Dual Locking Flush Deck Socket Mount Two attractive mirror polished 18-8 stainless steel flush deck socket sets, features a push button lock pin and includes a flange gasket with integral flip-up water seal cap.  These sockets mount flush for an uncluttered deck.  Compatible With: Dual Mounted Grills and Tables Technical Specifications: Material - 18-8 Stainless Steel Dimensions (installed) (W x H) - 2-5/8" x 1-15/32" (9.7 x 3.7 cm) Weight - 1.51 lb (.69 kg) *Sold as a Pair

Mount - Dual Locking Flush Deck Socket with Adjustable & Locking LeveLock Two attractive mirror-polished 18-8 stainless steel flush deck sockets and post sets. The posts are equipped with Magma's versatile LeveLock adjustable locking mount, allowing complete fore and aft adjustment of the table. A push-button lock pin allows use while underway. Sockets feature a flange gasket with an integral flip-up water seal cap. Some fasteners are required for installation. Specifications: Width: 3-7/16 in. (129 mm) Height Full Assembly: 6-1/16 in. (155 mm)  Height Installed: 4-3/16 in. (106 mm) Weight: 2.40 lb. (1.09 kg)

Single Locking Flush Deck Socket w/LeveLock Mount & Flange This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all angle adjustable locking mount, a push button locking pin and a flange gasket with the integral flip-up water seal cap.  Compatible With: Magma Rectangular Grills and Single Mount Tables  Technical Specifications: Material - 18-8 Stainless Steel and 356 Anodized Aluminum  Dimensions (W x H) - 2-5/8" x 6-1/16" (6.7 x 15.5 cm) Weight - 1.22 lb (.56 kg) *Sold as an Individual 

244 Flush Deck Mount With splash cover For all Scotty post mount rod holders Dimensions 4" x 2" x 2" Bolting Dimensions 1 5/16" x 3 3/16" WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Double Locking Stowable Pedestal Mount  Magma’s 28” locking pedestal mount for rectangular grills and single mount filet tables has a double locking mechanism that insures a secure fit for your boat or home application.  This double locking, Silver metallic anodized Aluminum, pedestal post locks into the surface mounting base and grill mounting bracket with (2) single push-buttons; allowing the entire assembly to be instantly installed or removed and stored for convenience.  The low-profile threaded twist-lock surface mounting base has been designed with a flush bottom so there is no need to cut a hole in your deck and measures just 5/8" tall and 7” diameter with a 5-3/4" bolt pattern.   With its versatility and convenience this is the perfect mounting option for boat swim platforms, boat decks, pontoon boats, or at home on the patio, balcony or deck. Technical Specifications:  Material - Anodized Aluminum Dimensions - Base Plate (H x W) - 17-15/16" x 7" (71 x 17.78 cm) Weight - 4.5 lb (2.05 kg) Mounting Application - Rectangular grills and Single mount tables *Sold as an Individual 

Pow'r Grip LeveLock Double Locking Fish Rod Holder Mount  Just when you thought it couldn't get any better.....this mount adjusts and locks in place at both ends.   We've joined the "LeveLock" Adjustable Fish Rod Holder Mount, with the "Pow'rGrip" Adjustable Fish Rod Holder Mount.  This allows the "Pow'rGrip" portion of the mount to adjust to any size rod holder and lock in place, while the "LeveLock" portion of the mount, adjusts and locks your Magma rectangular grill.  This mount is the strongest, most corrosion resistant, most versatile mount in the industry. Compatible With: Rectangular Grills and Single Mount Tables Technical Specifications: Material - 18-8 Stainless Steel and 356 Anodized Aluminum  Dimensions W x H) - 3-5/8" x 8" (9.3 x 20.3 cm) Weight - 1.77 lb (.81 kg) *Sold as an Individual 

