Myers Pumps 19102A002 Screw Cap Hex 7/16"

Myers Pumps 25208A015 Parts Kit for Model QD Pumps Myers 25208A015 Parts Kit for 3/4HP & 1HP QD Pumps. Contains Shaft Seal, Impeller, Diffuser, Gasket, O-Ring, Venturi and Nozzle for Shallow or Deep Well Pumps.

Myers Pumps SRM4T 20 Sewage Pump 4/10Hp 115V 20' The SRM4T 20 is made of cast iron and has an oil-filled motor for heat dissipation and continuous bearing lubrication. It is suitable for domestic wastewater septic pumping, large sumps, and residential septic tank sewage.

Myers Pumps 05014A167 Gasket Rubber Gasket, 8-3/4" OD

Myers Pumps 21181A017 Shaft Seal 3/4 for B/CA/CE

Myers Pumps MDC33V20 Sump Pump 0.33HP 115V 20' Cord Automatic Myers MDC Series Sump Pump Typical Applications Basement Sumps Dewatering Water Transfer Light Septic Tank Effluent 

Myers Pumps 25886A500 Venturi Plastic 1/2 Hole Myers 25886A500 Venturi for use with Model HJ50S, Series HJ, HR

Myers Pumps 05014A166 Gasket Rubber Gasket, 2-1/8" OD

Myers Pumps ME40P-1 Effluent Pump 4/10Hp 115V Myers ME40P-1 Cast Iron Effluent Pump Specifications VOLTAGE: 1ø, 115V, 60 Hz HORSEPOWER: 0.4 HP AMP DRAW (full load): 12.0 MOTOR TYPE: Permanent Split Capacitor (PSC) RPM: 1650 MAXIMUM HEAD: 32' MAXIMUM CAPACITY: 80 GPM SWITCH TYPE: Tethered Automatic MINIMUM SUMP DIAMETER: Simplex 24" Duplex 36" DISCHARGE PIPE SIZE: 1-1/2" FNPT MAXIMUM SOLIDS HANDLING SIZE: 3/4" Spherical Solids IMPELLER TYPE: Cast Iron, Two-Vane Enclosed CORD LENGTH: 10' CORD SIZE: 16-3; Type: SJTW BODY CONSTRUCTION: Cast Iron MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)

Myers Pumps 16622B010 Impeller Complete 1/2Hp Plastic Impeller for use with Model 1/2 HP, Series QD, HJ

Myers Pumps MS33PV1 Sump Pump 1/3Hp 115V 8'Cd Myers MS33PV10, MS Series, Sump Pump with Vertical Float Switch, 1/3 HP, 115 Volts, 1 Phase, 1-1/2 NPT Discharge, 52 GPM Max, 24 ft Max Head, Automatic, 10 ft Cord   Features 3/16" solid handling Maintenance-free operation Vertical float switch for sump pits with 10" diameter or larger Dual ball-bearing motor and additional lip seal for durability and longer pump life Durable PSC motor for years of service Oil-filled motor for maximum heat dissipation and continuous bearing lubrication Thermal overload protection with automatic reset Zinc motor housing Thermoplastic volute case CSA listed Lead Time:  Average 7-10 Days, Factory Back Order.

Little Giant Submersible Pump 501086 Little Giant 1-T Submersible Pump Motor 115 Volt 60 Hz 1/150 HP Permanently Lubricated Oil Filled Motor, 205 GPH at 1 Foot Head, Shutoff Head 7.4 Feet, Inlet: Snap Off Screen, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Epoxy Coated Aluminum Housing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 10 Foot Power Cord   501086 For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild chemicals such as soap solutions, acids, plating solutions and fertilizers

Little Giant Submersible Pump 501020 Little Giant 1-YS Submersible Pump Motor 115 Volt 60 Hz 1/150 HP Permanently Lubricated Oil Filled Motor, 205 GPH at 1 Foot Head, Shutoff Head 7.4 Feet, Inlet: Screened, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Aluminum Housing, Viton Seal, Fluid Temperature Up to 120F (49C), UR/C-CSA Listed, 6 Foot Power Cord- No Plug   501020 Submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. For pumping unheated metal parts cleaning solvent that is UL classified as PJQU. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F.

Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump 80gpm, 1-1/4" Outlet 3/4HP 3PH

Little Giant Submersible Pump 500286 Little Giant 1-AT Submersible Pump Motor 115 Volt 60Hz 1/200 HP Permanently Lubricated Oil Filled Motor, 170 GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Snap Off Screen, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Epoxy Coated Aluminum Housing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 10 Foot Power Cord   500286 For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.   This pump is not recommended for aquariums, swimming pools and fuel oil transfer.