and rotary-knob user interfaces with configurable multi-lingual menu options
Integrated high-definition color display with night mode
ENC chart (C-Map) with configurable AIS target overlay
Silent mode – AIS transmissions are stopped, all AIS messages continue to be received
Integrated WiFi
Pilot plug cable and junction box accessory options
Physical & Environmental Specifications:
Size (H x W x D): 152 x 165 x 95mm
Weight: 1.1kg
Operating temperature: -25°C to +55°C
Storage temperature: -25°C to +70°C
Ingress protection: IPx6 and IPx7
Electrical Specifications:
Supply voltage: 12V or 24V DC
Supply voltage range: 9.6V - 31.2V DC
Average current (at 12V): 520mA
Peak current: 6A
Average power consumption (at 12V): 6.2W
Galvanic isolation: NMEA 0183, NMEA 2000, power supply, VHF antenna port
Connectors:
VHF antenna: SO-239
GNSS: TNC
Power: 2-way circular multipole
NMEA 0183/silent mode/blue sign: 14-way circular multipole
NMEA 0183/alarm relay: 18-way circular multipole
NMEA 2000: 5-way Micro-C connector
Data Interfaces:
NMEA 0183: 3 x input ports, 3 x bi-directional ports
NMEA 2000: NMEA 2000 Ed 3.101, LEN=1
WiFi: IEEE 802.11 (a/b/g), client mode, and access point mode supported. (5 connections in access point mode)
Standards Compliance:
AIS standards: IEC 61993-2 Ed. 3
Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013
Environmental standards: IEC 60945 Ed. 4
Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0
NMEA 2000: NMEA 2000 Ed 3.101
GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0
GNSS:
Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo)
Channels: 72
Internal/external antenna: External only
Time to first fix from the cold start: 26s
VHF Transceiver:
VDL access scheme: SOTDMA
Operating frequency: 156.025MHz - 162.025MHz
Channel bandwidth: 25kHz
Receivers/transmitters: 3 x receivers, 1 x transmitter
AIS receiver sensitivity (20% PER): -111dBm
AIS transmitter power: 12W (+41dBm)
User Interface:
Screen: 5-inch 800 x 480 full color LCD
Buttons: Rotary encoder for selection and entry, 4 menu keys, and 4 direction keys
SD card interface: Micro SD card interface for logging and chart cards (not available from em-trak)
GNSS Antenna:
Size: 85 x 70mm
Weight: 470g
Ingress protection: IPx6 and IPx7
Mounting: 1 inch 14 TPI pole mount required
GNSS systems supported: GPS, GLONASS, Galileo, BeiDou
In the Box:
1 x AIS transceiver
1 x Power cable
1 x Mounting bracket & fixings pack
1 x 14 Way data cable
1 x Product manual and document pack
1 x 18 Way data cable
|
2341.20 |
|
|
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click here to download form.
AIT5000 Class B+ 5W Transponder with Splitter & WiFi
The AIT5000 is a Class B+ AIS Transponder with a 5W power output, a Wi-Fi interface, a built-in VHF splitter and utilises SOTDMA format transmissions.
Digital Yacht have introduced a new range of Class B+ AIS transponders. Class B+, a new standard, utilises SOTDMA format transmissions which offer a 5W power output (2.5x more powerful than a regular Class B), a guaranteed time slot for transmission in busy traffic areas and faster update rates depending upon the speed of the vessel. It’s ideal for ocean sailors requiring the best possible performance and future proof satellite tracking applications, fast power boats and smaller non-mandated commercial vessels. It still inter-operates with existing Class B and Class A systems.
The AIT5000 incorporates a patented ZeroLoss VHF-AIS antenna splitter allowing the main VHF antenna to be shared with VHF, AIS and FM radio. It also has a wireless interface for connecting to iPads, smartphones and tablets.
The AIS transmissions can be stopped with our AISConfig app and with a remote silence switch.
The AIT5000 the option of an AIS SART alarm which is great for use with personal AIS MOB devices. Now works with the popular Navionics Boating App for Apple iOS and Android to display GPS and AIS data on your Navionics charts.
