|
Shoot-Thru-Hull, wide cone angle, 200 kHz "POD" transducer with external temperature sensor.
|
81.02 |
|
|
Shoot Thru-Hull Pod with Remote Temp - 9-Pin
Navico 9-Pin 83/200 kHz shoot-thru or trolling-motor mount Skimmer® with remote temp sensor with blue connector.
|
90.13 |
|
|
PD-WBL
Trolling motor-mount or shoot-thru-hull, pod type transducer.
Works with: LCX-110C, LCX-111C HD, LCX-15CI, LCX-15CT, LCX-15MT, LCX-16CI, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, X102C, X125, X135, X5
|
81.02 |
|
|
Shoot-thru-hull mount, 20 degree pod type with remote temperature (200 kHz). Includes power cable (20 ft. cable).
|
72.79 |
|
|
Groco Th-3000-L Thru Hull 3" Less Nut
Groco- Thru Hull 3" Less Nut
|
247.60 |
|
|
Shoot Thru The Hull Pod - No Temp - 9-Pin
9-Pin 83/200 kHz shoot-thru or trolling-motor mount skimmer depth only
Works with Simrad, Lowrance and B & G Sounder units that have a 9 pin Connector
|
90.13 |
|
|
Kayak Scupper Transducer Mount
Lowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 1-inch 200 kHz transducers.
It's easy to install in most any scupper opening, with few tools, and without messy adhesives as with shoot-thru-hull transducer mountings.
Best of all, the Lowrance Scupper Mount positions the Skimmer transducer, so it's totally submerged in the water you're fishing. That guarantees maximum sonar signal return sensitivity, producing the absolute clearest underwater returns of structure and fish possible.
|
40.96 |
|
|
B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT for Simrad, Lowrance & B & G
The B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull.
Features:
Depth only or depth and temperature
600 W
Dual-frequency element: 50 kHz with a wide 45° beamwidth for performance to 353 m (1,200'), 200 kHz with a 12° beamwidth for performance to 206 m (700')
Right-angle cable exit saves space and protects the transducer if stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Low-profile, bronze housing has minimal drag
Plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials and deadrise angles
Specifications:
Weight: 0.9 kg (2.0 lb.)
Recommended Boat Length: Up to 8 m (25')
Hull Material: Fiberglass or wood
Hull Deadrise: Best performance through 7°. Can accommodate up to 12°.
Acoustic Window: Urethane
Hole Diameter: 51 mm (2")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
288.35 |
|
|
SS75 High Chirp 12 Degree Bronze Thru-Hull xSonic Transducer
Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats, such as center consoles. The high-frequency band has a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. High frequency also shows amazing target separation on baitfish and schooling gamefish. The SS75H transducer, operating at 130 to 210 kHz, delivers up to 80 kHz of total bandwidth in just one installation for outstanding bottom detail and fish-target resolution.
This Tilted Element™ transducer has the element fixed at a 12-degree angle within the housing. Because the transducer is installed almost flush with the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.
Features:
Depth and fast-response water-temperature sensing
600 W of power with a maximum depth of 214 m (700')
High frequency (130 to 210 kHz)
15- 9 degree beamwidth
High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns
Low-profile, thru-hull housing provides good display resolution at speed when installed properly
Recommended for stepped, planning, or displacement hull
Stainless steel housing for use in all hull materials
Patented Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 10 m (33')
Common Use: Fishing, Commercial Fishing
Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin
Country of Origin: USA
Cross Reference: 000-13912-001
Deadrise Range: 8-15 degrees
Display Connector: 9N
Frequency Band: High
Functions: Depth, Temperature
High Frequency: 130-210 kHz
High Frequency Beamwidth: 15-9 degrees
Hole Size: Fiberglass or wood hull—70 mm or 2-13/16", Metal hull—79 mm or 3-1/8"
Hull Material: Compatible w/ all hull materials
Material: Stainless Steel
Max Deadrise: Up to 24 degrees
Max Deadrise Angle: 24 degrees
Max Depth: 214 m (700')
Max Vessel LOA: Up to 8 m (26')
Mix and Match Series: 12-Pin Chirp
Mounting Style: Tilted Element Thru-Hull
Power Rating: 600 W
Retractable housing: No
Sensor Connector: MMC
Single or Dual Frequency: CHIRP-Ready Single-Band
Tilt Angle: 12 degrees
Tilted Element: Yes
Weight: 1.4 kg (3 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
861.48 |
|
|
B164 1kW 0° Thru-Hull Transducer with Blue Connector
The B164 is a 1kW bronze low-profile transducer with a fast-response temperature sensor. The transducer is ideal for fast, trailered, tournament, sport-fishing boats that cannot install an external fairing. This version has a zero degree tilt for hull deadrise angles of 0-7 degrees.
