Little Giant 102703 Impeller  

Little Giant Impeller 599092  

Little Giant Impeller Assembly 599094

Little Giant Mag-Drive Aquarium Pump 580507 Little Giant 2-MDQX-SC Magnetic Drive Aquarium Pump Motor 115 Volt 60Hz 1/30 HP Open Fan Cooled Motor, 770 GPH at 1 Foot Head, Shutoff Head 8.1 Feet, Inlet: 1" FNPT, Outlet: 1" MNPT or 1-1/4" Tubing, Polypropylene Body, UL/CSA Listed, 6 Foot Power Cord   580507 Little Giant 2-MDQX-SC features a leakproof, seal-less magnetic drive and a more quiet operation for freshwater and saltwater aquariums. Little Giant 2-MDQX-SC has 1" MNPT discharge and 1" FNPT Intake with head capacity of 8.1'. The MDQX model is best suited for free-flow setups, where water encounters very little back pressure. The volute, magnet housing and impeller of 2-MDQX-SC are glass-filled polypropylene encapsulated for excellent chemical resistance. The ceramic shaft and thrust washers are 99.5% pure alumina provide unparalleled wear and trouble-free service. The O-ring seals are nitrile (Buna-N).   Little Giant's powerful 1/30 HP thermally protected, totally enclosed, motor delivers 770 GPH of fluids at 1' total dynamic head. Little Giant 2-MDQX-SC has been factory-tested for capacity, control operation and electrical continuity to assure maximum performance and safety.

Little Giant Biomedia Media Kit 566112 Little Giant BM-30-PW Bioball Media Kit Annual maintenance is critical for keeping your Little Giant PF Pressurized pond filter working efficiently. Replace your biomedia for the Little Giant PF-800, PF-1200 and PF-2400 and ensure that the filter is working at the highest efficiency and keeping your pond looking clean and clear.   Bioballs - Biomedia - BM-30-PW Fits the Little Giant PF-800, PF-1200, PF-2400 Filters as well as many other filters that use the bioball type media. Each bioball measures approx 1-1/2" diameter Includes about 30 balls

Little Giant F50-5000 Pump 566728 The Little Giant F50-5000 Wet Rotor Pump is a flexible, multi purpose pond pump that can be used submerged or externally, as well as vertically or horizontally.   Specifications Little Giant Part Number: 566728 Maximum Flow Rate: 5,020 GPH Flow Rate @ 1 Ft. of Head: 4,888 GPH Flow Rate @ 5 Ft. of Head: 4,332 GPH Flow Rate @ 10 Ft. of Head: 3,599 GPH Flow Rate @ 15 Ft. of Head: 2,799 GPH Flow Rate @ 20 Ft. of Head: 1,938 GPH Flow Rate @ 25 Ft. of Head: 885 GPH Maximum Head: 28.5 ft. Power Consumption: 413 W Discharge: 2″ MPT (male threaded) Power Cord Length: 20 ft. Voltage: 115 V, 60 Hz. Dimensions: 13.25″ L x 6.1″ W x 8″ H  

Little Giant Centrifugal Pump 532002 Little Giant 35-0M Centrifugal In-Line Pump Motor 115 Volt 60 Hz 1/11 HP Open Double Insulated Motor, 170 GPH at 10 Foot Head, Shutoff Head 87 Feet, Inlet: 3/8" Hose Barb, Outlet: 3/8" Hose Barb, Includes 1/4" Barbed O.D. By-pass Adapter, Nylon Body, Ryton Impeller, Fluid Temperature Up to 120F (49C), 2 Foot Wire Leads   532002 Non-submersible, high pressure pump for carpet cleaners, dispenser-displays and pressure-washer applications. Double-insulated motor (non-replaceable brushes last 500 to 1,000 hours) with 94-V-O thermoplastic housing.   Not recommended for fountains

Little Giant 35-OM-SK Repair Kit 599106 Little Giant 35-OM-SK Replacement Parts Kit for 35-OM Pumps Includes the following parts: Housing, Carbon Seal, and Impeller with Ceramic Seal & O-ring

