|
Heavy Duty Waterproof 2-Speed Wiper Motor - 1.5" Shaft - 12V
High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade.
Features:
Torque of 15 N-m
Two speeds
Accepts up to 24 x 24" arm and blade
Self-parking gear to left or right
Adjustable sweep angle
12V
Improved waterproof rating to IP66
Rigid aluminum housing
Insulated grounding
EMC protected
CE Approved
Additional Features:
Two sweep speeds of 35 or 55 sweeps per minute
The sweep angle can be adjusted from 40 to 110 degrees
High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life
The aluminum construction also provides better stability when mounted
The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats
Guaranteed for 3 years
|
117.40 |
|
|
Heavy Duty Waterproof 2-Speed Wiper Motor - 3.5" Shaft - 12V
High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade.
Features:
Torque of 15 N-m
Two speeds
Accepts up to 24 x 24" arm and blade
Self-parking gear to left or right
Adjustable sweep angle
12V
Improved waterproof rating to IP66
Rigid aluminum housing
Insulated grounding
EMC protected
CE Approved
Additional Features:
Two sweep speeds of 35 or 55 sweeps per minute
The sweep angle can be adjusted from 40 to 110 degrees
High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life
The aluminum construction also provides better stability when mounted
The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats
Guaranteed for 3 years
|
123.41 |
|
|
Heavy Duty Waterproof 2-Speed Wiper Motor - 2.5" Shaft - 12V
High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade.
Features:
Torque of 15 N-m
Two speeds
Accepts up to 24 x 24" arm and blade
Self-parking gear to left or right
Adjustable sweep angle
12V
Improved waterproof rating to IP66
Rigid aluminum housing
Insulated grounding
EMC protected
CE Approved
Additional Features:
Two sweep speeds of 35 or 55 sweeps per minute
The sweep angle can be adjusted from 40 to 110 degrees
High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life
The aluminum construction also provides better stability when mounted
The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats
Guaranteed for 3 years
|
119.02 |
|
|
Heavy Duty 2-Speed Wiper Motor - 1.5" Shaft - 12V
Features:
Black Powder Coated Housing
304 Stainless Steel Mounting Plate & Mounting Hardware
316 Stainless Steel Shaft
Chrome Plated Brass Shaft Housing
Adjustable Sweep 45°, 60°, 80°, & 110°
Adjustable Park Position Right or Left
Will Power up to a 24" Arm & 22" Blade
Guaranteed 3 Years
|
108.61 |
|
|
Heavy Duty 2-Speed Wiper Motor - 3.5" Shaft - 12V
Features:
Black Powder Coated Housing
304 Stainless Steel Mounting Plate & Mounting Hardware
316 Stainless Steel Shaft
Chrome Plated Brass Shaft Housing
Adjustable Sweep 45°, 60°, 80°, & 110°
Adjustable Park Position Right or Left
Will Power up to a 24" Arm & 22" Blade
Guaranteed 3 Years
|
117.70 |
|
|
Heavy Duty 2-Speed Wiper Motor - 2.5" Shaft - 12V
Features:
Black Powder Coated Housing
304 Stainless Steel Mounting Plate & Mounting Hardware
316 Stainless Steel Shaft
Chrome Plated Brass Shaft Housing
Adjustable Sweep 45°, 60°, 80°, & 110°
Adjustable Park Position Right or Left
Will Power up to a 24" Arm & 22" Blade
Guaranteed 3 Years
|
110.66 |
|
|
Heavy Duty Lugs - 2 Gauge Wire - 3/8" & 5/16" Post - Combo Pack
Cable Gauge: 2
Screw Size: 3/8" & 5/16"
ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100% tin plated copper resists corrosion from salt and moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry and corrosion free
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
5.29 |
|
|
Heavy Duty Lugs - 2/0 Gauge Wire - 1/2" Post - 2-Pack
Cable Gauge: 2/0
Screw Size: 1/2"
ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100% tin plated copper resists corrosion from salt and moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry and corrosion free
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
5.26 |
|
|
Heavy Duty Lugs - 2/0 Gauge Wire - 1/2" Post - 10-Pack
Cable Gauge: 2/0
Screw Size: 1/2"
ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100% tin plated copper resists corrosion from salt and moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry and corrosion free
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.83 |
|
|
Waterproof Standard Wiper Motor - 90/100 Degree - 12V
Features:
Motor with an adjustable sweep angle of 90 or 110 degrees
Adjustable left or right self-parking
Standard adjustment 90 degrees - left self-parking
Motor shaft & mounting plate in stainless steel
Black powder lacquered aluminum cover
Arm/Blade combination up to 14"/14"
|
52.48 |
|
|
Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 28ST Winch
The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.
The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.
Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
4382.64 |
|
|
Above Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 28ST Winch
The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.
The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.
Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
4800.04 |
|
|
Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 34ST Winch
The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.
The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.
Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
4382.64 |
|
|
Above Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 34ST Winch
The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.
The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.
Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
4800.04 |
|
|
Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 40ST Winch
The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.
The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.
Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
4382.64 |
|