|
30 Amp 125 Volt Power Inlet (White)
301EL-B
Product Features:
Marine grade UV stabilized glass-filled polyester construction
Easy Lock System
Watertight cap
4-way right angle rear safety enclosure
Stainless steel trim
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.72 |
|
|
30A 125V Power Inlet
303SSEL-B
Product Features
Solid cast 316 stainless steel
Locking waterproof cap
Easy Lock System
Soft Touch cap stays open in the upright position
8-way right angle rear safety enclosure
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
81.78 |
|
|
50Amp/125V Inlets
Stainless Steel Power Inlet
Marinco® Power Inlets
Easy Lock™ - Marinco's exclusive Easy Lock™ System has been designed to make hook-up quick and easy. Just connect the cordset (with an Easy Lock™ locking ring installed) to the inlet and turn the locking ring less than a quarter turn. The tabs on the locking ring lock into the inlet for a positive watertight hook-up while eliminating any chance of cross threading. The locking ring features lock locators positioned at 180° to improve finger grip during attachment.
Easy Lock™ inlets have a threaded boss that will accept threaded cordsets as well. The Easy Lock™ system is a standard feature on some Marinco® 30 amp and 50 amp inlets and cordsets.
The covers on all Marinco® inlets are designed to stay hinged open when the cover is lifted up. This allows the boater to connect their shore power cord while the cover remains open and out of the way. A soft touch unlocks it for closing.Blades are nickel plated brass for maximum corrosion resistance.
Interior hardware is marine-grade stainless steel.
Rear Enclosure
Made of flame-resistant UL94V0 plastic
All rear enclosures are glass-filled polyester for strength
Integral strain relief complies with ABYC requirements
Multiple positions allow for maximum installation flexibility
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
148.39 |
|
|
50Amp 125/250V Inlets
Stainless Steel Power Inlet
Marinco® Power Inlets
Easy Lock™ - Marinco's exclusive Easy Lock™ System has been designed to make hook-up quick and easy. Just connect the cordset (with an Easy Lock™ locking ring installed) to the inlet and turn the locking ring less than a quarter turn. The tabs on the locking ring lock into the inlet for a positive watertight hook-up while eliminating any chance of cross threading. The locking ring features lock locators positioned at 180° to improve finger grip during attachment.
Easy Lock™ inlets have a threaded boss that will accept threaded cordsets as well. The Easy Lock™ system is a standard feature on some Marinco® 30 amp and 50 amp inlets and cordsets.
The covers on all Marinco® inlets are designed to stay hinged open when the cover is lifted up. This allows the boater to connect their shore power cord while the cover remains open and out of the way. A soft touch unlocks it for closing.Blades are nickel plated brass for maximum corrosion resistance.
Interior hardware is marine-grade stainless steel.
Rear Enclosure
Made of flame-resistant UL94V0 plastic
All rear enclosures are glass-filled polyester for strength
Integral strain relief complies with ABYC requirements
Multiple positions allow for maximum installation flexibility
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
156.24 |
|
|
50AM/30AF Power Grip Marine 12" Locking Adapter - M-Lock/F-Locking Adapter
The Camco 50-amp male locking adapter to 30-amp female locking adapter is a 12" adapter cord with a threaded locking ring that creates a weatherproof connection. The durable, long-lasting STW cord has a 180 degree turn from male to female end.
Features:
50 AMP locking male end with 30 AMP locking female end
12-inch adapter
Threaded locking ring creates a weatherproof connection
Durable, long-lasting STW cord
180 degree turn from male to female end
|
52.57 |
|
|
APT-250-01-B - Aluminum PowerTower® Radar Mount - 10" Aft Leaning - Black
The Scanstrut Aluminum PowerTower® is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO20, HALO20+, HALO24 radars
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars
Sitex - RADARpc - 4D radar
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
Range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 9.84" (250mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
313.87 |
|
|
Shore Power Straight Adapter, 30A M-15A-F
Ergonomic EEL-style adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet (or equipment) of dissimilar power configuration. They feature a power-on LED to confirm connection and integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
Straight Adapter - Not recommended for useis wet locations
Boat Side: Female Connector - Attaches to boat inlet or cordset
15 or 20A 125v Straight Blade
Dock Side: Male Plug - Attaches to dockside receptacle or cordset
20A 125V Locking
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.28 |
|
|
30A 125V Molded Cordset 25'
Product Features:
All Marinco 30A PowerCord Marine Cordsets are made of the highest quality, marine-grade construction with features you won't find on other power cords:
Various length and color options for your specific needs
Watertight molded plug and connector for safety and durability
Heavy-duty, super flexible 10 gauge, 3 conductor cable
Molded grip ends with Line-Up Ridge for easy blade alignment
All models also include a standard threaded ring for hook-up to ordinary threaded inlets and accept the Marinco Easy Lock™ System Ring
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.34 |
|
|
50Amp 125V/250V Inlets
Stainless Steel Power Inlet w/o Rear Safety Enclosure
Marinco® Power Inlets
Easy Lock™ - Marinco's exclusive Easy Lock™ System has been designed to make hook-up quick and easy. Just connect the cordset (with an Easy Lock™ locking ring installed) to the inlet and turn the locking ring less than a quarter turn. The tabs on the locking ring lock into the inlet for a positive watertight hook-up while eliminating any chance of cross threading. The locking ring features lock locators positioned at 180° to improve finger grip during attachment.
