|
Myers Pumps 19197D000 Case Ejecto Sw 3/4 & 1Hp
Myers 19197D000 Case for use with Model HJ75S, HJ100S, Series HJ
|
597.63 |
|
|
Myers Pumps 18622D101W Case Ejecto Sw 1/3 & 1/2Hp
Case for use with Model HJ50S, Series HJ
This replaces Myer 18622D001
|
382.20 |
|
|
Myers Pumps 20604D000 Case for Self Priming Pump
Case Only
|
228.41 |
|
|
Myers Pumps 14448D001 Case Ejecto CI SW & DW
Cast Iron Casing
|
711.38 |
|
|
Myers Pumps 18623D101W Case Ejecto Dw 1/3 & 1/2Hp
Pump Casing, Deep Well 1/3HP and 1/2HP, HJ
Use with Model HJ50D, Series HJ
|
348.53 |
|
|
Myers Pumps 19199A001 Venturi Ejecto Lexan
Myers 19199A001 Venturi for use with 1HP Model HJ100S
|
51.03 |
|
|
Myers Pumps MS33PV1 Sump Pump 1/3Hp 115V 8'Cd
Myers MS33PV10, MS Series, Sump Pump with Vertical Float Switch, 1/3 HP, 115 Volts, 1 Phase, 1-1/2 NPT Discharge, 52 GPM Max, 24 ft Max Head, Automatic, 10 ft Cord
Features
3/16" solid handling
Maintenance-free operation
Vertical float switch for sump pits with 10" diameter or larger
Dual ball-bearing motor and additional lip seal for durability and longer pump life
Durable PSC motor for years of service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Thermal overload protection with automatic reset
Zinc motor housing
Thermoplastic volute case
CSA listed
Lead Time: Average 7-10 Days, Factory Back Order.
|
293.22 |
|
|
Myers Pumps ME50S-11 Effluent Pump 1/2Hp 115V
Myers ME50S-11, Effluent Pump, 1/2 HP, 115 Volts, Manual, 1 Phase, 20 ft Cord, Cast Iron, 2 Inch Discharge
Features
Two-vane cast iron impeller design provides maximum dosing efficiency
Enclosed design for high-efficiency pumping
Eliminates possibility of jamming between impeller and volute
Passes full 3/4" solids
Durable motor will deliver many years of reliable service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage
Motors have a winding current and temperature-sensitive overload (single phase only)
Volute seal ring is replaceable; restores pump to original performance if wear should occur
Motor is held in place by 4 screws; easily removed if service if ever needed
|
1771.38 |
|
|
Myers Pumps 20560D000K Diffuser
Myers 20560D000K Plastic diffuser for use with 1-1/2 HP and 2 HP Myers QP pump models:
QP15
QP15-3
QP15-03
QP20
QP20-3
QP20-03
|
111.02 |
|
|
Myers Pumps 25208A015 Parts Kit for Model QD Pumps
Myers 25208A015 Parts Kit for 3/4HP & 1HP QD Pumps.
Contains Shaft Seal, Impeller, Diffuser, Gasket, O-Ring, Venturi and Nozzle for Shallow or Deep Well Pumps.
|
291.20 |
|
|
Myers Pumps MW200-23 2Hp 230V 3Ph 60Hz
Myers MW200-23, MW Series, Sewage Pump, 2 HP, 230 Volts, 3 Phase, 2" NPT Vertical Discharge, 162 GPM Max, 70 ft Max Head, 20 ft Cord, Manual
Myers MW200-23 Series Specifications
VOLTAGE: 3ø, 230V, 60Hz
HORSEPOWER: 2.0 HP
AMP DRAW (full load): 7.7
MOTOR TYPE: Permanent Split Capacitor (PSC)
RPM: 3450
MAXIMUM HEAD: up to 70'
MAXIMUM CAPACITY: up to 165 GPM
MINIMUM SUMP DIAMETER: Simplex: 24” Duplex: 36”
SWITCH TYPE: Manual
DISCHARGE PIPE SIZE: 2.0" NPT
MAXIMUM SOLIDS HANDLING SIZE: 2.0"
IMPELLER TYPE: Ductile Iron, Enclosed
CORD LENGTH: 20'
BODY CONSTRUCTION: Cast Iron
MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)
|
2603.54 |
|
|
Myers Pumps 2C200 Pump & Motor Assembly
Myers Pumps 2C200 Two Stage Centrifugal Pumps, 2 HP, 115/230 Volts, 1 Phase Motor Enclosure Type: ODP - Open Drip Proof.
Model Number 26681D009
|
2982.53 |
|
|
Myers Pumps 5014A166 Gasket
For Myers Pump Models:
QP10
QP10-3
QP15
QP15-3
QP20
QP20-3
QP30
QP30-3
|
11.34 |
|
|
Myers Pumps 20601B003 Impeller
Myers 20601B003 is a 1.5 horsepower, 5 vane Replacement Pump Impeller for the QP15 pump.
For use with the QP15 model.
|
69.16 |
|
|
Myers Pumps 25208A001 Parts Kit
Myers 25208A001 PK50 Parts Kit for 1/2 HP. For Models: HT, HR, HJ and QD Jet Pumps.
Parts kit contains: Shaft seal, impeller, diffuser, gasket, O-ring, venturi and nozzle necessary to overhaul either shallow or deep well jet pumps.
|
242.97 |
|