The BL (Blue Connector) version of the B164 transducer is for Lowrance fishfinders and sounders that use the standard Lowrance 7-pin blue connector. This includes the Lowrance HDS series and many other current and discontinued Lowrance units. The B164 BL version is also for the Simrad NSE series.
Features:
Power output 1000W
3.875" hole size (98mm)
Beam 22 x 20° at 50kHz, 6 x 6° at 200kHz
Maximum depth 1200-1800 ft @ 50kHz
Maximum depth 500-800 ft @ 200kHz
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1140.00 |
|
|
B45 Bronze Thru-Hull with Fairing Block - 50/200 kHz - 600W - 9-Pin Connector (xSonic)
The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a single, 50/200 kHz ceramic element. The included fairing streamlines the transducer and increases the performance—even at higher speeds.
Features
The depth and fast-response water-temperature sensing
600 W of power
Dual-frequency element:
50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200')
200 kHz with a 12° beamwidth for depth performance to 206 m (700')
Excellent performance and sensitivity in a small housing
Bronze housing with High-performance Fairing for optimal performance at speed
Specifications
Acoustic Window: Urethane
Cable-Length: 10 m (33')
Common Use: Cruising/Racing Sailboats, Leisure/Yachting, Fishing
Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin
Conventional Beam: 45°/12°
Country of Origin: USA
Cross Reference: 000-13946-001
Deadrise Range: Up to 28° with fairing
Display Connector: 9N
Frequency Band: 50/200 kHz
Hole Size: 22 mm (7/8")
Housing Material: Bronze
Hull Material: Fiberglass or wood
Max Deadrise: Up to 26° with fairing
Max Deadrise Angle: 26°
Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700')
Max Vessel LOA: Up to 9 m (30')
Mix and Match Series: 5-Pin 600 Watt
Mounting Style: Thru-Hull with Fairing
Power Rating: 600 W
Sensor Connector: MM
Single or Dual Frequency: Conventional Dual Frequency
Tilted Element: No
Transducer Functions: Depth, Temperature
Usable Shaft Length: 92 mm (3.62")
Weight: 2.5 kg (5.5 lb.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
B75H 20° Bronze Thru-Hull CHIRP xSonic 9-Pin
The B75H is a bronze, thru-hull, tilted, high-frequency (130-210kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.
Features:
CHIRP transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures
Depth/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings
Easy To Install
High Frequency - CHIRP range is 130kHz-210kHz for good target detail in shallow water and excellent bottom tracking in deep water
Highly Accurate - Provides extremely accurate data
20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise
Low Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull
Plug & Play Connection - Easily connect to NSS, NSE, NSO or Lowrance
|
658.62 |
|
|
B260 Bronze Thru Hull
The B260 will enhance fish detection on virtually all of today's
fish finders. High-performance has been redefined with its
Broadband Ceramic Technology. The narrow, 6 degree beam 200 kHz
ceramic will give you excellent resolution and crisp image detail
needed for bottom fishing. The B260's low ringing is perfect for
finding fish holding tight to the bottom and other structure.
The seven-element 50 kHz array has a wider 19 degree beam for
deeper blue-water fishing. The outcome at both frequencies
is excellent resolution and crisp image detail where it's needed
most.
Compatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display Units.
Features
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze Thru Hull
7 pin blue connector
Includes High Speed Fairing Block
|
1528.94 |
|
|
TotalScan Thru Hull Single Fairing Block
Replacement fairing block for TotalScan thru hull transducers. Fits both TotalScan M/H and TotalScan L/H thru hull transducers.
|
99.23 |
|
|
xSonic SS175H-W/12 Stainless Steel Thru-Hull Transducer - 12° - 9-Pin
The SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8M (25') in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths.
Features:
130-210 kHz High CHIRP with wide 25° beam for excellent fish targets
Up to 310M (1000') range with High CHIRP
1 internal broadband ceramic
Thru-hull with stainless steel housing
Suitable for fiberglass and wood hulls
Ideal for sportfishing and commercial vessels up to 8M (25')
Recommended for use with Simrad NSSevo3 Lowrance HDS Gen3 multifunction displays
|
1458.80 |
|