Wall Mount Bracket with 2-Piece Slide Simple wall plate for easy fitting & removal Majestic LA7C is a simple wall bracket designed to work with both 75mm and 100mm Vesa. Simply lift and the TV comes off, and to mount it just slide it on. Accessories Supplied: Bracket with Screws Color: Black Features: Easily removable Features: Can be used in multiple locations with extra LA10M Screen Size (Diagonal): 10" to 22" Majestic Vesa Size: 75mm or 100mm

Tilt & Swivel Lockable LED TV Wall Mount Bracket The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket is a unique bracket with a simple but very versatile design. The team at Majestic worked very closely with various Marine and RV manufacturers and customers to engineer a bracket that can be a simple wall bracket and yet give you the flexibility of some angular movement. The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket does just that is easy to install, and has a lot of flexibility. The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket comes in Black and will fit all Majestic LED TV models 22" or less. It is designed for easy mounting and removal. Simply remove the securing locking screw and slide up to remove or slide down to install. This bracket is designed for both 75mm and 100mm Vesa mounting solutions. The Tilt and Swivel allow for the TV to be installed almost anywhere and with the wide viewing angles, you will always see the perfect picture. Features Distance to wall: 44mm Loading weight: 15kgs Max TV size range: 15-22" Adjustable angle: 15 degrees up/down & left/right

Heavy-Duty Single Swing ARM Lockable LED TV Wall Mount Bracket Majestic has a versatile range of swing arm brackets all specifically designed to handle the Harsh Marine and Tough Outback environment. Engineered in Australia under the some of the toughest outback conditions found anywhere in the world, you can be assured of the higher quality and reliability of the Majestic product. The Majestic ARM102 Heavy Duty Single Swing ARM Lockable LED TV Wall Mount Bracket comes with a locking pin so that you can lock it in place when travelling. The TV Vesa plate on the Majestic ARM102 Heavy Duty Single Swing ARM Lockable LED TV Wall Mount Bracket is designed for Majestic TV's and many other brands supporting both 75mm, 100mm and 200mm Vesa combinations. This bracket is designed to hold larger sized TVs' including the Majestic 32" as well as other branded TVs of 23" or above. Technical Features: Weight: The physical design of the Majestic ARM102 Heavy Duty Single Swing ARM Lockable LED TV Wall Mount Bracket is designed to be able to withstand the harsh Outback and tough Marine environment. It is designed to be able to hold TV weighing upto 30Kg, and is engineered with both 75mm x 75mm, 100mm x 100mm and 200mm x 200mm Vesa mounting holes or any combination of those, it can be used with all larger Majestic TV's  as well as other brands.  Warranty: Majestic products are designed and developed in Australia and exported globally, with over 15 years experience Majestic stands by the quality of our products by providing a 3 year worldwide warranty. Our engineering design team has paid attention to all the important details to ensure that when you purchase a product of this quality and caliber that you can enjoy many years of reliable performance in the toughest conditions where domestic brands will not survive. Note: It is recommended to remove the TV from the Arm during off-road transit. Adjustable angle: 10 degrees up/down Maximum load: 30kgs Suitable for TV sizes: 23" - 42" Distance to wall: 70-230mm Specifications: Color: Black Holds up to 30kg Max TV Size: 42" Vesa Size: 75mm, 100mm, 200mm

Iridium GO!® Wall Mount Bracket Kit The Iridium GO! Wall Mount Bracket Kit provides the ability to install the Iridium GO! in a vehicle or building with easy removal. It includes mounting plate, wall bracket, and screws (2 wood, 2 metal).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

FINISH THOMPSON M100015 WALL MOUNT BRACKET

Wall Mounting Bracket for AirForce® Master Blaster Dryer The perfect way to get the AirForce® Master Blaster Dryer (MB-3CD) off the floor and out of the way. Catalog P/N MVC-331 *Sold as an Individual

Heavy-Duty Transom Mount Bracket w/Spray Shield Mount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to allow the angle of the transducer to be parallel with the water surface. The spray shield blocks excessive water from spraying off the transducer when the boat is running at high speeds.  Creates minimal drag on the boat. Compatible with: 4-Pin, 8-Pin or 12-Pin scanning transducers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Standard Upper Mounting Bracket w/Gland Seal   VANDAR - (3 screw, 1 wire) (2008-Present) Specifications Lenco Part #: 15085-001 (Original Part #116) System Type: Single or Dual Actuator Compatibility: Any Boat WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Mast Mount Bracket for UFO X TV Antenna High quality, stainless steel bracket specifically designed for the UFO X mast mounting. This pole has been designed mainly for the Majestic UFO when mounting on masts to allow the antenna to be easily fitted. Simply install the bracket to the side of the mast and then screw the antenna to the top height near the top of the mast. This will assist in getting the best possible signal.

FishTrax™ Adjustable Mounting Bracket with Suction Cup Utilizing the TraxMount FishTrax™ adjustable mounting bracket with suction cup you can easily mount your FishTrax™ fish finder to any flat surface on your kayak, small boat or canoe.  Combine it with a TraxMount Weighted Display Mount Pad or TraxMount Mounting Disk to maximize usability. Compatible with:  FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C *Sold as an Individual

Mounting Bracket with Knobs for TZT19F Display TZT3 TZT19F bracket with knobs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

March 0150-0125-0200-2.50 Imp Mag Assy Encap W/2.50  

March 0150-0125-0200-2.582 Imp Mag Assy W/2.582 Trim  

Single Swing Arm Bracket w/Locking Pin Majestic has a versatile range of swing arm brackets. The ARM101 can be easily removed from the base plat so you can remove the TV and ARM when travelling in harsh conditions.  You can also purchase an addition base plate if you would like to move the TV & ARM to a different location! Majestic has a versatile range of swing arm brackets. The ARM101 can be easily removed from the base plate so you can remove the TV and ARM when travelling in harsh conditions.  You can also purchase an addition base plate if you would like to move the TV & ARM to a different location! The ARM101 is also compatiable with the Majestic locking pin.  The locking pin is designed to lock your arm bracket against the wall during transit. The ARM101 comes in Black and also has removable covers to allow you feed cable through so that your installation is nice and neat. The Vesa plate is designed for Majestic TV's and many other brands. Note: It is recommended to remove the TV from the wall during off-road transit. Adjustable angle: 10 degrees up/down Maximum load: 15kgs Suitable for TV sizes: 13" - 27" Distance to wall: 70-235mm

The ARM2502 comes with a locking pin designed to lock your TV against the wall during transit. This arm provides the perfect solution to most installations. Excellent for wall mounting, simply lift the locking pin and the arm swings out to 410mm from the wall. With double linkages this arm can bend and turn to fit almost any application. The Vesa bracket plate fits 75mm - 100mm - and 125mm mounting arrangements with lockable grub screws. So, you can have the TV fixed to the bracket or unlock the screws and remove it from the bracket and take the TV with you. The ARM2502 is the perfect choice for multiple application installations. Weight Capacity: 10 kg (22.05 lbs) TV Size: 10" to 22" Mounting: 75mm Vesa, 100mm Vesa, 125mm Vesa all included Extension: 90mm to 410mm with locking pin Dimensions: Against wall: 270mm (10.63")H x 195mm (7.68")W x 80mm (3.15")D Extended: 270mm (10.63")H x 80mm (3.15")W x 410mm (16.14")D