|
12 V Heavy Duty Tab Actuator - 6' Cable
Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design.
The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket.
Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 6' (1.8 M)
Actuator Vertical Height - 11.875" (302 mm)
Upper Mounting Bracket - Stainless Steel - 12 gauge
Lower Mounting Bracket - Standard
*Sold as an Individual
|
234.85 |
|
|
12 V Heavy Duty Tab Actuator - 6' Cable for Everglades Boats
Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design.
The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket.
Compatible With:
Everglades Boats
Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 6' (1.8 M)
Actuator Vertical Height - 11.875" (302 mm)
Connectors - Deutsch style
*Sold as an Individual
|
233.20 |
|
|
12 V Heavy Duty Tab Actuator - 23' Cable
Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design.
The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket.
Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Upper Mounting Bracket - Bolt, nut and washer
Lower Mounting Bracket - Bolt, nut, spacer and washer
*Sold as an Individual
|
251.33 |
|
|
12 V Short Trim Tab Actuator - 23' Cable
Ideal for limited vertical height applications such as swim platforms, Lectrotab short trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.
The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The short actuator incorporates either a standard or low profile transom mounting bracket.
Features:
Short actuator perfect for swim platform or limited vertical height applications
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 10" (254 mm)
Upper Mounting Bracket - Low Profile
Lower Mounting Bracket - Standard
*Sold as an Individual
|
238.96 |
|
|
12 V Trim Tab Actuator - 6' Cable
Lectrotab trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing.
No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a transom mounting bracket.
Features:
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Upgrades to most popular hydraulic and electromechanical systems
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 6' (1.8 M)
Actuator Vertical Height - 11.875" (302 mm)
Upper Mounting Bracket - Standard
Lower Mounting Bracket - Standard
*Sold as an Individual
|
209.29 |
|
|
12 V Trim Tab Actuator - 23' Cable
Lectrotab trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing.
No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a transom mounting bracket.
Features:
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Upgrades to most popular hydraulic and electromechanical systems
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Upper Mounting Bracket - Standard
Lower Mounting Bracket - Standard
*Sold as an Individual
|
220.84 |
|
|
4-Way Nylon Heavy-Duty Ratchet Mount with Cable Slot & Built-In Coax Cable Feed-Thru 1"-14 Thread
4 way ratchet mount in reinforced nylon UV resistant design with handle for deck or bulkhead. Hole for GPS and feed-thru for coax cable. Usable with antennas no longer than 9' in self supporting mode. Standard 1" x 14 thread.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.79 |
|
|
15A 12/3 Heavy-Duty Extension Cord - 25'
Heavy-duty marine-grade cable with robust, fully molded ends for use in harsh environments.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.91 |
|
|
15A 12/3 Heavy-Duty Extension Cord - 50'
Heavy-duty marine-grade cable with robust, fully molded ends for use in harsh environments.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.03 |
|
|
Heavy Duty Adjustable Rod Holders
Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.
|
18.29 |
|
|
Heavy Duty Adjustable Rod Holders
Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods.
|
17.33 |
|
|
Heavy-Duty Adjustable Rod Holder with Combo Mount - White
This rod holder is designed for use with baitcasting and spinning reels.
Features:
An ergonomic design and easy-to-find rapid-release latch
Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings
Specifications:
Color: White
*Sold as an Individual
|
18.29 |
|
|
Heavy-Duty 1/2" Dock Line - 12' with 12" Loop
Heavy Duty Marine Dock Line 1/2" diameter x 12' Long with a 12" loop on one end.
Features:
Marine Grade Woven Rope
Black Material
Heavy-Duty
Melted ends for anti-fray
12” loop on one end
1/2” diameter thick
Works great with all Yamaha Swim Deck Bags
Also works great with all inflatable fenders and bumpers
|
16.87 |
|
|
Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array Radars
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
6" Heavy Duty Aft Mount
6" Tall
Aft raked 30 degrees
|
432.00 |
|
|
Mate USA M164-200-12 12V GEAR PUMP 2.6 GPM DIESEL
FEATURES
Pump Body: Nickel Plated Brass
Port Size: 3/8" BSP (British) Female Threaded Ports and 3/8" NPT Male Threaded Ports
Flow: Up To 2.6 GPM
Pressure: 21.8 PSI
Gears:Bronze
Shaft Seal: Lip Type
Shaft: Stainless Steel
Motor:12 Volt
Heavy Duty Ball Bearing Design
Motors are ISO 8849 Marine (Bilge Standard)
IP Protection 67
APPLICATIONS
Diesel Transfer
Refueling,
Light Weight Oils,
Fresh Water and Glycol Antifeeze
|
206.70 |
|