Pico C4-MAX Expansion Module Pico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories, and devices that do not have the sophisticated PLI technology built-in. The Pico C4 Module provides Poco or TTP control of third-party RGB or RGBW lighting accessories. This means that everything from strip lighting to lighted speakers can be controlled through the Poco system. On vessels not equipped with the Poco system, the Pico C4-MAX provides control of color and intensity through any normal on/off switch, using Lumitec’s field-proven TTP protocol.  Specifications: CE Certified: Yes Depth: 0.88 in (2.23cm) Finish / Housing: White Height: 3.5 in (8.89cm) IP Rating: 67 Max Amp/ch: 10A Number of Channels: N/A Op. Temp F/C: -31/35 to + 131/55 PLI Enabled: Yes Sub Category: Pico Expansion Modules Timed Toggled Protocol (TTP): Yes UL Certified: No Voltage: 10vDC-30vDC Width: 3.1 in (7.87cm)

Pico S-8 Expansion Module Pico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in. The Pico S8 module provides the ability to assign Poco virtual switch commands to physical mechanical switches (8 max). This means that your MFD can remain on a dedicated screen, or even be turned off, and a physical switch will activate the virtual switch command through the Poco module. Requires Poco 3 for compatibility (S8 module is not compatible with all earlier versions of the Poco module).

Pico C-4 Expansion Module Pico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in. The Pico C-4 module provides Poco or TTP control of third party RGB or RGBW lighting accessories. The Pico P-1 module acts as an in-line solid-state relay, controlling any large load up to 20 Amps with on/off and PWM dimming control. 

Pico OHM Expansion Module The Pico OHM modules make it easy to connect 4-wire RGB accessories to a standard 2-wire DC electrical system and control the color output through a Poco Digital Controller. Features: Connect RGB accessories to a standard 2-Wire DC electrical system 4 Modules in the pack RGB only (no RGBW) 12VDC ONLY (0.4A max current draw) No TTP (Timed Toggle Protocol) Lumitec Digital Controller (POCO) is required to control Pico OHM

Newbury, Massachusetts, April 15th, 2010: Technology changes rapidly and as a company building WiFi equipment, Island Consulting strives to offer the best. Since the beginning, Island Consulting has continuously made improvements to The Wirie, a long range WiFi solution for boats and RVs. The most recent development in creating a better product involves a high-end marine grade WiFi antenna. To achieve this goal, Island Consulting partnered with the well-known US antenna manufacturer, L-com.   L-com, a leading antenna manufacturer in the wireless connectivity business for over 27 years, agreed to produce a marine grade antenna exclusively for The Wirie. Designed to stringent specifications, the new Wirie antenna is an 8dBi omni-directional high performance marine antenna that features sealed collinear brass elements inside a durable UV-stable white fiberglass radome. The sealed end cap ensures no water entry and drain holes in the base help prevent moisture build-up inside the antenna.   The collaboration between Island Consulting and L-com offers the consumer an economical alternative to other true marine grade WiFi devices currently on the market.  “We believe our partnership with L-com has allowed us to turn The Wirie into the most durable and best long range WiFi solution available for boats and RVs”, states Mark Kilty from Island Consulting.  According to Karl Blomgren, L-Com's Product Manager, “L-Com is always interested in working with customers, like Island Consulting, to optimize our antennas for their applications to support new product enhancements.” Additional information about The Wirie's new antenna can be viewed at www.thewirie.com/antennadetails.html.   For $250, The Wirie enhances the customers' ability to connect to the internet from the comfort of his/her own boat or RV. The Wirie continues to offer many unique features: flexible stainless steel mounting bracket, easy to install and use software, comprehensive user manual, powerful 1000mW WiFi adapter, IP67 waterproof box, and superior customer support. The Wirie is easy to upgrade as technology continues to advance. In addition to the new antenna, the warranty of The Wirie has been extended to 1 year. The 10-day money back guarantee is still in place. Through the joint effort between Island Consulting and L-com, The Wirie is a truly marine grade WiFi solution at an affordable price. For more information, please visit www.thewirie.com.   About The Wirie: Island Consulting located in Newbury, Massachusetts, USA, manufactures and distributes The Wirie.  The Wirie was invented in the Caribbean in April 2009 to provide a cost-effective, user-friendly, long range WiFi solution for boats and RVs. It was quickly expanded to a U.S. operation to allow a larger distribution.  Island Consulting is committed to continuous improvements and to making sure every customer is extremely satisfied. Website: www.thewirie.com   About L-com: Founded in 1982, L-com Global Connectivity is a privately held corporation in Massachusetts, USA, dedicated to the design and production of a wide range of interconnect products for the electronics and data communication industries. L-com places primary product emphasis on copper and fiber cable assemblies, wireless antennas and amplifiers and accessories for modular, coaxial and computer networking applications. In June 2007, L-com acquired HyperLink Technologies of Boca Raton, Florida, USA. Website: www.L-com.com   Contact: Liesbet Collaert liesbet@thewirie.com  http://www.thewirie.com   The Wirie can now be found at CLR Marine.   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FAntennas   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FMobile%20Broadband   http://www.clrmarine.com/m4_view_item.html?m4:item=0Wirie    

