|
Myers Pumps 05014A193 Rubber Gasket
Myers 05014A193 is a Gasket Rubber .797 X 1/4
|
12.29 |
|
|
Myers Pumps MS33PV1 Sump Pump 1/3Hp 115V 8'Cd
Myers MS33PV10, MS Series, Sump Pump with Vertical Float Switch, 1/3 HP, 115 Volts, 1 Phase, 1-1/2 NPT Discharge, 52 GPM Max, 24 ft Max Head, Automatic, 10 ft Cord
Features
3/16" solid handling
Maintenance-free operation
Vertical float switch for sump pits with 10" diameter or larger
Dual ball-bearing motor and additional lip seal for durability and longer pump life
Durable PSC motor for years of service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Thermal overload protection with automatic reset
Zinc motor housing
Thermoplastic volute case
CSA listed
Lead Time: Average 7-10 Days, Factory Back Order.
|
293.22 |
|
|
Myers Pumps MDC33V20 Sump Pump 0.33HP 115V 20' Cord Automatic
Myers MDC Series Sump Pump Typical Applications
Basement Sumps
Dewatering
Water Transfer
Light Septic Tank Effluent
|
420.81 |
|
|
Myers Pumps CT25FAB Centrifugal Pump Field Assy Kit
Myers Centrifugal Pump End Only is Cast Iron, Field Assembly Kit, for 2-1/2HP Motor, 2" Suction x 1-1/2" Discharge Ports, 96GPM at 20' Head, 140' Head Max, Brass Impeller 6-1/16" Diameter
|
918.96 |
|
|
Myers Pumps QP7KIT Pump End Assembly
20590D106 KIT PUMP END FOR QP7 PUMP
|
1086.96 |
|
|
Myers Pumps 05059A318 Deflector Rubber
Myers 05059A318 Slinger, for Units with Separate Slinger.
For use with Models: HJ50S, HJ75S, HJ100S, HJ50D, HJ75D, HJ100D, HC-33, HC-50, HC-75, HC-100, Series HJ, HC & QP
|
16.07 |
|
|
Myers Pumps 05014A124 Ring Pipe Rubber
Myers 05014A124, Pipe Ring, Rubber, for 1-1/4" Pipe, for use with Model HC-33, HC-50, HC-75, HC-100, Series HC
|
16.65 |
|
|
Myers Pumps 05014A181 Gasket Rubber Tetraseal
Tetraseal Gasket, 7x6-3/4x1/8, for use with Model MWH50D, MW100D, MW150D, MW200D, Series WHRH, MW, WHR
|
13.23 |
|
|
Myers Pumps 05014A157
Rubber Gasket 6X5 3/4 X 1/8
|
14.45 |
|
|
Myers Pumps ME50S-11 Effluent Pump 1/2Hp 115V
Myers ME50S-11, Effluent Pump, 1/2 HP, 115 Volts, Manual, 1 Phase, 20 ft Cord, Cast Iron, 2 Inch Discharge
Features
Two-vane cast iron impeller design provides maximum dosing efficiency
Enclosed design for high-efficiency pumping
Eliminates possibility of jamming between impeller and volute
Passes full 3/4" solids
Durable motor will deliver many years of reliable service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage
Motors have a winding current and temperature-sensitive overload (single phase only)
Volute seal ring is replaceable; restores pump to original performance if wear should occur
Motor is held in place by 4 screws; easily removed if service if ever needed
|
1771.38 |
|
|
Myers Pumps 05014A166 Gasket
Rubber Gasket, 2-1/8" OD
|
7.56 |
|
|
Myers Pumps 05014A167 Gasket
Rubber Gasket, 8-3/4" OD
|
11.34 |
|
|
Myers Pumps 05014A158 Gasket
RUBBER GASKET 6 3/4 X 6 1/2 X 1/8
|
14.45 |
|
|
Myers Pumps 20560D000K Diffuser
Myers 20560D000K Plastic diffuser for use with 1-1/2 HP and 2 HP Myers QP pump models:
QP15
QP15-3
QP15-03
QP20
QP20-3
QP20-03
|
111.02 |
|
|
Myers Pumps 25208A015 Parts Kit for Model QD Pumps
Myers 25208A015 Parts Kit for 3/4HP & 1HP QD Pumps.
Contains Shaft Seal, Impeller, Diffuser, Gasket, O-Ring, Venturi and Nozzle for Shallow or Deep Well Pumps.
|
291.20 |
|