|
MB-7
R-A-M 1" ball mount bracket with arm and mounting plate.
Works with: Accura 240, Cuda 168 EX, FishEasy 2, FishElite 320, FishElite 480, FishElite 500C, FishElite 502C iGPS, FishElite 640C, FishElite 642C iGPS, FishMark 160, FishMark 240, FishMark 320, FishMark 480, FishMark 500C, FishMark 640C, GlobalMap 2400, GlobalMap 2400, GlobalMap 3200, GlobalMap 3300C, GlobalMap 3500C, GlobalMap 4800, IntelliMap 320, IntelliMap 480, IntelliMap 500C, IntelliMap 502C iGPS, IntelliMap 642C iGPS, Journey, LMS-240, LMS-320, LMS-330C, LMS-332C, LMS-334C iGPS, LMS-335C DF, LMS-337C DF, LMS-339C DF iGPS, LMS-480, SeaCharter 320DF, SeaCharter 480DF, SeaCharter 500C DF, SeaCharter 502C DF iGPS, SeaCharter 640C DF, SeaCharter 642C DF iGPS, SeaFinder 240DF, SeaFinder 320DF, Status, Trifinder 2, X100C, X102C, X105C DF, X107C DF, X125, X135, X136DF, X51, X58DF, X-71, X87, X88DF, X-91, X97, X98DF
|
36.41 |
|
|
MB-8
R-A-M 1-1/2" ball mount bracket with long arm and mounting plate.
Works with: FishMark 160, FishMark 240, GlobalMap 1000, GlobalMap 2000, GlobalMap 2400, GlobalMap 3000, GlobalMap 4000M, GlobalMap 5000C, GlobalMap 6000C, GlobalMap 7000C, GlobalNav II, GlobalNav IIA, LCX-104C, LCX-111C HD, LCX-113C HD, LCX-15CI, LCX-15CT, LCX-15MT, LCX-16CI, LCX-17M, LCX-18C, LCX-19C, LCX-20C, LCX-25C, LCX-26C HD, LCX-27C, LCX-28C HD, LCX-37C, LCX-38C HD, LMS-240, LMS-350, LMS-350A, X-70, X-70A, X-71, X-91
|
50.96 |
|
|
1" Ball Mount with 6.25" X 2" Rectangle Base & Diamond Base
The RAM-B-111-238U consists of a double socket arm, 2.43" x 1.31" diamond base and 6.25" x 2" rectangle base. The diamond base contains two holes 1.912" from center to center, positioned at both ends of the base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
Weight: 0.66 lbs.
|
32.00 |
|
|
1" Ball Mount with Custom GoPro® Hero Adapter
The RAM-B-138-GOP1U consists of a 2.5" diameter round base with the universal AMPS hole pattern, STANDARD size double socket arm and 1" diameter ball with custom GoPror Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM-B-138-GOP1 can be used as a drill-down or a temporary, removable mounting solution with the addition of the RAP-339U accessory. The GoPror Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. GoPro camera and black thumb screw not included with purchase.
|
28.64 |
|
|
RAM Composite 1" Ball Mount with 6.25" X 2" Rectangular Plate & Track Ball™ Base
The RAP-B-111B-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 6.25" x 2" rectangle plate. The 6.25" x 2" rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The Track Ball™ base can connect to virtually any track system including the RAM Tough-Track™
Overall Height:
6"
Ball Size:
1" Rubber "B" Ball Size
Material:
High Strength Composite Base
Marine Grade Aluminum Plate
Note:
Part number reflects product packaged in a poly bag.
|
30.60 |
|
|
RAM 1" Ball Mount with Track Ball™ Base & 1.5" x 3" Plate for the Humminbird Helix 5 ONLY
The RAP-B-202-153-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 1.5" x 3" rectangular plate. The rectangular plate contains four holes that will line up with the Humminbird Helix 5. The Track Ball™ will connect to virtually any track system including the RAM Tough-Track™
Overall Height:
5"
Material:
High Strength Composite
Ball Size:
1" Rubber Ball Size
Note:
Part number reflects product packaged in a poly bag. Hardware for mounting to device not included with purchase.
|
28.40 |
|
|
TripleShot Transom Mount Bracket
Transom mount bracket for TripleShot Transducer
|
10.46 |
|
|
158 1" Ball with Low Profile Track Mount
Adapt your Scotty low profile track to our 1″ ball mounting system. For use with all Scotty 1″ ball mounts and Scotty low profile tracks.