Features:
Class B+ 5W transponder with GPS/GLONASS positioning
Integrated and patented ZeroLoss VHF-AIS antenna splitter (share the VHF antenna)
Multiple NMEA 0183 in/out and multiplex capability
NMEA 2000 connectivity
USB connectivity for PC/MAC
Wireless interface for tablets, smartphones and PC
Remote TX silence switch option
Supplied with GPS antenna
The AIS all-in-one Nucleus solution
Alarm option too with AISLifeGuard
Class B+ is a new generation of AIS functionality based on SOTDMA (self organised TMDA) messaging rather than the simpler CSTDMA (carrier sense TDMA). It guarantees your AIS transmission will get a time slot, even in areas of very high traffic density. It also specifies a 5W transmission power (compared with 2W for Class B) and a transmission rate that increases as the vessel moves faster. With regular Class B protocol, the transmission rate is fixed at every 30 seconds when the vessel is moving. It is ideal for ocean sailors requiring the best possible performance and future proof satellite tracking applications, fast power boats and smaller non-mandated commercial vessels. Please click here if you want to learn more about Class B+.
|
1091.95 |
|
|
Nomad 2 Portable AIS with GV30
Nomad 2 is a portable AIS transponder from Digital Yacht. Designed for recreational boaters and professional mariners, it offers a full-function Class B AIS transponder with a wireless and USB interface built in for tablets and PCs—all in a portable, compact package.
It incorporates an innovative USB power solution, therefore allowing the Nomad to be powered from any standard USB source. This can include low-cost 3rd-party battery packs, a USB PC connection, or 12V USB adaptors/cigarette lighter adaptors. It ships with a compact combination of AIS and GPS antenna, which allows the main unit to be used below decks on all types of vessels – leisure, and commercial.
It addresses the needs of so many boaters who want a portable yet sophisticated navigation solution with AIS and GPS and the ability to interface with tablets, PCs, and smartphones. It appeals to charter skippers, professional mariners like delivery skippers and pilots, as well as boat owners who don’t want the hassle or cost of installing a dedicated transponder and like the concept of easy iPad and tablet navigation using their favorite charting apps with a detailed AIS overlay and real-time GPS positioning. As a full-function Class B transponder, it also sends the boat position to other AIS users.
Nomad 2 has a built-in wireless interface for outputting GPS position data and AIS. It’s designed for use with an iPad, tablet, phone, or PC in conjunction with any compatible charting app or program—Navionics, NavLINK, Weather 4D, AquaMap, Imray, SailGrib, and 100’s more.
The unit can also act as an AIS/GPS receiver only if MMSI and specific boat data are not available.
Configuration
Nomad 2 has a built-in web interface. The configuration of the transponder can be done through a computer, a tablet, or even a smartphone, and most importantly, no software is required.
You can configure the Nomad 2 through its simple web interface. Just open the web browser, enter the Nomad 2’s IP address, and users can configure the vessel details (MMSI number, boat name, etc.), network name, and password, and even merge the AIS’s WiFi to an existing WiFi network on board. So no complicated programming software or app is required.
You can even view the received NMEA data in the web browser for easy fault-finding. Finally, Nomad 2 supports TCP and UDP network protocols for maximum compatibility with apps.
Features:
The perfect AIS solution for charter users, rental boats, delivery skippers, pilots, commercial users, etc.
Full-function Class B transponder (send and receive AIS)
Supplied with a combination GPS-VHF antenna that has an industry standard 1” threaded mount – suitable for many 3rd party deck, rail, and pole mounts
Integrated wireless and USB interfaces – compatible with 100s AIS-ready charting apps
USB powered
Easy programming and control through a wireless web interface – no apps required
Silence transmissions via the web interface
Supports up to 7 connected devices
Creates its access point and also can join an existing wireless network if required
Specifications:
Weight: 1200 g
Dimensions: 245 × 165 × 100 mm
What’s inside the Box?
Nomad Class B Transponder
3db Wifi Antenna
Integrated USB (Type A) Power Data Cable
GV30 Combination AIS/GPS Antenna With 5m Cable And Connectors
Instructions
|
797.95 |
|
|
AIT1500 NMEA2000 Class B AIS
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click to download form.
