|
Pik-All Utility Nozzle
Cleans desks,chairs, filters, upholstery, and furniture. For use with Vac N Go (VM4B500) and Vac N Blo (VM12500)
Catalog P/N MVC-185A
*Sold as an Individual
|
8.21 |
|
|
Airflare Utility Nozzle
Replacement air nozzle.
Catalog P/N MVC-195AB
*Sold as an Individual
|
7.62 |
|
|
Vac N' Blo Hi Performance Hand Vac/Blower
Pound for Pound, the Vac N Blo® is the most Powerful Hand Vac/Blower on the Planet!
Catalog P/N VM12500
Features:
500 Watts of power with a new state of the art fan enclosed motor.
The 500 series produces Sealed Suction Measurement of 60" water lift (A scientific method of measuring vacuum cleaner suction)
The vacuum is designed for DRY PICK UP ONLY
All steel construction with black powder coat finish.
Technical Specifications:
Construction - All-steel baked enamel finish
Vacuum Filter - Bag
Hose Length - 1'
Motor/Voltage - 120 VAC
Power - 500 W
Amps - 12 AMPS
Airflow - 20 CFM/8,000 FPM
Cord - 12'
Plug - Two (2) prong electrical plug
Vacuum Capacity - 1/4 Gallon
Vacuum Air Flow - 70 CFM
Dimensions - 16.5" x 5.25" x 6"
Weight - 3 Pounds
In the Box:
Vacuum
Extension wand
Pik-All Nozzle
Dust brush
Crevice tool
Inflator adapter
Shoulder strap
Disposable paper bag x 6
*Sold as an Individual
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
142.16 |
|
|
20' Coiled Hose & Spray Nozzle Kit
Camco’s 20-Foot Coiled Hose and Spray Nozzle Kit is a complete wash kit that is ideal for marine use, as well as general cleaning, car washing and daily gardening since they are lightweight, easy-to-use and store. The coiled hose features strain relief to help prevent kinking. Included in the kit are an adjustable spray tip nozzle with thumb lever for flow control as well as a quick connect fitting. The quick connect fitting allows the hose to easily attach/detach from the spray tip nozzle as well as allow the nozzle to swivel a full 360-degrees.
Features:
Complete 20-foot coiled hose assembly that is ideal for marine use, as well as general cleaning, car washing and daily gardening
Kit includes: 20-foot coiled hose, nozzle with thumb lever, a spray pattern adjustment dial, swiveling/quick connect fitting and vented storage bag with a carry handle and D-ring
Coiled hose features strain relief to help prevent kinking and self-coils for easy storage
Quick connect fitting allows the hose to easily attach/detach from the spray tip nozzle and swivel 360-degrees
Nozzle has thumb lever flow control and an easily adjustable spray
|
54.88 |
|
|
40' Coiled Hose & Spray Nozzle Kit
Camco’s 40-Foot Coiled Hose and Spray Nozzle Kit is a complete wash kit that is ideal for marine use, as well as general cleaning, car washing and daily gardening since they are lightweight, easy-to-use and store. The coiled hose features strain relief to help prevent kinking. Included in the kit are an adjustable spray tip nozzle with thumb lever for flow control as well as a quick connect fitting. The quick connect fitting allows the hose to easily attach/detach from the spray tip nozzle as well as allow the nozzle to swivel a full 360-degrees.
Features:
Complete 40-foot coiled hose assembly that is ideal for marine use, as well as general cleaning, car washing and daily gardening
Kit includes: 40-foot coiled hose, nozzle with thumb lever, a spray pattern adjustment dial, swiveling/quick connect fitting and vented storage bag with a carry handle and D-ring
Coiled hose features strain relief to help prevent kinking and self-coils for easy storage
Quick connect fitting allows the hose to easily attach/detach from the spray tip nozzle and swivel 360-degrees
Nozzle has thumb lever flow control and an easily adjustable spray
|
57.59 |
|
|
Simer M-40 Portable Flexible Impeller Utility Pump
Simer Portable Flexible Impeller Utility Pump, Mini-Vac, 115Volt, up to 360 GPH, Garden Hose Ports, 6 Foot Power Cord
|
169.26 |
|
|
14 M ID SIDB Y - SOLIX®/APEX® Side Imaging & 2D Splitter Cable
The 14 M ID SIDB Y cable allows for the installation of a separate 2D transducer paired with a Humminbird MEGA Imaging or non-MEGA Imaging transducer and connect both transducers to a single Humminbird control head. This y-cable provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar® 2D transducer to a Humminbird control head that also has a Side or Down Imaging transducer connected at the same time. This cable supports Transducer ID for automatic recognition and easy setup of Airmar® accessory transducers.
