Lutz Drum Pump Air Motor 0004-086 Lutz MD-1 Drum Pump Motor Compact compressed air motor for handling neutral and aggressive liquids.  • Overload-proof • Delivery flow is easy to control • 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm/min.)

LUTZ 0122-205, Drum Pump Tube FEATURES Pump Body:Kynar PVDF, 39 Inch Tube Impeller:ETFE Shaft:Hastelloy C Shaft Seal:The drive shaft of this pump tube is not sealed. The bearing housing unit behind the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube. APPLICATIONS Lutz pump tubes are immersible centrifugal pumps.  The drive shaft of this pump tube is not sealed.  The bearing housing unit behind the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube.  This device guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained. Features:  • Suitable for highly corrosive chemicals and neutral liquids in non-explosive areas  • Optional with electric or air driven motors  • No grease fillings  • Optimized drum drainage  • Modular, service friendly design    Applications:  The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.    Liquid examples: Highly concentrated acids and alkalis, bromic acid, sulphuric acid, nitric acid, dimethyle phthalate, potassium bromate, hydrofluoric acid, etc.

Lutz Drum Pump Motor 0030-002 Lutz Drum Pump Motor B36 Compact and powerful universal motor suitable for pumping thin-bodied acids, alkalis and solutions.   Light and convenient Optionally with infinitely variable speed controller for a controlled flow rate Internally ventilated 110-120 V / 60 Hz, 640W / 0.85 HP, without low-voltage release Double insulation in keeping with type of protection class II, splash water protected in keeping with IP 24, double-pole ON/OFF switch and single-pole thermal overcurrent release. 16´ connection cable with plug. Not explosion-proof. Undemanding universal motor designed for industrial applications and suitable for pumping thin-bodied, slightly viscous, neutral, aggressive and non-flammable fluids. It demonstrates its power even when handling acids and alkalis.

LUTZ 0030-010 Drum Pump Motor Lutz Universal Drum Pump Motor B36 SC MI4E Compact and powerful universal motor suitable for pumping thin-bodied acids, alkalis and solutions.   Features : Light and convenient Optionally with infinitely variable speed controller for a controlled flow rate Internally ventilated 110-120 V / 60Hz, 640 W / 0.85 HP Open drip proof in accordance with protection class IP 24, double insulated, 16´ (5 m) cord and plug Type of drive: Explosion Protection Electric not explosion-proof

Lutz Silver Star Drum Pump Motor 0040-200 Lutz MEI 6 Silver Star Universal Drum Pump Motor A light, easily handled, explosion proof motor, suitable almost all types of thin-bodied, slightly viscous, flammable liquids.   Extremely rigid aluminium casing, robust high-power motor Electronic speed control to constantly ensure the right flow rate Separate ON/OFF buttons with low voltage release for safety and ease of handling 120 V / 60Hz 640 W / 0.85 HP Splash-proof in accordance with protection class IP 54, 16´ (5 m) cord, optionally with remote operating kit.

LUTZ Drum Pump Motor 0060-004 Lutz B55T-5/MAII 5 Drum Pump Motor Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.   Features: Robust and powerful Double wall housing protects inner parts from corrosion Externally ventilated 110-120 V / 60Hz, 510 W / 0.68 HP (B 55-T-5) TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16´ (5 m) cord and plug

Lutz 0110-200, MSL-PP-41-R-HC-27" Drum Pump Tube

Lutz Drum Pump Motor 0028-000 Lutz Drum Pump Motor B28 B28 Universal Motor Power - 800 watt/1.07 HP Voltage - 120V Frequency - 860 Hz Enclosure - open drip proof, 16' cord and plug

LUTZ 0110-205 Drum Pump Tube Lutz Drum and Container Pump MSL-PP-41-L-HC-39" for non-flammable liquids Lutz Drum Pumps model MSL-PP 41 is for use with acids and alkalis Applications: The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.   Liquid examples: Acids, alkalis, galvanic fluids, phosphates, nitrates, sulphates, chlorates, etc.   Lutz Multipurpose Sealless Polypropylene Pump Tube Bearing Housing: ETFE / PTFE Drive Shaft: HC-4 (2.4610) Stainless Steel (316 Ti)< Impeller Code: Radial-Flow Impeller Impeller Material: PP Length: 39" Tube Housing: Polypropylene Tube Type: MSL-PP

LUTZ 4GT, Compressed Air Pump Motor Pump Tubes are offered in standard lengths of 27 in for 30 gallon drums or smaller, 39 in for 55 gallon drums and 47 in for IBCs. SS Pump Tubes, recommended for flammables include a wall hanger, one 10 ft bonding wire and two 6 ft grounding wires. Select air or electric explosion-proof motors. PP Pump Tubes include wall hanger, 8 ft PVC 3/4 in hose, two hose clamps and PP 2 in bung adapter. PVDF Pump Tubes include a wall hanger.   Power: 220 watt/0.3 HP Operating Pressure: 87 PSI Air consumption: 14 CFM

Lutz Pump 0004-736 Xl Air Motor Md2

LUTZ Mixing Pump Tube 0103-150 Lutz MPMS-PP 50/41 L SS 39" Mixing Drum Pumps Immersion depth: 39" / 1000 mm (sealless) Suitable for highly corrosive, aqueous up to slightly viscous liquids in non-explosive areas.   Liquid examples: Hydrochloric acid, sulphuric acid, hydrofluoric acid, etc.   Features: Optional with electric or air driven motors No grease fillings Optimized drum drainage Modular, service friendly design Axial-flow rotor (R) for higher flow rates   Benefits: Lube-free pump tube, thus no contamination of the liquid All-purpose resistant PTFE shaft bearing Easy maintenance without special tools Sealing modules of mechanical sealed (MS) resp. of sealless (SL) pumps are replaceable.   Materials PP-SL Housing: Polypropylene/PVDF Bearing: ETFE / PTFE Drive shaft: Hastelloy C (2.4610) Impeller: PP Immersion tube diameter: 41 mm Temperature of medium: max. 50 °C Hose connection: G 1 1/4 OT   Capacity Flow rate:* max. 170 l/min Pumping head:* max. 12 m wc Viscosity:** max. 350 mPas   *determined with water at 20 °C **determined with oil

LUTZ 0132-305, Drum Pump Tubes MSL-ALU-L-39"

LUTZ 0150-004, Drum Pump Tube MSL-SS-41-L-39"

LUTZ 0201-004 COUPLING KIT Lutz Drum Pump Part number 0201-004 COUPLING KIT for Lutz Pumps