Delrin Mounting Pin for 101 & 102 Actuator (1.5") - Pack of 2. Specifications Lenco Part #: 15087-001 (Pack of Two) System Type: Single or Dual Actuator Compatibility: Any Boat WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Additional Wall Plate f/ARM101 An additional wall plate for the ARM101 so you can move the TV & ARM to a different location! This wall/base plate is designed for the ARM101 so you can move the TV & ARM to a different location! Note: It is recommended to remove the TV from the arm during off-road transit.

SI-TEX 492/50/200ST Transom Mount Transducer f/ES502 Dual Frequency 50/200 kHz Max Power: 500W Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz Housing: Plastic Mount: Transom Plug: 8 Cable: 30' Temp: Yes Speed: Yes For SI-TEX model: ES502

Front Mounted Fairlead f/Small T-Cleat & C-Cleat Features: Easily fitted to the 'T-Cleat' and 'C-Cleat'. Allows precise cleating and release from any lead angle. Lower entry efforts for off-centre cleating. Will not catch lines or clothing. Suits small C-Cleat and T-Cleat Tough, abrasion resistant composite material

Flush Mount Kit f/VHF Radios & Small Displays White powder coated stainless steel.

CPT-DV Trandsom Mount Transducer f/Dragonfly 4 & 5 The CPT-DV should be used with the new Dragonfly 4DV and WiFish. Features Depth and temperature CPT-DV cable length is 4m (13.1 ft.)

Flat Mount Bracket f/StructureScan 3D Ducer & TotalScan Ducer 3D Transducer Flush Mount Bracket is used to flush mount the transducer under the boats Hull. Suits TotalScan and 3D Transom Transducers

Hanging Mount System f/Standard Echomaster Use the hanging mount system to suspend your Echomaster unit from a mast or rigging in the perfect "catch rain" position.

Mounting Bracket f/GO9 & Vulcan 9; NSS7 and ZEUS7 Gimbal mounting bracket for Simrad GO9 & B&G Vulcan 9; NSS7 and ZEUS7

ROKK Mini Pro Mount Kit f/Lowrance HOOK2 and Simrad Cruise - Kayak Track Mount The ROKK mini HOOK² mount was designed alongside Lowrance’s product design team, ensuring the perfect fit for the HOOK2 4x, 4x GPS, 5x, 5 models, the world’s easiest fish finder range.  The 360° rugged marine grade mount enhances your fishing experience; you can mount, adjust and lock your HOOK² to the optimum position allowing you to spend more time fishing and less time re-adjusting.  When you're done fishing for the day, simply release the HOOK² and ROKK mini mount from its base with the quick release button to take home with your catch. The HOOK² clamp is compatible with the ROKK mini body and all 6 ROKK mini bases. Compatible With: Lowrance HOOK2 4x, 4x GPS, 5, 5x Lowrance HOOK Reveal 5" Simrad Cruise 5 Features: Engineered to withstand high shock loading. Secure mount for smart phones, handheld GPS and other small devices. Base secures with included hardware. In the Box: RL-521 ROKK Mini Quick Release Adapter for Lowrance HOOK & Simrad Crusie Displays  RLS-407 ROKK Mini Kayak Track Mount  RLS-AM ROKK Mini Adjustable Arm *Sold as a Kit

Bronze Clam Shell Style Hull Strainer w/Mount Ring f/Up To 1" Thru Hull  Features: Mount ring design allows easy access to Thru Hulls. C84400 bronze body and door. Cast filter slots. Pressure relief holes in door casting. Specifications: Flow Type: STD Mount Ring Incl.: YES Max T-Hull: 1" Perf Dia.: Cast Slots

101 Actuator- 12 Volt- 2-1/4  Stroke with Mounting Hardware The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches.  Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

101 XD Actuator- 12 Volt- 2-1/4  Stroke with Mounting Hardware The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches.   Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 5/16" upper and 3/8" lower mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

101XDS Short Extreme Duty Actuator - 12V - 2-1/4" Stroke with Mounting Hardware The 101 XDS Actuator is used with OEM specific kits and limited space applications. It is the shortest actuator manufactured. 2.25 stroke and overal length (tip to tip) is 10 7/8 inches.    Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

101XDS Short Extreme Duty Actuator - 12V - 2-1/4" Stroke with Mounting Hardware The 101 XDS Actuator is used with OEM specific kits and limited space applications. It is the shortest actuator manufactured. 2.25 stroke and overal length (tip to tip) is 10 7/8 inches.    Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 24 Volt 3/8" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.