"An easy to install Class B AIS transponder with plug 'n play NMEA 2000 interface. Built in GPS antenna and ideal for use on smaller yachts and boats like RIBs and center consoles."
The AIT1500N2K is a Class B AIS transponder with built in GPS antenna to make installation as easy as possible. The super sensitive design allows below deck mounting on GRP boats such as small yachts, RIBs and center consoles and cuts down on antenna clutter. It connects to your boat's electronics via a plug 'n play NMEA 2000 connection and power is also taken from the NMEA 2000 backbone. Simply connect a VHF antenna (or use our SPL2000 AIS-VHF antenna splitter) and you're equipped with Class B AIS.
Once installed, your AIS compatible plotter will show an overlay of targets and you'll transmit your position every 30 seconds when underway to other AIS users. There's also a USB interface for PC/MAC connectivity which can be used for programming the transponder with your boat details.
The AIT1500N2K features a waterproof and tough enclosure with 4 LED indicators to show the status of the transponder.
Features:
Shares the same latest generation AIS technology as our AIT2000 and AIT3000 units
Plug and Play NMEA2000 interface (takes power from network)
Compatible with all AIS ready chart plotters
Internal GPS antenna for easy installation on fibreglass (GRP) hulled boats
Built-in high performance 50 channel GPS receiver (ideal also as a backup GPS)
USB Interface for simple plug and play connection to a PC or Mac
Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter (SPL2000)
Supplied with programming software for PC/Mac and SmarterTrack Lite for Windows
Easy to install black box solution
NOTE - AIS target range, like VHF range is dependent upon a number of installation factors such as; antenna gain, antenna height and size of ground plane. Ranges in excess of 20 miles should be possible if all of these factors are perfect.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
629.95 |
|
|
iAISTX Class B Wireless Transponder
iAISTX has been designed specifically for the growing number of boaters who use an iPad or Android tablet for their navigation tasks. As a full function Class B transponder, it sends your boat position and identity data to other AIS equipped vessels as well as providing a wireless interface for mobile devices with popular apps to display received data from other AIS equipped vessels.
iAISTX creates a secure, password protected, local Wi-Fi network which allows AIS and GPS data to be sent to popular iOS and Android apps such as Navionics, iSailor, Weather4D, SailGrib, iNavX, TimeZero and more. These apps offer a detailed overlay of local AIS targets all updated in real-time. Depending upon the app, you can click on a target and can see identity as well as collision avoidance data such as CPA (closest point of approach) and TCPA (time to closest point of approach).
AIS transponders require one time programming with the boat’s identity and physical dimensions and this is done through a simple, embedded web interface via the tablet’s browser (Safari, Chrome, etc.). This can also be used to silence the transmission and set up wireless parameters such as passwords. Installation is simple – just connect power (12/24v), mount the supplied external GPS antenna and connect to a separate dedicated VHF antenna or to the boat’s existing VHF antenna using our SPL1500 or SPL2000 AIS-VHF antenna splitters.
If you also want to get AIS data on to your MFD (chart plotter), then we recommend the iAISTX Plus which includes an additional NMEA 2000 interface.
Features:
Class B AIS transponder with WiFi interface for phones, tablets, iPads and PCs
Support for all the latest target types such as ATONs and AIS MOB devices
Latest HF AIS technology for superior performance
UDP and TCP/IP protocols supported for up to 7 connected devices
Password protected, secure wireless connection
Internal wifi antenna will typically footprint a boat up to 60ft in length
Supplied with external GPS antenna and 10m (33ft) cable which can be deck mounted or fitted to standard 1” mount
Compatible with 100s apps. See our reviews at www.digitalyacht.net
LED status indicators for wireless connection, data, status, time out, power and silent mode
Easy embedded web interface for programming
Measures just 20 x 14 x 4.5cm
12/24V operation and ultra-low 2W consumption
|
629.95 |
|
|
iAISTX Plus Class B Wireless & NMEA 2000 Transponder
iAISTX Plus has been designed specifically for the growing number of boaters who use an iPad or Android tablet for their navigation tasks. As a full function Class B transponder, it sends your boat position and identity data to other AIS equipped vessels as well as providing a wireless interface for mobile devices with popular apps to display received data from other AIS equipped vessels.
