MB-8 R-A-M 1-1/2" ball mount bracket with long arm and mounting plate. Works with: FishMark 160, FishMark 240, GlobalMap 1000, GlobalMap 2000, GlobalMap 2400, GlobalMap 3000, GlobalMap 4000M, GlobalMap 5000C, GlobalMap 6000C, GlobalMap 7000C, GlobalNav II, GlobalNav IIA, LCX-104C, LCX-111C HD, LCX-113C HD, LCX-15CI, LCX-15CT, LCX-15MT, LCX-16CI, LCX-17M, LCX-18C, LCX-19C, LCX-20C, LCX-25C, LCX-26C HD, LCX-27C, LCX-28C HD, LCX-37C, LCX-38C HD, LMS-240, LMS-350, LMS-350A, X-70, X-70A, X-71, X-91

MB-7 R-A-M 1" ball mount bracket with arm and mounting plate. Works with: Accura 240, Cuda 168 EX, FishEasy 2, FishElite 320, FishElite 480, FishElite 500C, FishElite 502C iGPS, FishElite 640C, FishElite 642C iGPS, FishMark 160, FishMark 240, FishMark 320, FishMark 480, FishMark 500C, FishMark 640C, GlobalMap 2400, GlobalMap 2400, GlobalMap 3200, GlobalMap 3300C, GlobalMap 3500C, GlobalMap 4800, IntelliMap 320, IntelliMap 480, IntelliMap 500C, IntelliMap 502C iGPS, IntelliMap 642C iGPS, Journey, LMS-240, LMS-320, LMS-330C, LMS-332C, LMS-334C iGPS, LMS-335C DF, LMS-337C DF, LMS-339C DF iGPS, LMS-480, SeaCharter 320DF, SeaCharter 480DF, SeaCharter 500C DF, SeaCharter 502C DF iGPS, SeaCharter 640C DF, SeaCharter 642C DF iGPS, SeaFinder 240DF, SeaFinder 320DF, Status, Trifinder 2, X100C, X102C, X105C DF, X107C DF, X125, X135, X136DF, X51, X58DF, X-71, X87, X88DF, X-91, X97, X98DF

1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern) The RAM-B-111U-C consists of a long double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

1" Diameter Ball Mount w/Short Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern) The RAM-B-111U-A consists of a short double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

Apollo™ 6 & 8 Channel Marine Amplifier Mounting Bracket Use this mounting bracket to easily install your Apollo 6/8 channel marine amplifier.  Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.  Technical Specifications: Dimensions (WxHxD) - 7.87" x 6.08" x .39" In the Box: Mounting bracket Four 8-gauge, self-tapping screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

168 1-1/2" Ball with Low Profile Track Mount Adapt your Scotty low profile track to our 1.5″ ball mounting system. For use with all Scotty 1.5″ ball mounts and Scotty low profile tracks.  Features: 1.5" Ball with Track Adapter

Rail Mount Bracket for Flagpole - Round - 7/8"-1" Round Rail Mount Bracket is for use on 7/8" and 1" tubing. Constructed of corrosion resistant UV stabilized injection molded nylon. Installs with two RH fasteners and nuts (included). Accommodates Sea-Dog® Round Flagpoles (328112-1 and 328114-1). Maximum speed 10 MPH. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

162 1.5" Ball Mount with Gear Head Post & 241 Side Deck Mount The latest edition to Scotty's ball mounting system is the 1.5” ball mount. Features: The bigger ball design gives you a much greater clamping force for larger accessories while still having a smooth full range of motion  Click and lock any Scotty post mount accessory into the Gear Head  Designed for use with Scotty Baitcaster Spinning & Fly Rod Holders Dimensions: Base Mount Dimensions: 2” x 4” Mount Height Stands: 10” Tall

173 2-1/4" Ball Mount for Fishfinder & Chartplotter Features: The Scotty 2.25″ Ball Mount enables anglers to mount larger fish finders on their watercraft It’s designed for 10″-12″ fish finders and offers sturdy and secure holding power Prefabricated holes on the top plate allow easy installation gimbal mount brackets that come with anglers’ fish finders Produced using corrosion proof reinforced nylon

164 1.5" Ball Mount with Sounder Plate The Scotty 164 provides a mounting receptacle for 5-7″ screens from all major electronics brands. Features: Engineering-grade nylon and Stainless steel construction Easy grip t-knob tightens down for optimal hold strength and simple adjustments Compatible with all 1.5″ Scotty ball mounting system accessories The corrosion-proof construction of this system provides a long service life in both fresh and saltwater applications Dual ball joints provide infinite flexibility for positioning

RAM 1" Diameter Ball Mount w/2 Diamond Bases The RAM-B-102U consists of a double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Mount with Long Arm & 2/Diamond Bases The RAM-B-102U-C consists of a long double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Mount with Short Arm & 2/Diamond Bases The RAM-B-102U-A consists of a short double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Mount with Short, Double Socket Arm, 2.5" Flex Adhesive Base & Diamond Base Adapter The RAP-B-378-A-238U consists of the flex adhesive base with 1" ball, SHORT SIZE double socket arm and and diamond base adapter. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Using a PSA stick pad, put the flex adhesive mount practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your scooter, motorcycle, kayak, boat or vehicle dash is easy. Attaching the patented 1" rubber ball, to one of many RAM arms, creates the ultimate socket system with multiple adjustment points for articulation and perfect viewing angles. Material: High Strength Composite Ball Size 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" Ball Mount with Track Ball™ Base & 2" x 4" Plate for the Humminbird Helix 7 ONLY The RAM-202-24-354-TRA1U consists of a double socket arm mount, Track Ball™ base and 2" x 4" rectangular plate. The unique rubber ball and socket technology dampens shock and vibration while offering high adjustibility to achieve the perfect viewing angle. Compatible with any RAM Tough-Track™ system. Compatible Devices: Humminbird Helix 7 Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in polybag