|
High Intensity "Anywhere" Light - Brushed Housing - White Non-Dimming
Where can you use a light that is attractive, bright, and small, completely sealed and withstands the elements yet blends with well-appointed interiors? Well, anywhere! Lumitec's "Anywhere Light" is the high intensity surface mount light that you don't have to hide. Quality aluminum housing with Type II anodizing for an appealing satin look that will stand up to the elements. Choose white, red, or blue output. Completely sealed, IP67 compliant.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 315mA
24V DC Amps: 175mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White): 136
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 1.73" (4.39cm)
Height: 1.73" (4.39cm)
Depth: 0.45" (1.15cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.00 |
|
|
Lumitec High Intensity "Anywhere" Light - Brushed Housing - Red Non-Dimming
Where can you use a light that is attractive, bright, small, completely sealed, withstands the elements yet blends with well appointed interiors? Well, anywhere. Lumitec's "Anywhere" Light is the high intensity surface mount light that you don't have to hide. Quality aluminum housing with Type II anodizing for an appealing satin look that will stand up to the elements. Completely sealed, IP67 compliant. 90mA @ 12VDC.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 315mA
24V DC Amps: 175mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White): 136
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 1.73" (4.39cm)
Height: 1.73" (4.39cm)
Depth: 0.45" (1.15cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.00 |
|
|
High Intensity "Anywhere" Light - Brushed Housing - Blue Non-Dimming
Where can you use a light that is attractive, bright, and small, completely sealed and withstands the elements yet blends with well-appointed interiors? Well, anywhere! Lumitec's "Anywhere Light" is the high intensity surface mount light that you don't have to hide. Quality aluminum housing with Type II anodizing for an appealing satin look that will stand up to the elements. Choose white, red, or blue output. Completely sealed, IP67 compliant.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 315mA
24V DC Amps: 175mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White): 136
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 1.73" (4.39cm)
Height: 1.73" (4.39cm)
Depth: 0.45" (1.15cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.00 |
|
|
Orbit - Flush Mount Down Light - Brushed Finish - White Non-Dimming
Class-leading output, weatherproof construction, and the simplest installation in the industry - Lumitec's Orbit Flush Mount Down Lights stand apart from the crowd. With a shallow-depth profile (less than 1/2" mounting depth) and a secure composite mounting system the lights are ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. Fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and multi-color control without external control modules, specialized switches, or additional wire runs.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 315mA
24V DC Amps: 175mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White): 136
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 1.99" (5.05cm)
Height: 1.99" (5.05cm)
Depth: 0.72" (1.82cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
49.68 |
|
|
Orbit Spectrum Flush Mount Down Light - Brushed Housing - White Dimming & Red/Blue Non-Dimming
Class-leading output, weatherproof construction, and the simplest installation in the industry. With a shallow-depth profile (less than 1/2" mounting depth) and a secure composite mounting system, these lights are ideal for a variety of cabin and t-top uses. Intelligent circuitry enables advanced features like dimming and multi-color control without external control modules, specialized switches, or additional wire runs. Completely water sealed and IP67 compliant.
Specifications:
Lumens (White): 187
Voltage: 10-30V DC
12V DC Amps: 300mA
24V DC Amps: 150mA
Rated Watts: 4
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: 1-1/4"
Length: N/A
Width: N/A
Depth: 0.70in (1.77cm)
Diameter: 1.99in (5.05cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
105.06 |
|
|
"Anywhere" Light - Brushed Housing - Tri-Color - White, Blue & Red
Where can you use a light that is attractive, bright, small, completely sealed, withstands the elements yet blends with well appointed interiors? Well, anywhere. Lumitec's "Anywhere" Light is the high intensity surface mount light that you don't have to hide. Quality aluminum housing with Type II anodizing for an appealing satin look that will stand up to the elements. Completely sealed, IP67 compliant. 90mA @ 12V DC.