Features:
Compatible with: All SOLIX and APEX models
Combines a MEGA Side Imaging transducer (or non-MEGA Imaging) and accessory 2D transducer and allows them to be connected to a single Humminbird control head.
Automatically provides Side Imaging, Down Imaging and temperature from the standard all-in-one transducer and sources 2D sonar and digital depth from the 2D accessory transducer, without the need to switch data sources manually
Includes Transducer ID for Airmar® accessory transducers, which automatically recognizes transducer type for easy installation and setup.
Cable length: 30" (76 cm)
1-Year Limited Warranty
|
51.42 |
|
|
14 M SILR Y - SOLIX®/APEX® Side Imaging Left-Right Splitter Cable
The 14 M ID SILR Y cable allows for two Side Imaging transducers to be connected to into a single sonar input on a Humminbird chartplotter. This y-cable utilizes the two Side Imaging transducer to act as independent port and starboard Side Imaging sonar sources when boat hulls and transducer obstructions require separate transducers for a clear picture on each side of the vessel. This rigging cable provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar® 2D transducer to a Humminbird control head that also has a Side or Down Imaging transducer connected at the same time. This cable supports Transducer ID for automatic recognition and easy setup of Airmar® accessory transducers.
Features:
Compatible with: All SOLIX and APEX models
Combines two Side Imaging transducers together, acting as independent port and starboard Side Imaging sonar sources and can then be connected to a single Humminbird control head.
Includes transducer ID for Airmar® accessory transducers when used in combination with 14 M ID SIDB Y (#720111-1)
Cable length: 30" (76 cm)
1-Year Limited Warranty
|
51.42 |
|
|
Major Rebuild Kit for Sherwood M-71
This kit contains the following items
MS DATA SHEET
1
DATA SHEET
ON 3008400
1
MTG GSKT FOR P17XX PUMPS
SH 10514C
1
LIP SEAL
SH 10515C
1
SCREW & WASHER
SH 10615K
1
IMPELLER KIT
SH 10944
1
CAM BRASS LARGE CHRYSLER
SH 12211
2
BALL BEARING
SH 12710
3
LOCKWASHER
SH 12857
3
SCREW
SH 12859
1
SEAL/SEAT ASSEMBLY
SH 25150
1
WEAR PLATE
SH 4258
2
SNAP RING (SMALL)
SH 4259
2
SNAP RING (LARGE)
SH 4264
1
WASHER
SH 4432
1
KEY
SH 5133
1
SPACER
Kits are put together at time of order
|
345.23 |
|
|
SR-M Angled Flush Mount - Up/Down
This SR-M Angled Flush Mount Kit allows you to angle your SR-M flush mount LED light by 15 percent up or down.
|
54.74 |
|
|
Use to easily remove or install intermediate shift cables in Mercury drives.
|
40.59 |
|
|
Sierra power trim hose for Mercury outboard engines. For all power trim equipped, inline engines except models with power trim pump mounted between the engine clamp brackets.
|
97.09 |
|
|
Contains everything needed to install permanent fuel tank. Includes stainless steel gas deck fill, two 1-1/8" and four 2-1/4" stainless steel hose clamps, chrome plated brass thru hull vent, 12" of 1-1/2" fuel fill hose, 25" of 5/8" vent hose, 5/8" brass hose barb and two mounting strips.
|
124.99 |
|
|
Major Rebuild Kit for Sherwood M-5
This kit contains the following items
GY 211P-2
1
SQ-HD-PLUG 1/8-B
MS DATA SHEET
1
DATA SHEET
SH 10077K
1
IMPELLER KIT
SH 10093
1
KEY-WOODRUFF
SH 10285
1
CAM
SH 10286
1
VELLUMOID 505 FIBRE GASKET
SH 10514C
2
LIP SEAL
SH 10822
1
SCREW 10-24 X 3/8
SH 11519
1
GRAPHITE BUSHING
SH 12863
1
RETAINING RING
SH 344
6
SCREW 10-24 X 3/8 SS MACHN
WB 298485
1
MTG GASKET FOR 202M-15
Kits are put together at time of order
|
257.97 |
|
|
Minor Repair Kit for Sherwood M-5
This kit contains the following items
SH 10077K
1
IMPELLER KIT
SH 10514C
1
LIP SEAL
Kits are put together at time of order
|
71.66 |
|