|
Up/Down Footswitch - Compact, Black
Part #: P104810
Maxwell's compact up and down foot switches are now available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring.
|
41.04 |
|
|
Up/Down Footswitch - Compact, White
Part #: P104809
Maxwell's compact up and down foot switches are available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring.
|
41.04 |
|
|
Up/Down Windlass Control Panel w/Push Button ON/OFF Switch
Easy to use, panel mounted Up/Down switch for remote windlass operation from the helm, flybridge or cockpit.
Suitable for use with dual-direction solenoids
Manufactured from marine grade materials
Splash Proof
Suitable for 12V and 24V applications
Includes on/off switch and power indicator light
|
487.44 |
|
|
SR-M Angled Flush Mount - Up/Down
This SR-M Angled Flush Mount Kit allows you to angle your SR-M flush mount LED light by 15 percent up or down.
|
54.74 |
|
|
REMOTE UP/DOWN CONTROL
Easy to use panel-mounted Up/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available for use with dual-directional solenoids.
Manufactured from marine-grade materials.
Splash proof.
Suitable for use with DC 12V or 24V dual-directional solenoids.
|
64.03 |
|
|
52MM (2-1/16") ViewLine Trim Indicator Gauge Up/Down - Black Dial & Round Bezel
Veratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.
More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use. ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color.
Interchangeable bezel option.
Features:
8 pole Tyco/Hirschmann MQS plug
Red LED Via Plus And Min Warning Light
Operating voltage 8–32 V
Input signal: standard Ω values
Optional make-point switch can be connected
Reverse polarity protection
Anti-fog double lens
Front side protection rating IP67
52 mm installation diameter
50 mm installation depth
In the Box:
Gauge
Connection Cable
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
29.99 |
|
|
Guarded Rocker Switch (Up/Down)
The guarded rocker switch controls the up and down function of all anchor windlass models with a solenoid/contactor or control box.
The switch can be mounted at the helm as the main switch for operation or mounted at a second station as a secondary switch. It features a raised plastic guard surrounding the rocker switch which helps prevent accidental activation of the windlass, enabling safer operation.
Technical Specifications:
Switch Direction - Up/Down
Material - Plastic
Power - 12/24V
Color - Black
*Sold as an Individual
|
79.09 |
|
|
52MM (2-1/16") OceanLink Engine Trim - Up/Down - White Dial & Bezel
OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection. Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.
Interchangeable bezel option.
Features:
AMP Superseal Easylink
270° pointer deflection angle
Reverse polarity protection
Anti-fog double lens
Front & rear protection rating IPX5
Operating temperature range -20 °C / +70 °C
Nominal voltage - 12/24V
Hole diameter - 52MM
In the Box:
Gauge
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
35.99 |
|
|
23.75" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required
Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management.
Compact Design
Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must.
Eliminate Interference
A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation.
Universal
The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.
Modular Top Plate
The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.
*Top Plate Sold Separately
|
1512.00 |
|
|
28" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required
Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management.
Compact Design
Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must.
Eliminate Interference
A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation.
Universal
The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.
Modular Top Plate
The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.
*Top Plate Sold Seperately
|
2078.40 |
|
|
A/M-24 Auto/Manual Adult Universal PFD - Blue/Black
The Onyx A/M-24 Auto/Manual Inflatable Life Jacket is lightweight and low profile, and the perfect option for kayak fishing, fishing, paddling, or boating in warmer weather conditions. So lightweight and comfortable that you won’t know you have it on until you need it.
One of the key features of this Automatic/Manual life jacket is that it inflates automatically upon immersion in water, but it also can be converted to MANUAL ONLY inflation for those times when you want the convenience of kayaking, canoeing, or fly-fishing activities where there is a good chance you may get wet or could end up in the water. If this happens, you just pull the inflation cord so the vest will inflate and keep you safely floating when you are immersed in water.
For persons 16 years of age and older; and over 80 lbs. Not recommended for non-swimmers or weak swimmers. Minimum buoyancy of 22.5 lbs. when inflated.
Inflatable life jackets can be reused after each inflation. Always read your Owner's Manual for the proper way to initially arm your life jacket with the CO2 cartridge, and how to re-arm it after it has been inflated. Use Onyx Rearming Kit #1352 for this product.
Features:
U.S. Coast Guard-approved inflatable life jacket - Automatic/Manual Inflation
Convertible from automatic/manual to manual-only inflation
Low profile design keeps you cool in warm weather
Soft neoprene neckline for all-day comfort
A protective cover is constructed with heavy-duty nylon ripstop and nylon Oxford fabrics
|
88.50 |
|
|
Rupp Single Rigging Kit W/Lok-Ups & Nok-Outs - 160' Black Mono
Complete rigging packages that allow you to run one (1) line on each rigger. This kit includes (2) exclusive Rupp single pulley halyard line locks with shock cords, 160ft of 400lb black mono-filament halyard lines one pair of Rupp NOK-OUT release clips, (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (4) Crimp Sleeves.
|
186.82 |
|
|
Rupp Double Rigging Kit w/Lok-Ups & Nok-Outs - 260' Black Mono
Complete rigging packages that allow you to run two (2) lines on each rigger. This kit includes (2) exclusive Rupp double pulley halyard line locks with shock cords, 260ft of 400lb black mono-filament halyard lines, two pair of Rupp NOK-OUT release clips, (4) Nylon ball stops, (2) Strap Eyes, (8) Snap Swivels, (8) Crimp Sleeves.
|
306.95 |
|
|
Flip-Up Dock Cleat - 6" - Black
Cast from solid marine grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.
|
21.36 |
|
|
Flip-Up Dock Cleat - 8" - Black
Cast from solid marine grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.
|
35.24 |
|