|
Single Locking Flush Deck Socket w/LeveLock Mount & Flange
This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all angle adjustable locking mount, a push button locking pin and a flange gasket with the integral flip-up water seal cap.
Compatible With:
Magma Rectangular Grills and Single Mount Tables
Technical Specifications:
Material - 18-8 Stainless Steel and 356 Anodized Aluminum
Dimensions (W x H) - 2-5/8" x 6-1/16" (6.7 x 15.5 cm)
Weight - 1.22 lb (.56 kg)
*Sold as an Individual
|
54.00 |
|
|
Mount - Dual Locking Flush Deck Socket with Adjustable & Locking LeveLock
Two attractive mirror-polished 18-8 stainless steel flush deck sockets and post sets. The posts are equipped with Magma's versatile LeveLock adjustable locking mount, allowing complete fore and aft adjustment of the table. A push-button lock pin allows use while underway. Sockets feature a flange gasket with an integral flip-up water seal cap. Some fasteners are required for installation.
Specifications:
Width: 3-7/16 in. (129 mm)
Height Full Assembly: 6-1/16 in. (155 mm)
Height Installed: 4-3/16 in. (106 mm)
Weight: 2.40 lb. (1.09 kg)
|
84.37 |
|
|
Dual Locking Flush Deck Socket Mount
Two attractive mirror polished 18-8 stainless steel flush deck socket sets, features a push button lock pin and includes a flange gasket with integral flip-up water seal cap. These sockets mount flush for an uncluttered deck.
Compatible With:
Dual Mounted Grills and Tables
Technical Specifications:
Material - 18-8 Stainless Steel
Dimensions (installed) (W x H) - 2-5/8" x 1-15/32" (9.7 x 3.7 cm)
Weight - 1.51 lb (.69 kg)
*Sold as a Pair
|
67.50 |
|
|
Single Locking Surface Socket with LeveLock® Mount
This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all-angle adjustable locking mount, a push-button locking pin, and a water drainage hole in the side of the socket.
Technical Specifications:
Material - 18-8 Mirror polished Stainless Steel
Dimensions at base (H x W) - 6-1/8" x 2-3/8" (15.6 x 6 cm)
Weight - 1.22lb (.56 kg)
*Sold as an Individual
|
54.00 |
|
|
Bait/Filet Mate Table w/LeveLock® Mount - 31"
Magma’s original Bait/Fillet Mate tables include an engraved logo and ruler that shows the black core for a clean look while increasing visibility when measuring the days catch. Not just designed for bait preparation or fish cleaning, these tables are FDA approved for food preparation or service. Constructed with commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood fillet tables. These tables will not crack, peel, mildew, absorb bacteria or fish odors, allowing you virtually maintenance free use.
Equipped with (2) knife holsters, receptacle for pliers, rounded edges/corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.
These tables are supplied with the LeveLock® all-angle fish rod holder mount, which is our most popular mount and has been manufactured using heat-treated Stainless Steel and hard-anodized aluminum for superior corrosion resistance. It’s quick release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage. The 1-1/2” (38 mm) 304 Stainless Steel tube has 8 different rotation positions and fits most cross-pin type rod holders.
Features:
Slotted back allows for drainage from work surface
All edges and corners rounded for safety
FDA approved for food service
UV stabilized
Will not crack, peel, mildew, or retain fish odors
LeveLock® quick release all angle rod holder mount
Technical Specifications:
Material - 100% High Density Color Core Polyethylene
Table Dimensions (L x W x H) - 31" x 12-1/3" x 3-7/8" (78.74 x 31.24 x 9.65 cm)
Weight -
Mount - LeveLock® all-angle fish rod holder mount
In the box:
31" Bait/Filet Mate Table
LeveLock® Mount
Mounting hardware
Instruction manual
*Sold as an Individual
|
251.99 |
|
|
Rectangle Party Table with LeveLock Mount
Magma's party table provides additional serving space while securing bottles when entertaining on board. Perfect for any sunset cruise or day at the sandbar. Holds a variety of bottle sizes.
Includes the LeveLock all-angle fish rod holder mount, with its quick-release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage.
