LUTZ 0110-201, Drum Pump Tube MSL-PP 41 R HC 39" 

LUTZ Drum Pump Tube 0103-021 Lutz RE88-PP-39" Drum Pump Tube Immersion depth: 39" / 1000 mm Suitable for complete drum drainage with corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas.   Environmentally friendly and cost-efficient. The Lutz complete drum drainage pumps RE are suitable in applications in which toxic, hazardous and valuable liquids need to be drained almost completely from drums and containers.   Liquids: Acids, alkalis, galvanic solutions, hydrazine, phosphates, sulfates, nitrates, etc.   Features: Optimized drum drainage with a residual quantity of approx. 0,1 litres Optional with electric or air driven motors   No grease fillings   Benefits: No problematic tipping for emptying of remaining residual liquid Maximum product utilisation at reduced drum cleaning and waste disposal costs No leakage at inclined position or removal of the pump tube Lube-free pump tube, thus no contamination of the liquid   Materials: RE-PP MS Housing: Polypropylene Seals: FPM Mechanical seal: Carbon, ceramic, FPM, HC-4 (2.4610) Bearing: Pure carbon Drive shaft: Stainless steel (1.4571) Impeller: Polypropylene Immersion tube diameter: 41 mm Temperature of medium: max. 50 °C Hose connection: G 1 1/4 OT Capacity Flow rate:* max. 69 l/min Pumping head:* max. 15 m wc Viscosity:** max. 1000 mPas   *determined with water at 20 °C **determined with oil

LUTZ 0122-205, Drum Pump Tube FEATURES Pump Body:Kynar PVDF, 39 Inch Tube Impeller:ETFE Shaft:Hastelloy C Shaft Seal:The drive shaft of this pump tube is not sealed. The bearing housing unit behind the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube. APPLICATIONS Lutz pump tubes are immersible centrifugal pumps.  The drive shaft of this pump tube is not sealed.  The bearing housing unit behind the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube.  This device guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained. Features:  • Suitable for highly corrosive chemicals and neutral liquids in non-explosive areas  • Optional with electric or air driven motors  • No grease fillings  • Optimized drum drainage  • Modular, service friendly design    Applications:  The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.    Liquid examples: Highly concentrated acids and alkalis, bromic acid, sulphuric acid, nitric acid, dimethyle phthalate, potassium bromate, hydrofluoric acid, etc.

LUTZ 0150-004, Drum Pump Tube MSL-SS-41-L-39"

LUTZ 0132-305, Drum Pump Tubes MSL-ALU-L-39"

LUTZ 0150-001, Drum Pump Tube MSL-SS-41-R-39" 39” stainless steel high volume rotor

LUTZ 0150-002, Drum Pump Tube MSL-SS-41-R-47"

LUTZ 0150-115, Drum Pump Tube MSL-SS-41-R-63"

LUTZ 0151-001, Drum Pump Tube with TRI-CLAMP MMS-SS-39"

LUTZ 0201-004 COUPLING KIT Lutz Drum Pump Part number 0201-004 COUPLING KIT for Lutz Pumps

LUTZ 0110-205 Drum Pump Tube Lutz Drum and Container Pump MSL-PP-41-L-HC-39" for non-flammable liquids Lutz Drum Pumps model MSL-PP 41 is for use with acids and alkalis Applications: The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.   Liquid examples: Acids, alkalis, galvanic fluids, phosphates, nitrates, sulphates, chlorates, etc.   Lutz Multipurpose Sealless Polypropylene Pump Tube Bearing Housing: ETFE / PTFE Drive Shaft: HC-4 (2.4610) Stainless Steel (316 Ti)< Impeller Code: Radial-Flow Impeller Impeller Material: PP Length: 39" Tube Housing: Polypropylene Tube Type: MSL-PP

LUTZ Mixing Pump Tube 0103-150 Lutz MPMS-PP 50/41 L SS 39" Mixing Drum Pumps Immersion depth: 39" / 1000 mm (sealless) Suitable for highly corrosive, aqueous up to slightly viscous liquids in non-explosive areas.   Liquid examples: Hydrochloric acid, sulphuric acid, hydrofluoric acid, etc.   Features: Optional with electric or air driven motors No grease fillings Optimized drum drainage Modular, service friendly design Axial-flow rotor (R) for higher flow rates   Benefits: Lube-free pump tube, thus no contamination of the liquid All-purpose resistant PTFE shaft bearing Easy maintenance without special tools Sealing modules of mechanical sealed (MS) resp. of sealless (SL) pumps are replaceable.   Materials PP-SL Housing: Polypropylene/PVDF Bearing: ETFE / PTFE Drive shaft: Hastelloy C (2.4610) Impeller: PP Immersion tube diameter: 41 mm Temperature of medium: max. 50 °C Hose connection: G 1 1/4 OT   Capacity Flow rate:* max. 170 l/min Pumping head:* max. 12 m wc Viscosity:** max. 350 mPas   *determined with water at 20 °C **determined with oil

Lutz 0110-200, MSL-PP-41-R-HC-27" Drum Pump Tube

LUTZ 0110-202, MSL-PP-41-R-HC-47" Drum Pump Tube

LUTZ 0110-215, Drum Tube MSL-PP-41-R-HC-63"