|
March 0125-0057-0100 Rear Housing
Rear Housing & Plug Assembly LC for LC-2CP-MD made of Polypro/Glass
|
27.00 |
|
|
March 0125-0028-0100 Pump Housing
|
17.28 |
|
|
March 0125-0083-0100 Drive Magnet .250" Bore
Fits March Pumps:
809, 815, AC-2CP-MD, BC-2CP-MD, LC-2CP-MD
Cruisair PML250, PML250C
Note: This will not fit 809 BR 24vdc With Non-replaceable brushes
|
43.20 |
|
|
March 0125-0113-0100 Large Base
Fits LC-2CP-MD, LC-3CP-MD March Pump models
Kit includes base plate and four Rubber isolation grommets made from Polypro/Glass (Black)
Does not include mounting screws
Use existing base screws to attach to the pump
|
25.92 |
|
|
March 0125-0029-0100 Impeller Mag Assembly
|
18.36 |
|
|
March 0125-0055-0100 Impeller Mag Assembly
Impeller (Molded) 1.812 Dia for 2C-MD, AC-2CP-MD, LC-2CP-MD made of Polypro/Teflon/Glass
|
23.76 |
|
|
March 0135-0171-1000 Rear Pump Housing
Housing Rear 3/8"FPT Outlet you must use a Ceramic Spindle for March Pumps MDXT and MDXT-3
|
15.12 |
|
|
March 0130-0018-1000 Pump Housing Rear
Housing (Rear) 1/2"MPT Outlet for AC-3C-MD, 3CP-MD made of Polypro/ Glass Natural
|
15.12 |
|
|
March Wet End Part# 0153-0057-0100
March Pump Wet End Assembly Includes All Parts except Motor, Bracket and Drive Magnet
0153-0057-0100 WET END KIT 1PK TE-6K-MD
|
661.00 |
|
|
March 0125-0142-0100 Marine Pump LC-2M-MD
March Pump’s industrial LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2M-MD pump may be used submerged or not submerged. The pump is Ignition Protected per SAE J1171 and ISO 8846. It is capable of 12,000 BTU a hour.
Max Flow: 18.5 LPM
Max Head: 2.7 M
Power: 0.014 KW
Electrical/Air: 230V 50/60Hz
230V Motor
6 Foot Cord, Submersible
60Hz: 1Ph 0.025HP/0.019kW, 0.53 AMPS, 3450RPM
50Hz: 1Ph 0.18HP/0.014kW, 0.72 AMPS, 2850RPM
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/4"MPT
Submersible: Yes
Wet End: Polypropylene (Front Housing, Impeller), Nylon (Rear Housing) Viton (O-Ring), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord
Max Internal Pressure: 25 PSI / 1.7 bar
Max Internal Temperature: 130 °F / 54 °C
Ignition Protected per SAE J1171 and ISO 8846: Rated IP67
|
321.75 |
|
|
March 0125-0141-0100 Marine Pump LC-2M-MD
March Pump’s industrial LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2M-MD pump may be used submerged or not submerged. The pump is Ignition Protected per SAE J1171 and ISO 8846. It is capable of 12,000 BTU a hour.
Max Flow: 5 GPM
Max Head: 13 FT
Power: 0.02 HP
Electrical/Air: 115V 50/60Hz
115V Motor
6 Foot Cord, Submersible
60Hz: 1Ph 0.2HP/0.015kW, 0.92 AMPS, 3450RPM
50Hz: 1Ph 0.18HP/0.014kW, 1.1 AMPS, 2850RPM
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/4"MPT
Submersible: Yes
Wet End: Polypropylene (Front Housing, Impeller), Nylon (Rear Housing) Viton (O-Ring), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord
Max Internal Pressure: 25 PSI / 1.7 bar
Max Internal Temperature: 130 °F / 54 °C
Ignition Protected per SAE J1171 and ISO 8846: Rated IP67
|
294.84 |
|
|
March 0115-0057-1000 Housing 1/4"MPT
Housing (Rear) 1/4"MPT Outlet for 1MD and made from Polypro/Glass Natural
|
10.80 |
|
|
March AC-2CP-MD Mag Drive
March Pump's industrial AC-2CP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 5 gallons per minute at 2 feet, and its maximum head is 13 Feet (or around 5.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ceramic, and Ceramic Magnet. The inlet connection is 0.375 female pipe thread and 0.75 male pipe thread, and the outlet is 0.25 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.025 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-2CP-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz
Max Flow 5 GPM 18.5 LPM
Max Head 13 FT 2.7 M
Power .025 HP .018 KW
Electrical 115V 60HZ
Type Centrifugal Mag Drive
Inlet 3/8"FPT & 3/4"MPT
Outlet 1/4"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ceramic Magnet
March 0125-0069-0100
|
271.05 |
|
|
March 0155-0067-0100 Rear Housing w/Thrust Washer
Rear Housing with Thrust Washer made of Ryton for March Pump TE-7R-MD
|
67.60 |
|
|
March 0130-0019-0100 Pump Housing
Housing (Rear) & Plug Assy LC for LC-3CP-MD made of Polypro/Glass
|
28.08 |
|