EMERGENCY CRANK HANDLE (RC8, RC10, RC12 SERIES) For use with RC8, RC10, RC12 & Freedom Series anchor winches. Constructed of light weight, durable injection-moulded plastic, these handles float if accidentally dropped overboard.

Seal Kit f/2200 & 3500 Series Windlass Gearboxes Kit includes: (2) 55 x 70 x 8 oil seal (2) 20 x 2 O-ring (1) Sight glass (1) O-ring ID 90mm section dia. 2mm (1) 25 x 47 x 7 oil seal

RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12v Package Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Emergency crank / clutch release handle Features Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations Fully automatic rope / chain windlass is designed to effortlessly retrieve and deploy 1/4" (6mm / 7mm) chain spliced to 1/2" (12 mm) three strand or 8-brait (plait) rope The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series Full disassembly capability of topworks utilising handle provided and an Allen key The RC8 Series is manufactured from marine-grade 316 stainless steel for long term durability The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance In combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm always exerts maximum control pressure The RC8 works just as effectively with all-chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Full disassembly capability of the topworks utilising only the handle provided and an Allen key Manual override using the emergency crank handle provided Sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel All RC Series windlasses are fitted with Maxwell's unique Wave Design™ chainwheel This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode Wave Design™ Chainwheel Is fitted to all RC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and Metric Specifications Material: Marine-Grade 316 Stainless Steel Power: 12 Volt DC, 600 Watts Chain / Short Link: 1/4" ( 6mm / 7mm ) Maximum Pull: 770 lbs ( 350kg ) Rope Size: (Nylon)* (3-Strand or 8 Plait Recommended) 1/2" (12mm) Chain Speed (Anchor Retrieval): 92 Feet per Minute (28 m / min) Rope Speed (Anchor Retrieval): 79 Feet per Minute (24 m / min)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Kit Freedom Key - Washer Maxwell key/washer kit for Maxwell Freedom series windlasses.

Freedom Shaft Service Kit Maxwell shaft service kit for Maxwell Freedom series windlasses.

Seal Kit for Freedom Series 1000 & 1500 Rope/Chain Windlasses Kit includes: (2) 40 x 55 x 8 mm oil seal (1) 90 x 2 mm O-ring (1) Sight glass (1) O-ring 20 x 2 mm (1) 25 x 47 x 7 mm oil seal

Maximum Pull: 1320lbs The larger RC8-8 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope. The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series. Sleek, low profile and MAX-grip capstan drum versions are available to suit individual user preference. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. Full disassembly capability of top works utilizing handle provided, a screw driver and an Allen key. The RC8 Series is manufactured from marine grade 316 stainless steel for long term durability. The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure. The RC8 works just as effectively with all-chain rodes for those who desire a low profile, elegantly styled windlass on their foredeck. Huge through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, free fall anchoring. Manual override using the emergency crank handle provided Sealed oil bath and marine grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel. Kits include: windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle. Anchor Rode Sold Seperately

Cone and Washer Kit v/CPX and V Series Windlasses  Replacement cones and washers for CPX and V series windlasses. Compatible With: CPX and V Series windlasses In the Box: Cones x two (2) Washers x two (2)  Instruction manual  *Sold as an Indivudual

OceanDMX RC Pro Series Colors 915MHz The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc. Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colors only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual

OceanDMX RC X-Series Colors 915MHz The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc. Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colors only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual

PP4900-02 PowerPod Pre-Cut f/Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black The PP4900 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the p032.01future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Grand Slam 380XL Outrigger w/Offset Handle f/Hard Tops up to 4-1/2" Thick Taco Sport Fishing introduces the GS-380XL, created to meet the growing demands of the marine industry's larger segment of top performance center console boats. Like its predecessor, the GS-380, our GS-380XL offers all the same features and more. Built with a focus in mind to accommodate the needs of the elite center console market which are being built with thicker hardtops that will hold more electronics as well as performance sport fishing equipment. Our GS-380XL will accommodate hard tops up to 4-1/2" in thickness, which can be found on boats 35' to 50'. The new design also offers an extra 2-1/2" of body thickness and two added positions for mounting the handles, either at a 0° or at a 90°, offering additional hard top clearance. Features and Benefits For use on 35' to 50' boats Increased body length to fit hard tops up to 4-1/2" Same profile as the Taco Sport Fishing GS-380 Complete vertical outrigger adjustment from under the hard top Optional 90° handle mounting position for more lever rotation Compatible with Taco Marine hardware including backing plates and wedge plates Designed for hard top applications Rugged Stainless Steel Type 316 and anodized Aluminum construction 12 locking fishing positions Ergonomic shape rotator lever Top mounted 4" X 6" base Compatible with Taco Sport Fishing 1-1/2" heavy duty telescopic outriggers (Aluminum or Carbon Fiber) Sold in pairs Three year limited warranty

8" Alloy Winch Handle - Non-Locking The workhorse of winch handles, the Lewmar alloy handle is made to afford comfort, superior design, and guaranteed ease of use. Features: Ball bearings provide maximum efficiency Durable and lightweight Without locking mechanism Technical Specifications: Material - Alloy  Length - 8"  Locking - No *Sold as an Individual

Pro Series Windlass Gypsy #516  Replacement gypsy on Windlass Model Pro-Fish/Series 1000 Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 9/16 to 5/8" (14.29 to 15.85 mm) (3 strand hard lay up) Chain Size - 5/8" (15.85 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

RAM Handlebar/Rail Mount f/Garmin Montana® Series Included is mounting hardware that will accommodate rails from 0.5" to 1.25" in diameter. This RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana 650t Features: 1. Open access to all electronic ports and camera 2. Patent pending roller design for super smooth placement and removal of the GPS Material: High strength composite