Features:
Surprisingly bright light from a small attractive package
Glass lens won't scratch, haze, or yellow
Voltage: 12V DC
Current: 90mA @ 12V DC
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
88.03 |
|
|
SeaBlaze Mini Underwater Light - Pair - Brushed Finish - White Non-Dimming
The diminutive SeaBlaze Mini packs a surprising punch! SeaBlaze Mini leverages many of the technologies utilized in the world's most popular underwater light, the SeaBlaze3, to ensure years of trouble free service. With an actual MEASURED output of more than 700 lumens, there is simply no better value in underwater lighting. Perfect for smaller trailer boats, skiffs, or dinghies. Sold as a pair.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 990mA
24V DC Amps: 450mA
Correlated Color Temperature: 6500
Color Rendering Index: 70+
Lumens (White): 890
Rated Watts: 12
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 2.98" (7.57cm)
Height: 2.98" (7.57cm)
Depth: 0.58" (1.48cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
244.58 |
|
|
Echo Courtesy Light - Brushed Housing - White Light
Small, attractive and discreet, Echo lights offer more light output than many 'full size' overhead lights. Measuring about 1" in diameter or less Echo is clean, almost flush, and easy to install. Fully water sealed and IP67 compliant Echo is perfect for interior or exterior installations.
Features:
Lumens (White): 45
Voltage: 10-16V DC
12V DC Amps: 45mA
24V DC Amps: N/A
Rated Watts: 0.55
CCT: 5000
CRI: 70+
Op. Temp F/C: -31°F/35°C to + 131°F/55°C
Timed Toggled Protocol (TTP): No
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: 11/16"
Length: N/A
Width: N/A
Depth: 0.81" (2.06cm)
Diameter: 1.24" (3.15cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
27.35 |
|
|
Capri3 Spreader Light - White Non-Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
80.14 |
|
|
Caprera3 Spreader Light - White Non-Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
80.06 |
|
|
Halo Down Light - Brushed Housing, Red with White Dimming Light
Lumitec's Flush Mount Down Lights set a new standard in overhead lighting. The luminaires feature weatherproof construction suitable for interior or exterior installations, a shallow-depth profile (less than 1/2" below mounting surface) and an easy to install mounting system. Ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. The lights are fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming without external control modules or specialized switches. This allows boat owners to use any existing 'on-off' switches and eliminates the need for multiple wire runs necessary for other multi-colored lights. 10 to 30VDC, draws 220mA @ 12, 110mA @ 24V.
Features:
Intelligent circuitry allows for dimming using your existing SPST switch
Sealed for long life and extreme durability - IP 67 compliant, interior or exterior use
Attractive compact design for helm station, flybridge, hard top, and interior spaces
Mounting system is easy and fast - no 'rat traps', no exposed fasteners
More features, smaller package, and lower price than competitive products
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
97.08 |
|
|
Maxillume2 - High Power/Pedestal Mount Flood Light - Brushed Finish - White Dimming
A blending of Lumitec's two most popular and powerful flood lights. The Maxillume2 offers all the benefits of its predecessors in a smaller, sleeker package, with higher output and a wider coverage area. Maxillume2 delivers the light output equivalent of a 200 to 300 watt halogen light. Designed and manufactured completely in the US, the light boasts a completely sealed marine grade housing and Lumitec's proprietary DeckSweep© technology. This radially asymmetric pattern puts light where you need it most, meaning more useable light and less wasted power. Now with dimming.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 2.95A
24V DC Amps: 1.38A
Correlated Color Temperature: 4500
Color Rendering Index: 70+
Rated Watts: 36
Lumens (White): 2100
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 8.30" (21.08cm)
Height: 2.72" (6.91cm)
Depth: 2.13" (5.41cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
419.99 |
|
|
Caprera3 Spreader Light - White Non-Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
80.06 |
|
|
Capri3 Spreader Light - White Non-Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
80.14 |
|
|
Maxillume2 - High Power/Flush Mount Flood Light - Brushed Finish - White Dimming
Lumitec has expanded the wildly successful Maxillume flood light family to include a sleek flush-mount high powered flood light. Boasting the light output equivalent of a 200 to 300 watt halogen light, the light is in use by some of the world's top custom yacht builders. Designed and manufactured completely in the US, the light utilizes a completely sealed marine grade housing and Lumitec's proprietary DeckSweep© technology. This radially asymmetric pattern puts light where you need it most, meaning more useable light and less wasted power. Now with dimming.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 2.95A
24V DC Amps: 1.38A
Correlated Color Temperature: 4500
Color Rendering Index: 70+
Rated Watts: 36
Lumens (White): 2100
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 8.30" (21.08cm)
Height: 2.72" (6.91cm)
Depth: 2.13" (5.41cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
565.79 |
|