Features:
FDA Approved and safe to use for food preparation
Long-lasting and resists damage to the sun
Will not crack, peel or absorb mildew or bacteria
Technical Specifications:
Material - Compression molded high-density polyethylene
Mount Application - Single mount
Dimensions (L x W x H) - 18.75" x 12.25" x 3.95" (47.6 x 31.1 x 10 cm)
Weight - 13.1 lbs (5.94 kg)
In the Box:
Table
LeveLock mount
Instruction manual
*Sold as an Individual
|
311.99 |
|
|
Elliptical Party Table with LeveLock Mount
Magma's party table provides additional serving space while securing bottles when entertaining on board. Perfect for any sunset cruise or day at the sandbar.
Includes the LeveLock all-angle fish rod holder mount, with its quick-release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage.
Features:
FDA Approved and safe to use for food preparation
Long-lasting and resists damage to the sun
Will not crack, peel or absorb mildew or bacteria
Technical Specifications:
Material - Compression molded high-density polyethylene
Mount Application - Single mount
Dimensions (L x W x H) - 28" x 14.75" x 3.5" (71.1 x 37.5 x 8.9 cm)
Weight - 16 lbs (7.26 kg)
In the Box:
Table
LeveLock mount
Instruction manual
*Sold as an Individual
|
359.99 |
|
|
16" x 20" White Fillet Table with LeveLock® Mount
This white bait board fillet table has a LeveLock rod holder mount.
Features:
Engraved ruler to measure your catch
Knife and plier holder
Overboard drainage to keep your workstation clean
UV-resistant material resists damage from the sun
Material is approved by the FDA and safe to use for food preparation.
Made in USA
Specifications:
Materials (Board): High-density, polyethylene
Materials (Mount): Stainless steel and cast aluminum
Dimensions: 16 x 20 inches (40.6 x 50.8cm), 8.4 lbs (3.8kg)
|
129.60 |
|
|
244 Flush Deck Mount
With splash cover
For all Scotty post mount rod holders
Dimensions 4" x 2" x 2"
Bolting Dimensions 1 5/16" x 3 3/16"
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
10.49 |
|
|
Rectangle Party Table with Fillet Table and LeveLock Mount
Magma's party table provides additional serving space while securing bottles when entertaining on board. Perfect for any sunset cruise or day at the sandbar.
Slides into the Magma T10-312B Fillet table and LevelLock, both included with this package. Let Magma help you build a mini bar with a view!
Features:
FDA Approved and safe to use for food preparation
Long-lasting and resists damage to the sun
Will not crack, peel or absorb mildew or bacteria
Technical Specifications:
Material - Compression molded high-density polyethylene
Mount Application - Single mount
Dimensions (L x W x H) - 20" x 14" x 7.5" (50.8 x 35.7 x 19.1 cm)
Weight - 20 lbs (9.07 kg)
In the Box:
Table
T10-312B Filet table
LeveLock mount
Instruction manual
*Sold as an Individual
|
431.99 |
|
|
Power Lock
Scotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.
No. 231
Power Lock Rod Holder with No. 244 Flush Deck Mount
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
22.54 |
|
|
281 Bait Caster / Spinning Rod Holder
Holds a bait caster reel in a cushioned cradle.
A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.
Includes No. 244 Flush Deck Mount
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
20.35 |
|
|
Anchor Lock w/ Flush Deck Mount (P/N 244)
Anchor release system for small boats in still-water fishing situations.
Features:
Easy lock and release action allows anchor line adjustment with only one hand.
For use with rope up to 1/2' diameter.
Tough construction and roller bearing for smooth, quiet operation.
Includes No. 244 Flush Mount Bracket
Mount Dimensions: 4" x 2" x 2"
Bolting Dimensions: 1-15/16" 3-3/16"
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.26 |
|
|
Keylocking Flush/Knob Latch - Black Plastic
Features:
Push button opening
Single hole installation
Optional ejector spring helps prevent rattles
Material: Plastic
Color/Appearance: Black
Access Restriction: Key Locking
Grip Range: 22.300-23.100mm (0.88-0.91")
Installation: Threaded body and nut
Panel Thickness: 0.000-10.300mm (0.00-0.41in)
Style: Pull Tab In Line With Latching Pawl
|
18.48 |
|
|
Non-Locking Flush/Knob Latch - Black Plastic
Features:
Push button opening
Single hole installation
Optional ejector spring helps prevent rattles
Material: Plastic
Color/Appearance: Black
Access Restriction: No Restiction
Grip Range: 22.300-23.100mm (0.88-0.91")
Installation: Threaded body and nut
Panel Thickness: 0.000-10.300mm (0.00-0.41in)
Style: Pull Tab In Line With Latching Pawl
|
14.47 |
|