Little Giant Cent. Pump 566024 Little Giant OPWG-97 Centrifugal Pond Pump Motor 115 volts or 230 Volts 60Hz 1/4 HP Enclosed Fan Cooled Continuous Duty Motor, 5820 GPH at 5 Foot Head, Shutoff Head 22 Feet, Inlet: 1-1/2" FNPT, Outlet: 1-1/2" FNPT, Thermoplastic Body, Noryl Impeller, Mechanical Seal, Not Self-Priming, UL/CSA Listed, No Power Cord Conduit Box   566024 Centrifugal pump for Water Gardens and Ponds. Built to handle the elements; the pump heads are injection-molded with corrosion resistant motors. Continuous duty pump designed for use outside of pond. Can move large volumes of water quietly and efficiently through filtration systems, waterfall or stream. Its compact size takes up a small foot print. Energy-Saving centrifugal pump. A priming pot and check valve is recommended for installations where the pump is located above the water source.

Little Giant Mag-Drive Pump 566716 Little Giant PES-130-PW Magnetic Drive Statuary Fountain Pump Motor 120 Volt 60 Hz Epoxy Encapsulated Motor, 130 GPH at 1 Foot Head, Shutoff Head 5.5 Feet, Inlet: Screened, Outlet: 3/8" or 1/2" Hose Barb, Adjustable Flow Control, 6 Foot Power Cord   566716 Mag-drive pumps utilize an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller and acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor. They are seal-less and oil-less

Little Giant Fountain Pump 566718 Little Giant PES-380-PW Magnetic Drive Statuary Fountain Pump Motor 120 Volt 60 Hz Epoxy Encapsulated Motor, 350 GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Screened with Filter Media, Outlet: 3/8" or 1/2" Tubing, Adjustable Flow Control, 15 Foot Power Cord   566718 Mag-drive pumps utilize an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller and acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor. They are seal-less and oil-less

Little Giant Pump 566720 Little Giant PES-700-PW Magnetic Drive Statuary Fountain Pump Motor 120 Volt 60 Hz Epoxy Encapsulated Motor, 725 GPH at 1 Foot Head, Shutoff Head 8 Feet, Inlet: Screened with Filter Media, Outlet: 3/4" Tubing, Adjustable Flow Control, 15 Foot Power Cord   566720 Mag-drive pumps utilize an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller and acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor. They are seal-less and oil-less.

Little Giant Cent. Pump 555101 Little Giant UPSP-5 Centrifugal Utility Pump Motor 115 Volt 60 Hz 1/2 HP Intermittent Duty Motor, 1152 GPH at 20 Foot Head, Shutoff Head 105 Feet, Inlet: 3/4" FNPT, Outlet: 3/4" FNPT, with 3/4" Male Garden Hose Fittings, Self-Priming to 15 Feet, Cast Iron Housing, Thermoplastic Impeller, Mechanical Seal, Fluid Temperature Up to 140F (60C), UL/CSA Listed, 10 Foot Power Cord   555101 Non-submersible, in-line, portable utility transfer pump with rugged one-piece cast iron housing and integral carrying handle. Self-priming to 15' when priming chamber is filled. Ideal for flooded basements, watering lawns and draining water heaters. Can also be used to boost water pressure for washing vehicles, sidewalks and more.

Little Giant Mag Drive Pump 566714 Little Giant PES-80-PW Mag-Drive Statuary Fountain Pump Motor 120 Volt 60 Hz Epoxy Encapsulated Motor, 80 GPH at 1 Foot Head, Shutoff Head 3.5 Feet, Inlet: Screened, Outlet: 3/8" or 1/2" Hose Barb, Adjustable Flow Control, 6 Foot Power Cord   566714 Mag-drive pumps utilize an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller and acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor. They are seal-less and oil-less

Little Giant Submersible Pump 501203 Little Giant 1-42 Submersible Pump Little Giant Submersible or In-Line Pump, 115Volt 60Hz 1/150HP Permanently Lubricated Oil Filled Motor, 205GPH at 1 Foot Head, Shutoff Head 7.4 Feet, Inlet: 1/2" MNPT and 1/4" FNPT , Outlet: 1/4" MNPT and 1/2" Tubing, Epoxy Coated Aluminum Housing, Fluid Temperature Up to 120F (49C), UL Listed, 6 Foot Power Cord   501203 Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial, and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.