Easy Lock™ inlets have a threaded boss that will accept threaded cordsets as well. The Easy Lock™ system is a standard feature on some Marinco® 30 amp and 50 amp inlets and cordsets.
The covers on all Marinco® inlets are designed to stay hinged open when the cover is lifted up. This allows the boater to connect their shore power cord while the cover remains open and out of the way. A soft touch unlocks it for closing.Blades are nickel plated brass for maximum corrosion resistance.
Interior hardware is marine-grade stainless steel.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
165.68 |
|
|
30A 125V Locking Connector w/103RN Weatherproof Cover
The 305CRCN.VPK 30A 125V locking blade female shore power connector features corrosion resistant contacts and terminals. A weather resistant cover and threaded sealing ring are included for added protection in harsh environments. The receptacle body is made of yellow nylon with a ribbed design for secure grip.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.83 |
|
|
Threaded Ring - 30A - 125V
Threaded sealing for use with 20 and 30A weatherproof boots and sealing collar
|
7.24 |
|
|
EEL "Y" Adapters
These adapters are equipped with sealing collars and are for use in wet locations.
Boat Side
Female Connector: Attaches to boat inlet or cordset
(2)50A-125V Locking w/ Sealing Collar System
Dock Side
Male Plug: Attaches to dockside receptacle or cordset
(1)50A-125/250V Locking
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
502.62 |
|
|
15AM/30AF Power Grip Dogbone - Marine 12" 90M/F-Locking
The Camco 15M/30F AMP Locking Adapter is a 12" adapter cord with a threaded locking ring that creates a weatherproof connection. The durable, long-lasting STW cord has a 180 degree turn from male to female end.
Features:
15 AMP locking standard male end with 30 AMP female end
12-inch adapter
Threaded locking ring creates a weatherproof connection
Durable, long-lasting STW cord
180 degree turn from male to female end
|
51.83 |
|
|
Replacement interior for 303SSEL-B, 303SSI-B, and 301 EL-B power inlets.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.74 |
|
|
Professional Series Battery Charger - 30A - 2-15A-Banks- 12V/24V
The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.
Battery Charging System Designed for Use On Land and in Fresh and Salt Water
The “Green” Charger: Totally “Repairable” Not a Throw-Away
Unmatched Performance, Reliability, Safety and Quality
TROUBLE FREE – Just Plug It In and Forget It!
Join Over 750,000 of Our Satisfied Customers!
Fully Automatic and Totally Waterproof
Features:
Approved for Wet Cell and AGM batteries
Models also available for Gelled Electrolyte batteries
Designed for use in fresh and saltwater
DeltaVolt® Intuitive Charging Technology
Waterproof, dependable, rugged construction
Independent outputs
Fully automatic / multi stage charging
Zero spark technology
Battery maintenance mode
On-board diagnostic codes
Temperature compensated
Advanced microprocessor controlled
Battery systems available: 12V – 48V
LED lights indicate the state of charge
Reverse polarity protected
No installation restrictions
FCC Parts A & B interference compliant
DC charge cables = 5' AC power cord = 3'
Approved and meets ISO 8846 Marine standards
Ignition protected (US Coast Guard 33 CFR 183.410
May be used in many types of sporting applications including:
Inland Watercraft
Salt Water Watercraft
Motorcycles
Golf Carts
Utility Vehicles…
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
389.86 |
|