Dual USB-C Power Socket A dual USB-C Power Socket charges two devices simultaneously. The total output 8A load is split 4A per side as needed. USB-C features Power Delivery (PD) for faster and more flexible charging. Enough power to charge phones, pads, and tablets quickly and efficiently. A protective dust cap extends the life of the charger. Features:  Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105) Blue LED illumination  IP65 rating  CE and RoHS compliant Specifications: Output DC: 5V/8A Input: 8-32VDC USB-C Watts: 60W@24V  Plug-In Side Diameter: (inch) 1-7/16"     Length: (inch) 2-1/4" *Sold as an Individual

Power Lock Scotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability. No. 231 Power Lock Rod Holder with No. 244 Flush Deck Mount WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HD IP Flush Vertical Surface Mount - 3MP Max Resolution - 316L Marine Grade Stainless Steel - Recess Mount Dome Iris’ Sx76 series camera is the first of its kind designed to be installed into a bulkhead or vertical surface. Its waterproof stainless steel case is machined from marine-grade 316L stainless steel, which means it will not corrode in harsh saltwater environments, making it a great option as a backup or docking camera for boats. By mounting the camera on the sides of your boat, it can even be used when mooring alongside jetties or pontoons.  During installation, the camera’s inner ball can be adjusted and then locked into position by simply tightening the outer bezel to achieve the desired view.  For IP-based systems, the S476 features 3MP high-definition resolution and 12VDC or PoE power. As well as marine applications, the camera's tough case, and small footprint make it a perfect visibility aid for recreational vehicles, fire and rescue trucks, and other applications where a robust and reliable high-definition camera is required. The camera is certified to EN60945, EN55032, EN55035, and EN60529 (IP66) and is ONVIF compliant. For marine applications, the camera is directly compatible with Raymarine LH2 and above, Simrad, Lowrance, and B & G. For Garmin systems, use them in conjunction with Iris CMAC systems.  Features: 1.8mm Standard (160-degree horizontal field of view) Corrosion-Proof 316L Marine Grade Stainless Steel 3MP Hi-Def IP Camera Format IP Version - max. 3MP Hi-Def resolution Super wide angle 160-degree lens IP version supports PoE and 12VDC - ultra-low power Built-in infrared LED illumination (10m range) EN60945, EN55032, EN55035, EN50529 (IP66) , FCC, CE Shock & vibration proof Super rugged and easy to install Applications: Perfect for extreme environments Workboats & tug boats Fishing vessels Engine room monitoring Law enforcement & military Wind farm vessels SUVs, RVs, work vehicles, and trucks Luxury vessels Passenger ferries & cruise liners Specifications: Lens (millimeter): 1.8mm Horizontal Field of View: 160-degree HFOV Sensor (inch): Sensor 1/4” CMOS Sensor Resolution: Variable - 3MP Max (2304 x 1296) Interface: RJ45 10/100 Base T Ethernet Video Processing: H.264 Codec / Dual Stream Protocols/Video Format: TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF Onvif: Profile S v21.06 Bitrate: VBR / CBR 32kbps 8Mbps Illumination: 6 x 850nm Infra-Red - 10-meter range Lens/Field of View: 1.8mm Standard (160-degree HFOV) Mirroring: Horizontal & Vertical - Configure via Browser Automatic Gain Control: Supported / multiple levels Compatibility: Raymarine / Axiom (LH2 or higher), Simrad / B & G / Lowrance (Latest NOS / NEON OS) / PC-based systems, MFDs with digital (HDMI / DVI) Input, MFDs via IRIS NVR/HVR, IE Browser Operating Temperature: -30 + 60-degrees C Connections: Video: Water Resistant RJ45 Socket / Non-PoE with DC Power Socket Material: Marine Grade 316L Stainless Steel (highly polished as a standard) Power: +12VDC (+10 +15VDC Range) / 1W Nominal / 1.8W Max (LED’s ON) Power Over Ethernet (PoE): IEEE802.3af Weight & Dimensions: 88mm ø x 22.25mm above and below the mounting surface Environmental: EN60529 / IP66 EMC: EN55032:2015/A11:2020 & EN55035:2017/A11:2020 EN60945:2002 Sections 9 & 10 / PoE with Compliant PoE Injector / FCC Part 15 A & B RoHS: EN6300:2018

