|
Myers Pumps 25208A015 Parts Kit for Model QD Pumps
Myers 25208A015 Parts Kit for 3/4HP & 1HP QD Pumps.
Contains Shaft Seal, Impeller, Diffuser, Gasket, O-Ring, Venturi and Nozzle for Shallow or Deep Well Pumps.
|
291.20 |
|
|
Myers Pumps 05014A167 Gasket
Rubber Gasket, 8-3/4" OD
|
11.34 |
|
|
Myers Pumps 21181A017 Shaft Seal 3/4 for B/CA/CE
|
34.97 |
|
|
CAL PUMPS
A/C Circulation Pump - Air Conditioning & Cooling - Air Conditioning - Seawater Circulation Pump - Magnetic Drive Small Pond Pump
CAL customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why. Four different models are offered at CLR Marine with flow rates from 320 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a one-year warranty and will provide trouble free use in fresh or salt water. You can even use it in hot water up to 110°F!
6' power cords are standard.
Features & Benefits of the CAL PUMPS:
One year warranty
UL Listed for consumer confidence
Premium stainless steel and bronze construction for longevity
Six or twenty foot power cord for convenience
Suitable for fresh or salt water applications
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air
Corrosion resistant
115 or 220 volt motors
Thermally protected
Optional Mounting Bracket Available (model MSUB OR MSUBM)
Do Not Run Dry
Operate horizontal or volute down
MS320 have ½” MNPT intake and ¼” MNPT discharge
MS580, 900, 1200 have ¾” MNPT intake and ½” MNPT discharge
Cal 1200 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS1200
Cal 900 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS900
Cal 580 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS580
Cal 320 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS320
See all Cal Pump Products
S T A I N L E S S S T E E L & B R O N Z E P U M P S
Model
AMPS
(MIN/MAX)
WATTS
(MIN/MAX)
MAX
FLOW
MAX
HT.
1'
3'
5'
7'
9'
11'
13'
15'
17'
MS320
1.05-1.30
68-89
375
12.7'
360
335
305
262
215
-
-
-
-
MS580
2.15-2.55
138-203
860
14'
830
750
675
580
475
345
125
-
-
MS900
2.17-2.76
156-234
885
16'
855
790
725
650
560
460
350
175
-
MS1200
2.97-3.79
208-312
1100
18'
1070
1000
925
850
760
675
560
425
225
Cal Pumps at CLR Marine
|
|
|
Myers Pumps SRM4T 20 Sewage Pump 4/10Hp 115V 20'
The SRM4T 20 is made of cast iron and has an oil-filled motor for heat dissipation and continuous bearing lubrication. It is suitable for domestic wastewater septic pumping, large sumps, and residential septic tank sewage.
|
721.50 |
|
|
Myers Pumps 19196B014 Impeller Plastic
Myers 19196B014 Plastic Impeller for use with 3/4, 1 HP, Series QD
|
58.24 |
|
|
Myers Pumps 14379B001 Diffuser Plastic
Myers 14379B001 Diffuser for use with 3/4, 1 HP, Series QD
|
62.79 |
|
|
Myers Pumps 18622D101W Case Ejecto Sw 1/3 & 1/2Hp
Case for use with Model HJ50S, Series HJ
This replaces Myer 18622D001
|
382.20 |
|
|
Myers Pumps ME40P-1 Effluent Pump 4/10Hp 115V
Myers ME40P-1 Cast Iron Effluent Pump Specifications
VOLTAGE: 1ø, 115V, 60 Hz
HORSEPOWER: 0.4 HP
AMP DRAW (full load): 12.0
MOTOR TYPE: Permanent Split Capacitor (PSC)
RPM: 1650
MAXIMUM HEAD: 32'
MAXIMUM CAPACITY: 80 GPM
SWITCH TYPE: Tethered Automatic
MINIMUM SUMP DIAMETER: Simplex 24" Duplex 36"
DISCHARGE PIPE SIZE: 1-1/2" FNPT
MAXIMUM SOLIDS HANDLING SIZE: 3/4" Spherical Solids
IMPELLER TYPE: Cast Iron, Two-Vane Enclosed
CORD LENGTH: 10'
CORD SIZE: 16-3; Type: SJTW
BODY CONSTRUCTION: Cast Iron
MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)
|
673.56 |
|
|
Myers Pumps HJ75D Jet Pump & Motor Assembly
115v/230v Double Ball Bearing Motor w/ Voltage Selector Switch
SUCTION SIZE:1-1/4" NPT
DRIVE SIZE:1" NPT
DISCHARGE SIZE:1" NPT
VOLTAGE:230v / 115v AC, 60 Hz
|
1357.98 |
|
|
Myers Pumps 18623D101W Case Ejecto Dw 1/3 & 1/2Hp
Pump Casing, Deep Well 1/3HP and 1/2HP, HJ
Use with Model HJ50D, Series HJ
|
348.53 |
|
|
Gianneschi CP26-A2-24V Pump 24V 01Acp2601A2
Main pump features:
Best performance/price ratio
Compact size with high performance
Fast self-priming
Side channel and liquid ring construction
Applications:
Ballast
Bilge
Diesel oil
Fresh Water
Sea Water Circulation
Fire-fighting
Grey water
Sea Water feeding
Port Size: From 3/4'' to 1'' 1/2 BSP
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
1852.26 |
|
|
Little Giant Pump 582614
Little Giant TE-4-MD-HC 230V Magnetic Drive Pump
Motor 230 Volt 50/60 Hz 1/10 HP Totally Enclosed Fan Cooled Motor, 850 GPH at 1 Foot Head, Shutoff Head 24.3 Feet, Inlet: 1" FNPT, Outlet: 1/2" MNPT, Ryton Body, Fluid Temperature Up to 200F (93C), UR/C-CSA Listed, 6 Foot Power Cord- No Plug
582614 Magnetically driven pumps for circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions that are compatible with the pump's material of construction. The MD-HC Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use.
|
730.80 |
|
|
Little Giant 3-MD-SC Magnetic Drive Pump 581503
Little Giant 3-MD-SC Magnetic Drive Pump. This Pump will handle up to a 48,000 BTU Air Conditioner
Motor 115 Volt 50/60 Hz 1/12 HP Open Fan Cooled Motor, 750 GPH at 1 Foot Head, Shutoff Head 21.9 Feet, Inlet: 3/4" FNPT, Outlet: 1/2" MNPT, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 6 Foot Power Cord
581503 Magnetically driven pump for Circulation of moderately corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other moderately corrosive chemicals and solutions that are compatible with the pump's material of construction
|
445.38 |
|
|
Bilge Pump - 800/1100 GPH - Automatic
The TRAC 69311 Automatic Bilge Pump is a submersible 600 GPH pump. This automatic, self-priming bilge pump is ideal for all watercraft. It is ignition protected, has a low power draw and can run dry without damage. Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.
This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.
Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami.
Features:
Cartridge style pump head
Pump body accepts both 3/4” and 1-1/8” screw-on outlets. Each outlet has an O-ring for easy maneuverability without stripping
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Automatic
Flow Rate (3/4" outlet) - 800 GPH
Flow Rate (1-1/8" outlet) - 1100 GPH
Discharge Outlet - 3/4" and 1-1/8"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.05 |
|