Power Supply 110AC to 24DC/40A The PWS1000 Series of power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source. Analytic Systems’ power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with automatic recovery. An Output Over voltage Crowbar circuit protects any powered devices from excessive voltage in the event of a failure of the unit. The newly updated single-board PWS1000 is ultra-quiet and features the latest generation of current mode PWM control. Extra features include adjustable output voltage audible and visual indicators for low input voltage, low output voltage, over temperature, overload and output on. Either 110 or 220 VAC input (Field Convertible) is available. The PWS1000 also features a four contact output terminal (two positive and two negative contacts) for easy connection of devices to the supply. Features: Power sensitive electronics without interference Rugged and reliable to ensure years of safe and trouble free operation Adjustable output voltage Extremely rugged and well suited for marine and other demanding environments Ultra-quiet low EMI operation Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature Over-temperature shutdown Current limiting Short circuit protection Output overvoltage crowbar Dry contact output fail relay Remote control option Digital Volt/Ammeter option Custom output voltages available (8V to 55V) 19” Rackmount Available Parallel output diodes available Three year parts and labour warranty

Power Supply 110AC to 12DC/70A The PWS1000 Series of power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source. Analytic Systems’ power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with automatic recovery. An Output Over voltage Crowbar circuit protects any powered devices from excessive voltage in the event of a failure of the unit. The newly updated single-board PWS1000 is ultra-quiet and features the latest generation of current mode PWM control. Extra features include adjustable output voltage audible and visual indicators for low input voltage, low output voltage, over temperature, overload and output on. Either 110 or 220 VAC input (Field Convertible) is available. The PWS1000 also features a four contact output terminal (two positive and two negative contacts) for easy connection of devices to the supply. Features: Power sensitive electronics without interference Rugged and reliable to ensure years of safe and trouble free operation Adjustable output voltage Extremely rugged and well suited for marine and other demanding environments Ultra-quiet low EMI operation Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature Over-temperature shutdown Current limiting Short circuit protection Output overvoltage crowbar Dry contact output fail relay Remote control option Digital Volt/Ammeter option Custom output voltages available (8V to 55V) 19” Rackmount Available Parallel output diodes available Three year parts and labour warranty

RAM Laptop Power Supply Caddy This RAM Power Caddy allows for power supply storage to be contained alongside your laptop. Keep your laptop charged and also run additional peripherals like printers, fax machines, etc. all with your own factory supplied power supply or combinations of most aftermarket AC inverters, DC power supplies and or AC/DC power adapters. Material: High Strength Composite Specifications: Width: 8.1875" Height: 3.0625" External Depth: 1.6875" Internal Depth: 1.4375" Weight: 0.30 lbs. Note: The "U" in the part number reflects product packaged in poly bag.

SEC-1223 Power Supply This high-efficiency UL-60950-1 approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 23 Amps with an AC input of 120 Volts, 60 Hz. These advanced switch-mode DC power supplies were designed specifically for land mobile radio (LMR) applications. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit, and over-voltage protection. The AC-DC switching power supply conforms to FCC Part 15(B), class B digital device. Features: Advanced switch-mode technology Reliable power with minimum weight and size Circuit innovations minimize output voltage ripple and RFI Input voltage can be set at 120VAC or 240VAC (internal jumper) UL listed to both USA & Canadian safety standards Specifications: Input: 100-130 VAC Output: 13.8 VDC Amps: 23 Amps Fuse: 6.3 Amps Weight: 3.5 (lbs)/1.6 (kg) Dimensions: 7.28 x 8.19 x 2.40 (in)/18.5 x 20.8 x 6.1 (cm) Safety: UL, FCC Applications: Two way radio base stations Communications systems Security systems Test equipment Plotters GPS receivers Automotive & Marine displays DC computers 12 Volt lighting systems OEM applications

Power Unit - 42026 G Grants the power supply up to 4 modules with the input combination of up to 2 batteries, 12 and 24V.Required for all Power A Mark II installations. IP protection: IP65 Dim.: 205mm x 110mm (8" x 4.3")

