|
Foam Filter for AirForce Blaster Sidekick Dryer *3-Pack
Package of 3 foam filters. For use with the SK-1 and QD-1
Catalog P/N MVC-49BX
*Sold as an Individual
|
8.21 |
|
|
Foam Filter for Master Blaster® & AirForce® Commander Dryer *3-Pack
Package of 3 foam filters. For use with the ED-500 and AFTD-3
Catalog P/N MB-3CD
*Sold as an Individual
|
8.21 |
|
|
AirForce® Blaster Sidekick Car & Motorcycle Dryer
Dry your car or motorcycle in minutes with warm (30 degrees F above ambient), dry, filtered air generated by this handheld powerhouse. Getting a professional quality, dry finish for your ride has never been easier than it is with the Air Force® Blaster® Sidekick™! It is the perfect way to expel water from side-view mirrors, door jams, body seams, grills, lights, engines, and more. The Sidekick™ dryer does it all!
The all-steel construction of the Air Force® Blaster® Sidekick™ makes it nearly indestructible, yet it only weighs about three pounds. Don’t be fooled though, this lightweight car dryer packs a powerful 1.3 HP motor and single-stage fan that moves 18,000 feet of air per minute. Its portable size means the Sidekick™ delivers powerful drying results without straining your muscles.
The Sidekick™ features a 12-inch heavy-duty power cord, durable neoprene nozzle, and air flare, as well as an EZ Change foam filter.
Best of all, this high-performance car and motorcycle dryer are designed to save you time and get your pristine ride back on the road in no time.
Catalog P/N SK-1
Technical Specifications:
Construction - All-steel w/matte finish
Motor/Voltage - 1.3 HP
Amps - 8.3 AMPS
Airflow - 18,000 FPM
Cord - 12'
Plug - 3 pong with conductor ground
Weight - 3 Pounds
Dimensions - 4.25" x 7.5" x 9.75"
In the Box:
Dryer
EZ change foam filter x one (1)
Heavy Duty Nozzles x 2
Instruction Manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
122.33 |
|
|
Foam Filter for DataVac® Electric Duster *3-Pack
Package of 3 foam filters. For use with the ED-500
Catalog P/N MVC-49ED
*Sold as an Individual
|
8.21 |
|
|
AirForce® Blaster Car & Motorcycle Dryer
The Air Force® Blaster® Car and Motorcycle Dryer is the fastest and safest way to dry any vehicle.
Water can run, but it can’t hide. All steel, yet weighing only eight pounds, the Air Force® Blaster® Car and Motorcycle Dryer offers a durable yet lightweight drying option. This powerful dryer has a 4 Peak HP, two-stage, dual-fan motor. It easily and safely dries cars and motorcycles in minutes.
You’ll find that this high-powered dryer is perfect for getting water out of side-view mirrors, door jams, body seams, grills, lights, and other difficult areas. The Air Force® Blaster® produces warm (up to 30 degrees above ambient), dry, filtered air that will not harm paint or chrome, while providing you with a flawless finish as water evaporates before water spots or streaks can form.
Catalog P/N B3-CD
Technical Specifications:
Construction - All-steel
Motor/Voltage - 4 HP
Amps - 10 AMPS
Airflow - 29,250 FPM
Cord - 12'
Plug - Three (3) pong w/conductor ground
Weight - 8 Pounds
Dimensions - 11.5" x 7" x 7"
In the Box:
Dryer
10' Commercial grade hose
EZ change foam filter
Heavy Duty neoprene blower Nozzle
5 Additional interchangeable attachments
Instruction Manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
299.90 |
|
|
DS-H10-BLK Horizontal Cable Seal- Black *3-Pack
This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.
Features:
Watertight installation - 100% waterproof with an IPX68 rating
Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) - .24" to .39" (6 - 10 mm)
Height - 1.06" (27 mm)
Width - 1.75" (44.5 mm)
Color - Black
Orientation - Horizontal
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as an Three (3) Pack
|
64.32 |
|
|
DS-H6-BLK Horizontal Cable Seal - Black *3-Pack
This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.
Features:
Watertight installation - 100% waterproof with an IPX68 rating
Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during installtion.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) - .08" to .24" (2 - 6 mm)
Height - .79" (20 mm)
Width - 1.12" (28.5 mm)
Color - Black
Orientation - Horizontal
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as a Three (3) Pack
|
46.15 |
|
|
Oval Kite Floats - Multi-Color *3-Pack
These floats are made from high-density foam with nickel-plated brass inserts which are corrosion resistant. The grommet inserts help prevent your fishing line from chafing. All of these features mean less friction and more extended durability.
Tigress multi-colored 3-pack of oval kite floats provides one (1) pink, one (1) green and one (1) orange kite float.
*Sold as a Pack of three (3)
|
4.49 |
|
|
Dometic DVF Vent Filter for Holding Tanks
Dometic goes that extra mile so that you don't have to and reducing the use of chemicals is always our aim, especially in a marine environment. The Dometic DVF vent filter ensures just that and is designed to absorb odors from a holding tank vent and keep the surrounding air clean and pleasant.
The vent filter eliminates the need for any holding tank chemicals since it is manufactured with superbly effective odor-absorbing filter material. Adapters for different vent hose sizes are included in the kit.
Features:
No chemicals needed
Absorbs odors
Environmental awareness
Legacy P/N 309311004 and 309311001
*Sold as an individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
107.57 |
|
|
22-18 AWG Heat Shrink Butt Connector - 3 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #22-18 AWG
Insulation Color: Red
Max Wire Insulation Outer Diameter (inch): 0.19"
Package Size: Three
|
2.50 |
|
|
16-14 AWG Heat Shrink Butt Connector - 3 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #16-14 AWG
Insulation Color: Blue
Max Wire Insulation Outer Diameter (inch): 0.21"
Package Size: Three
|
2.54 |
|
|
12-10 AWG Heat Shrink Butt Connector - 3 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #12-10 AWG
Insulation Color: Yellow
Max Wire Insulation Outer Diameter (inch): 0.28"
Package Size: Three
|
3.17 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/8" x 3" - 3-Pack - Black
Package of 3 Black 3"(7.6cm) long sections with a 1/8"(3.2mm) diameter that shrinks to 1/32"(0.8 mm)
Wire Range: <18 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1.79 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 3/16" x 3" - 3-Pack - Black
Package of 3 Black 3"(7.6cm) long sections with a 3/16"(4.8mm) diameter that shrinks to 1/16"(1.6mm)
Wire Range: 20-12 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2.11 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 3" - 3-Pack - Black
Package of 3 Black 3"(7.6cm) long sections with a 1/4"(6.4mm) diameter that shrinks to 5/64"(2mm)
Wire Range: 16-10 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2.48 |
|