Two Socket Mounting Plate Only - 10 Pack This dual power socket/meter panel accommodates USB and standard power sockets and meters that are 1-1/8 inches in diameter. Constructed of injection-molded nylon.  Specifications: Distance Between Holes (Length): 3-1/2 in. Distance Between Holes (Width): 1 in. Diameter: 1-1/8 in. Weight: 0.05 lb. Package Size: Includes 10 dual power socket/meter panels

GS-500XL Outrigger Mounts *Only Accepts CF-HD Poles* When it comes to hardcore offshore sport fishing, the Pro Series GS-500 Outrigger Mount is the most durable, attractive, and functional base in the industry. The innovative design of the GS-500 enables anglers to adjust the lift and rotation of outrigger poles from the safety of the deck. This mount also features our patent-pending Twist & Lock pole connection and pairs exclusively with our award-winning Carbon Fiber Tele-Outriggers up to 24’ long.  Features and Benefits: TWIST & LOCK ARM Patent-pending design for easier, more secure pole connection Eliminates the need for pins or bolts when securing outrigger poles HANDLES Rotate and lift outrigger poles from the safety of the deck Heavy-duty, ergonomically shaped outward rotation handle Robust, dual-detented lifting crank handle locks flush into base MOUNT Bottom tube allows for it to operate on hard tops up to 4” thick Ideal for boats from 32 to 50-plus feet  Dredge load tested to handle a full, professional fishing spread  Absorbs the torque and whip created by outrigger poles  Constructed from cast stainless-steel and machined aluminum for a stronger, lighter base Includes matching 6”x 8"x ½” thick oval backing plates  Safety detents prevent uncontrolled rotation when deploying outrigger poles Allows a controlled 180° rotation, if needed Locking head eliminates downward creep of outrigger poles No port or starboard designation  Includes all mounting hardware for easy installation Pairs with 6º Wedge Plates (WP-500-6), sold separately Base hole pattern matches all TACO Marine Grand Slam models – making upgrades possible 3-year limited warranty

Anchor Lock w/ Flush Deck Mount (P/N 244) Anchor release system for small boats in still-water fishing situations.  Features: Easy lock and release action allows anchor line adjustment with only one hand.  For use with rope up to 1/2' diameter.  Tough construction and roller bearing for smooth, quiet operation. Includes No. 244 Flush Mount Bracket Mount Dimensions: 4" x 2" x 2" Bolting Dimensions: 1-15/16" 3-3/16" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flip Pro Max - Dual USB-C Charge Socket Designed for use with either a 12V or 24V input and features 2x 60W USB-C charging ports. It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops, large tablets, phones, and any other USB-C-powered devices onboard. Features: When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements Red LED running light Universal: Universal fit for any USB-C connectors Fast charge (60W max) up to 2 devices at a time Installation: Easy Install, using a Ø32mm (1.25 in.) hole saw Supplied as standard with an optional front fit bezel Marine Ready: IPX4 waterproof with the cover closed UV resistant 316 stainless steel hinge and spring Key Information: To maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12V or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops Specifications: IP Rating: IPX4 waterproof when lid is closed Input Voltage: 10-30V DC (12/24V System) Input Current Max: 6A (10A fuse recommended) Standby Power Draw: 0.01W USB – C Output: 60W max on a 24V system / 36W max on a 12V system

281 Bait Caster / Spinning Rod Holder Holds a bait caster reel in a cushioned cradle. A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top. Includes No. 244 Flush Deck Mount WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

344 Round Flush Deck Mount Sealed base for watertight applications (such as kayak decks) with splash cover. For all Scotty post mount rod holders. Dimensions: 3 3/4" diameter Bolting Dimensions 2 3/16" x 2 3/16" WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.