Myers Pumps 05014A167 Gasket Rubber Gasket, 8-3/4" OD

Myers Pumps 25208A015 Parts Kit for Model QD Pumps Myers 25208A015 Parts Kit for 3/4HP & 1HP QD Pumps. Contains Shaft Seal, Impeller, Diffuser, Gasket, O-Ring, Venturi and Nozzle for Shallow or Deep Well Pumps.

Myers Pumps 21181A017 Shaft Seal 3/4 for B/CA/CE

Myers Pumps HJ75D Jet Pump & Motor Assembly 115v/230v Double Ball Bearing Motor w/ Voltage Selector Switch SUCTION SIZE:1-1/4" NPT DRIVE SIZE:1" NPT DISCHARGE SIZE:1" NPT VOLTAGE:230v / 115v AC, 60 Hz  

Myers Pumps SRM4T 20 Sewage Pump 4/10Hp 115V 20' The SRM4T 20 is made of cast iron and has an oil-filled motor for heat dissipation and continuous bearing lubrication. It is suitable for domestic wastewater septic pumping, large sumps, and residential septic tank sewage.

Myers Pumps 05014A193 Rubber Gasket Myers 05014A193 is a Gasket Rubber .797 X 1/4

Myers Pumps 19196B014 Impeller Plastic Myers 19196B014 Plastic Impeller for use with 3/4, 1 HP, Series QD

Myers Pumps 14379B001 Diffuser Plastic Myers 14379B001 Diffuser for use with 3/4, 1 HP, Series QD

Scot Pump SC 131-000-806-4.75 for Scot Pump 57017-2

Myers Pumps 18622D101W Case Ejecto Sw 1/3 & 1/2Hp Case for use with Model HJ50S, Series HJ This replaces Myer 18622D001

Shields Multflex Hose has a clear FDA formula PVC with black vinyl helix. It is abrasion resistant, flexible and resistant to mild chemicals and salt water. Primarily used for bilge pump discharge, potable water tank fill and drains. Uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use ethylene glycol based antifreeze in hose.

For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.

Shields clear polyester reinforced red tracer PVC tubing has a clear, heavy wall FDA formula vinyl with polyester braid reinforcement. Primarily used for pressurized water system supply (hot or cold), wash down pump connections, head intake and drain line for sink, shower and icebox.

Myers Pumps 18623D101W Case Ejecto Dw 1/3 & 1/2Hp Pump Casing, Deep Well 1/3HP and 1/2HP, HJ Use with Model HJ50D, Series HJ

Myers Pumps ME40P-1 Effluent Pump 4/10Hp 115V Myers ME40P-1 Cast Iron Effluent Pump Specifications VOLTAGE: 1ø, 115V, 60 Hz HORSEPOWER: 0.4 HP AMP DRAW (full load): 12.0 MOTOR TYPE: Permanent Split Capacitor (PSC) RPM: 1650 MAXIMUM HEAD: 32' MAXIMUM CAPACITY: 80 GPM SWITCH TYPE: Tethered Automatic MINIMUM SUMP DIAMETER: Simplex 24" Duplex 36" DISCHARGE PIPE SIZE: 1-1/2" FNPT MAXIMUM SOLIDS HANDLING SIZE: 3/4" Spherical Solids IMPELLER TYPE: Cast Iron, Two-Vane Enclosed CORD LENGTH: 10' CORD SIZE: 16-3; Type: SJTW BODY CONSTRUCTION: Cast Iron MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)