Desktop Switching Power Supply - 120VAC Input, 12V Output, 10 Amp This high efficiency UL-60950-1 approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 10 Amps with an AC input of 120 Volts, 60 Hz (230 Volts, 50 Hz model also available). These advanced switch-mode DC power supplies were designed specifically for use with land mobile radio. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit and over-voltage protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device. Features: Advanced switch-mode technology Reliable power with minimum weight and size Circuit innovations minimize output voltage ripple and RFI Input voltage can be set at 120VAC or 240VAC (internal jumper) UL listed to both USA & Canadian safety standards Specifications: Input: 100-130 VAC Output: 13.8 VDC Amps: 10 Amps Fuse: 3 Amps Weight: 3.4 (lbs) Weight: 1.54 (kg) Dimensions: 8.19 x 7.28 x 2.4 (in) Dimensions: 20.8 x 18.5 x 6.1 (cm) Safety: UL, FCC Warranty: 3 Year Limited Applications: Two way radio base stations Communications systems Security systems Test equipment Plotters GPS receivers Automotive & Marine displays DC computers 12 Volt lighting systems OEM applications WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PSU017 The PSU017 is an external power supply designed to work with the DRS2D and DRS4D Dome Radar Sensors when interfaced with and NavNet TZtouch MFD. Standard Features: Power supply for DRS2D and DRS4D Dome Radar Sensors Includes a pre-connected 3M power cable to connect directly to ship's main 12VDC or 24VDC input voltage and 48VDC DRS output voltage Cast Aluminum Housing Legendary Furuno power supply performance and reliability Dimensions: 9" h x 7.5" w x 3" d Weight with cable: 5lbs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LunaSafe 10W Qi Charge Pad USB Powered - Power Supply Not Included Only 5mm thick, the slimmest wireless charger available. Durable mirror panel and aviation aluminum. Built-in over-charging, over-heating, and short-circuit protection. The LED indicator lets you know the charging status. Supports all Luna-Safe products and even works on enabled wireless charging devices such as your cell phones. Features: Only 5mm Thick LED shows charging status Can charge other wireless devices 5V 2A power supply not included

Dual Qi Charge Pad - USB Powered Only 10mm thick, the slimmest wireless charger available. Built-in over-charging, over-heating and short-circuit protection. The LED indicator lets you know the charging status. Dual 5W pads. Supports all Luna-Safe products and even works on enabled wireless charging devices such as your cell phones. Features: LED shows charging status Can charge other wireless devices 5V 2A power supply not included

1000mA (1 Amp) 12VDC Power Supply 12VDC 1 Amp 1000mA

AC/DC Power Supply for TV Hub AC/DC Power supply for all models of KVH TV Hubs.  Comes with an inline fuse and both a European and U.S. power adapter. *Sold as an Individual

Main Power Supply Cable - 42052H Main power supply of the system One each battery Length: 1M (3.3')

Main Power Supply Cable - 42053K Main power supply of the system One each battery Length: 3M (9.8')

Main Power Supply Cable - 42054M Main power supply of the system One each battery Length: 7M (22.9')

AC Power Supply 20/25A, 12V Out, 85-265V In The PWI320 Intelligent Power Supply delivers a full 300 watts of output power for communications, control or a wide variety of other devices. It is fully Digital Signal Processor controlled and feature Universal Input Voltage from 85 to 265 VAC at 50 or 60 Hz with Active Power Factor Correction for the most efficient use of AC power. The Power Supply is preset to the same voltage as a fully charged battery of the nominal output voltage (ie. 13.6V for a 12V model, etc.). The voltage can be adjusted over a reasonable range using the front panel controls, or the PowerWizard software that is free to download from www.analyticsystems.com. Seven dual color LEDs clearly indicate output current levels as well as indicating faults with the Power Supply. Safety features include Power Supply over temperature shutdown, current limiting, short circuit protection, input under voltage shutdown and output overvoltage protection all with automatic recovery.  PWI320MW model available with MIL connectors, extra input and output filtering and sealed to IP66 Features: Digital Signal Processor controlled Universal worldwide AC input Computer programmable Simple front panel controls Easy connection to loads High Vibration Rugged Duty Dry Contact Output Fail Relay Carrying Handle Canbus / RS232 / Remote Control port Five year parts and labour warranty