This PLUS model also has a NMEA 2000 interface (with integral drop cable) so that it can integrate with modern plotters, instruments and multi-function displays to provide AIS functionality.
iAISTX Plus creates a secure, password protected, local Wi-Fi network which allows AIS and GPS data to be sent to popular iOS and Android apps such as Navionics, iSailor, Weather4D, SailGrib, iNavX, TimeZero and more. These apps offer a detailed overlay of local AIS targets all updated in real-time. Depending upon the app, you can click on a target and can see identity as well as collision avoidance data such as CPA (closest point of approach) and TCPA (time to closest point of approach).
AIS transponders require one time programming with the boat’s identity and physical dimensions and this is done through a simple, embedded web interface via the tablet’s browser (Safari, Chrome, etc.). This can also be used to silence the transmission and set up wireless parameters such as passwords. Installation is simple – just connect power (12/24v), mount the supplied external GPS antenna and connect to a separate dedicated VHF antenna or to the boat’s existing VHF antenna using our SPL1500 or SPL2000 AIS-VHF antenna splitters.
Features:
Class B AIS transponder with a wireless interface for phones, tablets, iPads and PCs
NMEA 2000 interface for plotter and multi function display AIS compatability
Support for all the latest target types such as ATONs and AIS MOB devices
Latest HF AIS technology for superior performance
UDP and TCP/IP protocols supported for up to 7 connected devices
Password protected, secure wireless connection
Internal wifi antenna will typically footprint a boat up to 60ft in length
Supplied with external GPS antenna and 10m (33ft) cable which can be deck mounted or fitted to standard 1” mount
Compatible with 100s apps. See our reviews at www.digitalyacht.net
LED status indicators for wireless connection, data, status, time out, power and silent mode
Easy embedded web interface for programming
Measures just 20 x 14 x 4.5cm
12/24V operation and ultra-low 2W consumption
|
713.95 |
|
|
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. **
Click here to download form.
AIT2500 Class B+ 5W SOTDMA AIS with GPS
Digital Yacht have a range of Class B+ AIS transponders. Class B+, a standard, utilizes SOTDMA format transmissions which offer a 5W power output (2.5x more powerful than a regular Class B), a guaranteed time slot for transmission in busy traffic areas and faster update rates depending upon the speed of the vessel. It’s ideal for ocean sailors requiring the best possible performance and future proof satellite tracking applications, fast power boats and smaller non-mandated commercial vessels. It still inter-operates with existing Class B and Class A systems.
The AIT2500 is a full function SOTDMA AIS transponder with NMEA 0183, NMEA 2000 and USB data outputs. It is supplied with a GPS antenna and requires connection to a VHF antenna or suitable VHF-AIS antenna splitter.
The AIT2500 has the option of an AIS SART alarm which is great for use with personal AIS MOB devices.
Specifications:
Class B+ 5W transponder with GPS/GLONASS positioning
Multiple NMEA 0183 in/out and multiplex capability
NMEA 2000 connectivity
USB connectivity for PC/MAC
Remote TX silence switch option
Supplied with GPS antenna
Options include VHF-AIS antenna splitter, wireless interface (WLN10SM) and AIS SART Alarm (AIS Lifeguard)
Note On SOTDMA Technology
Class B+ is a generation of AIS functionality based on SOTDMA (self organised TMDA) messaging rather than the simpler CSTDMA (carrier sense TDMA). It guarantees your AIS transmission will get a time slot, even in areas of very high traffic density. It also specifies a 5W transmission power (compared with 2W for Class B) and a transmission rate that increases as the vessel moves faster. With regular Class B protocol, the transmission rate is fixed at every 30 seconds when the vessel is moving. It is ideal for ocean sailors requiring the best possible performance and future proof satellite tracking applications, fast power boats and smaller non-mandated commercial vessels.
|
839.95 |
|