Sta-Rite SNC-L Shallow Well Jet Pump 1/2HP 1/2 HP - 115/230 Volt - Shallow Well Jet Pump The ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25 feet deep. Self-priming after the priming chamber has been filled with water. APPLICATIONS Water systems and sprinkling   FEATURES Quality Construction Close grained cast iron body. Drain port provided for easy winterizing. Built-in Jet High strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service. Noryl Impeller Precision-molded for perfect balance ultra-smooth for highest performance and efficiency. Precision Molded Diffuser Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser. Mechanical Shaft Seal Precision lapped and highly polished carbonceramic, stainless steel construction. Internal design guarantees continuous water lubrication. Motor Windings Superior insulation materials protect against excessive moisture and contaminants assure prolonged motor life. Balanced Rotor Die cast under high pressures for uniform performance and greater efficiency, dynamically balanced. Heavy-duty Ball Bearings Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation. Pump and Motor Shaft Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment. Dustproof Cover All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components. Pressure Switch Professional quality, allows cut-in adjustments. SPECIFICATIONS Max. Liquid Temperature: 140°F Max. Inlet Pressure: 50 PSI

Gianneschi MAXI SUB Bilge Pump 230/50 Submersible Bilge Pump for seawater and grey water.   Maxi Sub   230v 50 Hz - 0,18 kW Max flow: 180 L/min @ 2 m Max head: 8 m @ 30 L/min Outlet: 1", female (vertical) Stainless steel shaft (AISI 316) ; ABS open impeller Diameter: 230 mm Height: 350 mm IP rating : IP68

Gianneschi MAXI SUB 24V Submersible Pump 24V Submersible Bilge Pump for seawater and grey water   Maxi Sub - 24volt   Voltage: 24 V Power: 0,18 kW Max flow: 180 L/min @ 2 m Max head: 8m @ 30 L/min Outlet: 1", female (vertical) Stainless steel shaft (AISI 316) ; ABS open impeller Diameter: 180 mm Height: 290 mm IP rating : IP68

Yamada NDP-25BPS-T1-L-BSPT 1" Poly Santo Diaph Pump Yamada NDP-25BPS-T1-L-BSPT-PP Double Diaphragm Pump, 46.2 gpm, 1" FNPT Inlet x 1" FNPT Outlet Yamada 46.2 gpm double diaphragm pump having 1" FNPT inlet size and 1" FNPT outlet size features 20 - 100 psi maximum pressure and 180 deg F temperature rating. Yamada NDP-25 series air powered double diaphragm (AODD) pumps provide a maximum flow rate of 46.2 gallons per minute. Pumps are available in aluminum, stainless steel (316), cast iron, polypropylene, and Kynar construction, with a wide variety of diaphragm materials.

Yamada NDP-25BPS-T1-L-BSPT-PP 1" Santo Epdm Diaph Pump Yamada NDP-25BPS-T1-L-BSPT-PP Double Diaphragm Pump, 46.2 gpm, 1" FNPT Inlet x 1" FNPT Outlet Yamada 46.2 gpm double diaphragm pump having 1" FNPT inlet size and 1" FNPT outlet size features 20 - 100 psi maximum pressure and 180 deg F temperature rating Yamada NDP-25 series air powered double diaphragm (AODD) pumps provide a maximum flow rate of 46.2 gallons per minute. Pumps are available in aluminum, stainless steel (316), cast iron, polypropylene, and Kynar construction, with a wide variety of diaphragm materials.  

Sta-Rite HLE-L Convertible Jet Pump 1HP Sta-Rite- Convertible Jet Pump, Cast Iron Construction, 1HP 115V Only Motor, 1-1/4" Suction Port, 1" Drive and Discharge Ports, 30/50PSI Pressure Switch, up to 26.8GPM with shallow well, Maximum 25 Feet of Lift Shallow Well, 120 Feet Deep Well, Requires Jet Package for Operation

Groco Th-3000-L Thru Hull 3" Less Nut  Groco- Thru Hull 3" Less Nut

Sherwood L-10B PUMP ONAN FITS MDL 6    

Major Rebuild Kit for Sherwood L-10B This kit contains the following items      MS DATA SHEET 1 DATA SHEET SH 10515C 1 SCREW & WASHER SH 10615K 1 IMPELLER KIT SH 10929 1 CAM SH 12211 2 BALL BEARING SH 12231 1 O'RING SH 12710 3 LOCKWASHER SH 12857 3 SCREW SH 12859 1 SEAL/SEAT ASSEMBLY SH 13795 1 HUB SH 25150 1 WEAR PLATE SH 4258 3 SNAP RING (SMALL) SH 4259 2 SNAP RING (LARGE) SH 4264 1 WASHER SH 4432 1 KEY SH 5133 1 SPACER   Kits are put together at time of order

Minor Repair Kit for Sherwood L-10B This kit contains the following items   SH 10615K 1 IMPELLER KIT SH 12859 1 SEAL/SEAT ASSEMBLY     Kits are put together at time of order