Features:
1″ Ball with Track Adapter
|
13.39 |
|
|
159 1" Ball with Post Mount
Adapt your Scotty post mount to our 1″ ball mounting system. For use with all Scotty post mounts.
Features:
1" Ball with Post
|
12.11 |
|
|
D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ Wrench
The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-D-111U-C is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird Fishfinders and GPS Chartplotters
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters
Overall Height:
8.125"
Weight Capacity:
Up to 15 lbs.
Weight:
3.45 lbs.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber "D" Ball Size
Hi-Torq™ Wrench
The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.
|
144.56 |
|
|
Fishfinder Mount for Lowrance Hook2 Series - 1" Track Mount
Designed for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and base to virtually any track system including the RAM® Tough-Track™. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable.
T-Bolt Dimensions:
.48" x .95"
Material:
High Strength Composite and Marine Grade Aluminum
Ball Size:
1" Rubber Ball Size
Note:
Part number reflects product packaged in a retail bag store shelf display.
|
34.94 |
|
|
1" Ball "Light Use" Composite Mount f/Lowrance Elite-4 & Mark-4 Series Fishfinders
The RAP-B-101U-LO11 consists of a composite 2.5" diameter round base with the universal AMPS hole pattern, composite double socket arm and adapter base that inserts directly to the back of Lowrance Elite-4 and Mark-4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Material:
High Strength Composite
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends this mount for "Light Use" mounting applications, including light weight Lowrance Elite and Mark Fishfinders.
|
24.30 |
|
|
ProMount Quick Release Mounting Bracket
For years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS or portable radios. The ProMount Quick Release Bracket makes it possible to easily remove your electronics weighing up to three pounds from a permanently mounted base with one hand. The 360-degree swivel adjustment lets you see the unit from any angle. The Pro Mount will fit nearly all Lowrance, Garmin, Eagle, Hummingbird, Pin-Point and Vexilar electronics. The permanent base is available separately too, which makes it easy to place several bases around the boat or even in another boat. Several systems have been mounted in trucks to hold GPS units with great success.
The ProMount sells for much less than current brackets, but with more features and versatility. The sleek, low profile of the ProMount is only 1 1/8 inches high. The permanent base has no sharp edges to step-on or wear a hole in your boat cover. An optional installation hole cover spacer comes with every base to give you a well finished look to the mount when installed. Your electronics can also be mounted overhead and hang down on the secure locking rail system of the ProMount to increase the potential places you can mount electronics. The ProMount Quick Release Bracket comes with all stainless steel mounting hardware and the bracket is corrosion resistant. The ProMount is self-draining and easy to clean, so it even looks good when the electronics are not in your boat.
Features:
360-degree swivel adjustment
Sleek, low profile of the ProMount is only 1 1/8 inches high
Fits nearly all Lowrance, Garmin, Eagle, Hummingbird, and Vexilar electronics
Made of tough ABS plastic
Stainless steel mounting screws
One year warranty
Made in the USA
Specifications:
Outside Dimensions: 3.45" x 4.75"
Mounting Hole Spacing: 2.3" x 3.7"
Mounting Hole Size: 1/4"
Supports weights up to 3 pounds
One year warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.80 |
|
|
1" Ball Marine Electronic Base f/Humminbird & Lowrance
The RAM-B-107BU is a marine grade aluminum base with 1" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. The RAM-B-107BU is a "light use" base, designed to hold small marine electronic devices.
Weight:
0.35 lbs.
Compatible Devices:
Humminbird 700 Series
Humminbird 500 Series
Humminbird 300 Series
Humminbird 100 Series
Humminbird Matrix Series (excluding Matrix 97)
Lowrance Elite-5
Lowrance Elite-5M
Lowrance Elite-5X
|
18.47 |
|
|
RAM Track Ball™ Mount with Marine Electronic Plate for the Eagle Cuda, FishEasy, Humminbird Piranha & Lowrance X-4
The RAP-B-107-1B-354-TRA1U consists of a Track Ball™ base, composite double socket arm and connecting Humminbird/Eagle/Lowrance marine base. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm - allowing for high adjustability to achieve perfect viewing angles. This kit is compatible with virtually any track system including the RAM Tough-Track™.
Ball Size:
1" Rubber "B" Ball Size
Material:
High Strength Composite
Note:
Part number reflects product packaged in a poly bag.
|
31.01 |
|