Single DIN Adapter Mounting Plate The Fusion Single DIN Adapter Mounting Plate is specifically used for Fusion single DIN series units. *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MIL-Plate 2 Single Din Adapter  Millenia's MILPLATE2 lets you mount a gauge-style receiver in an opening designed for a single-DIN (2" tall) marine receiver, and gives you a cutout for a USB input.  Features: Black ABS Plastic Single-DIN adapter for gauge-style receivers Includes cutout for a USB port Outer Dimensions (W x H x D) 10" x 4.69" x 0.25" Cutout Opening (for receiver) - 3" (diameter) x 0.25" (depth) Cutout Opening (for USB port) - 1.31" (diameter) x 0.25" (depth) Screw Hole Spacing (W x H x D) - 9" x 2" x 0.25"  Compatible with: MILPRV16 MILPRV17 MILPRV18 MILPRV19  JBLPRV170 JBLPRV175 JBLPRV275 *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MIL-Plate1 Single Din Adapter Millenia's MILPLATE1 lets you mount a gauge-style receiver in an opening designed for a single-DIN (2" tall) marine receiver. Features: Black ABS Plastic Single-DIN adapter for gauge-style receivers Includes cutout for a USB port Outer Dimensions (W x H x D) 10.06" x 4.69" x 0.25" Cutout Opening (for receiver) (W x H x D) 5.5" x 3.56" x 0.25" Screw Hole Spacing (W x H x D) - 9" x 2" x 0.25"  Compatible with: MILPRV22 INFPRV250  INFPRV350  INFPRV450 *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2" Gauge Power Socket Adapter Mounting Plate   This instrument hole adapter is designed to install standard 1-1/8-in. gauges and meters into 2 in. instrument dash panel holes. The socket adapter is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind. Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Face Plate Outer diameter: 2-3/16 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 2 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.04

4" Gauge Power Socket Adapter Mounting Plate This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.  Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: Black Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06

4" Gauge Power Socket Adapter Mounting Plate - White This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.  Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: White Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06

MR500UAB Single Din Bluetooth MP3/WMA/AM/FM/USB Marine Radio This Boss Audio radio is designed to last even when exposed to harsh marine environments. Features: Single-din fit Bluetooth® hands-free AM/FM receiver Switchable US & EU tuner frequencies Conformal-coated PCB UV-protected front panel Push-to-talk Wireless remote control 50 watts x 4 channels Inputs & Outputs: USB port USB charging (1A)* Compatible with audio output from iPhones, smartphones, and MP3 players Front and rear pre-amp outputs Playback: MP3/WMA Bluetooth® audio streaming stream and control your favorite music apps Dimensions: Unit (L x W x H): 3.94 x 7.4 x 2.28 in. Weight (lbs.): 1.1 Shipping Weight (lbs.): 1.15 GB Dimensions (H x L x W): 8.07 x 4.72 x 3.03 in. GB Weight (lbs.): 1.15 MC Weight (lbs.): 11.5

Mounting Plate for SG200 Display - Fits Smartguage™ Cutout Balmar’s Award Winning, 2nd Generation Battery Monitor Optional Adapter Plate for Fitting the SG200 Color Display into a Smartgauge™ Cutout This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DIN Rail Mounting Kit DIN rail mounting kit for use with USG-2.

Signature Series Flush Mount Kits - 7.7" Speakers  Designed with sleek and minimalistic design aesthetics, the Fusion Signature Series flush mount kits allow you to install Signature Series 3i classic-style speakers with a premium near-flat finish – mounting profile no thicker than 2 mm [0.08”]. The flush mount kit features a non-intrusive mounting system for easy installation. Simply place the kit into the cutout, then place the speaker (sold separately) into the kit, tighten the screws, and the tabs will tighten against the panel, keeping it in place without the need to create any screw holes in your boat. Compatible With: Signature Series 3i 7.7" Classic Speakers  Technical Specifications: Mounting Diameter Clearance - 8.46" (21.5 cm) Mounting Depth Clearance - 4.41" (1.2 cm) In the Box: Two (2) flush mount baskets  Two (2) grilles  Mounting template Documentation *Sold as a Pair

Signature Series Flush Mount Kits - 6.5" Speakers  Designed with sleek and minimalistic design aesthetics, the Fusion Signature Series flush mount kits allow you to install Signature Series 3i classic-style speakers with a premium near-flat finish – mounting profile no thicker than 2 mm [0.08”]. The flush mount kit features a non-intrusive mounting system for easy installation. Simply place the kit into the cutout, then place the speaker (sold separately) into the kit, tighten the screws, and the tabs will tighten against the panel, keeping it in place without the need to create any screw holes in your boat. Compatible With: Signature Series 3i 6.5" Classic Speakers Technical Specifications: Mounting Diameter Clearance - 7.68" (19.5 cm) Mounting Depth Clearance - 4.17" (1.06 cm) In the Box: Two (2) flush mount baskets  Two (2) grilles  Mounting template Documentation *Sold as a Pair

Deck Mount Plate This adaptable 4" x 3" plate works with Cannon dual axis rod holders, pedestal mount tracks and downrigger pedestal mounts. Plates can be mounted in a variety of locations, and a protective mounting boot lets you avoid sharp edges. Includes mounting hardware

Made out of a high-impact composite, these mounting plates make removing your trolling motor and mount quick, fast, and simple. The universal hole-patterns fit most traditional trolling motor mounts and all traditional MotorGuide trolling motor mounts. Fits Gator Flex 360, Gator 20.5, 20.8, 21, 21R mounts and can be modified by adding additional holes to fit our longer 23.5 and 24 mounts. The smaller insert piece is secured to the boat with stainless steel bolts, washers, and nylon lock nuts providing a solid base. The larger outside piece slides into place from the front of the boat and is held in place by a tab on the inner piece with a stainless steel pin running through both pieces at the back of the mount. These mounting plates are ideal for saltwater flats, ski, and fish boats, or anytime the trolling motor needs to be quickly removed. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Made out of a high-impact composite, these mounting plates make removing your trolling motor and mount quick, fast, and simple. The universal hole-patterns fit most traditional trolling motor mounts and all traditional MotorGuide trolling motor mounts. Fits Gator Flex 360, Gator 20.5, 20.8, 21, 21R mounts and can be modified by adding additional holes to fit our longer 23.5 and 24 mounts. The smaller insert piece is secured to the boat with stainless steel bolts, washers, and nylon lock nuts providing a solid base. The larger outside piece slides into place from the front of the boat and is held in place by a tab on the inner piece with a stainless steel pin running through both pieces at the back of the mount. These mounting plates are ideal for saltwater flats, ski, and fish boats, or anytime the trolling motor needs to be quickly removed. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Black In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G