Spare Paddle Wheel Kit Maretron spare paddle wheel kit WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Paddle Wheel Kit for Raymarine ST40, 60, 60 PLUS, 365/470/750 Kit contains: Paddle wheel Stainless axle  Rubber o-rings

Complete Paddle Wheel Unit Spare complete log impellor unit with skin fitting and 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TA900 Paddle Wheel replacement kit

Paddle Keeper Kit Add or replace paddle holders with the YakGear Paddle Keeper Kit. While there are many ways to mount and store paddles on kayaks and canoes, bungee paddle keepers are by far the most versatile. A 1/4-inch bungee is mounted with terminal ends and a J-hook to form a pressure-based bungee clamp for paddles, fishing poles, and anchor sticks. This kit comes with two paddle keepers, so the versatility and practicality of the product will not be limited to one side of the kayak or canoe. As always, this complete kit comes with all stainless-steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Paddle keepers can be used to store an assortment of items Made of 1/4-in. nylon bungee, it attaches to a vessel using terminal ends and sleeves Each kit comes with two paddle keepers Installation instructions and hardware are included 1-year warranty

Maretron NMEA 2000 Starter Kit Building a New NMEA 2000 Network onboard? Save when buying this Maretron NMEA 2000 Starter Kit. Everything you need for a basic NMEA 2000 Bus/Network or to start a complex one. Please see the ACCESSORIES tab above if additional equipment is needed The Kit Includes: One Micro/Mid Powertap Tee CF-SPWR05-CF Two Micro Tee CM-CF-CF Two Micro Terminators TR-CM One 3 meter Cordset CM-CG1-CF-03.0

NMEA 2000 Starter Kit 1 Maretron's deluxe starter kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA 2000® network.   Contacts are gold-plated brass and couplings are nickel-plated brass for durability and reliability. Included in the Box: (1) 5-Meter Micro Powertap Cable (CF-SPWR05-CF) (1) 10-Meter Micro Trunk/Backbone Cable (CM-CG1-CF-10.0) (1) Micro Tees (CM-CF-CF) (1) 2-Meter Micro Drop Cables (CM-CG1-CF-02.0) (2) Micro Male Terminators (TR-CM) *Sold as a Kit

NMEA 2000 Starter Kit 2  Maretron's deluxe starter kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA 2000® network.   Contacts are gold-plated brass and couplings are nickel-plated brass for durability and reliability. Included in the Box: (1) 5-Meter Micro Powertap Cable (CF-SPWR05-CF) (1) 10-Meter Micro Trunk/Backbone Cable (CM-CG1-CF-10.0) (2) Micro Tees (CM-CF-CF) (2) 2-Meter Micro Drop Cables (CM-CG1-CF-02.0) (2) Micro Terminators (TR-CM) *Sold as a Kit

SIMER 61 PADDLE PUMP KIT

ST850 Paddlewheel & Valve Kit Includes: 1 Paddlewheel and Shaft 4 O-rings 1 Valve Sleeve This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Impellor unit without skin fitting Spare log impellor unit with 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Molded Paddle/Pole Clip Kit - 1-1/4" Clips  Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. The 1-1/4 in. design fits most paddles and push-poles, ranging in circumference from 1-1/4 inch to 1-1/2 inch. This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Molded rubber paddle clips allow for easy paddle or mud anchor storage Two solid rubber-molded paddle clips are provided 1-1/4 clips fit paddles with a circumference ranging from 1-1/4 to 1-1/2 in. Installation instructions and hardware are included 1-year warranty Specifications: Size: 1-1/4 in. clips

Molded Stick Clip Kit - 3/4" Clips Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor. This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Molded rubber paddle clips allow for easy paddle or mud anchor storage Two solid rubber-molded paddle clips are provided 3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in. Installation instructions and hardware are included 1-year warranty Specifications: Size: 3/4 in. clips

 Performance Paddle Clip This one-piece Performance Paddle Clip allows for simple, one-handed storage of a paddle. Features an anti-snag ramp to prevent lines from getting stuck under the clip when not in use and leash attachment points for securing a paddle leash. Kit Includes: Paddle clip (1) 10-32 X 1” PH machine screws (2) 10-32 Nyloc nuts (2) #10 flat washers (2)  #10 well nuts (2) Features: Proudly constructed in the USA of UV-resistant injection molded nylon with stainless steel hardware Able to store a paddle with a diameter of 1-1/8 inches Specifications: Fastener: 1/4 in. PH Weight: 0.18 lbs

Plastic 3-spoke, black, hard PVC steering wheel. 13-1/2" rim size, 3/4" tapered shaft.