Size 54 Medium Profile Hatch Ideal as a foredeck hatch on larger offshore yachts, the Medium Profile has thicker acrylic and deeper frame sections for greater strength and durability. It features Lewmar’s unique sealing system, allowing for easy acrylic replacement. All while retaining the smooth, modern lines of the low-profile hatch. Features: Outside handles allow the hatch to be opened from the deck if it is not locked Friction levers hold the lid open in any position up to 95° Anodized aluminum frame for corrosion resistance Curved upper frame profile for strength as well as modern styling A full range of spare parts is available Specifications:  Lower Frame: 9/16 in. Acrylic Color: Smoke Grey Hatch Weight: 14.3 lb. Acrylic Window Thickness: 1/2 in. Length: 18-1/4 in. Width: 22-3/4 in.    Height: 1-1/4"    Radii R: 2-7/8 in.    Cut-Out Length: 15-7/16 in. Cut-Out Width: 19-15/16 in. Cut-Out Radii R1: 1-11/16 in.

Size 44 Low Profile Hatch Seal Kit Replacement seals for the Low Profile hatch range. Works by holding the Acrylic pane into the frame. In the Box: Gasket Instruction manual *Sold as an Individual 

Size 10 Low Profile Deck Hatch The Low Profile Hatch has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid-size yachts. Features: Outside handles allow the hatch to be opened from on deck if it is not locked (Sizes 00, 03,10, 20 & 41 have no outside handle and can only be opened from the inside.) Low profile hatches open up to 180° (round hatches open to 170°) Friction levers hold the lid open in any position up to 95° Anodized aluminum frame for corrosion resistance Curved upper frame profile for strength as well as modern styling Technical Specifications: Support System - Self-supporting Color - Smoke Grey Weight - 4.9lbs Dimensions (L x W x H) - 13" x 13" x 1" Cut-Out Dimensions (L x W) - 10.25" x 10.25" *Sold as an Individual 

White Trim Ring & Screen Kit Trim kits offer an easy and attractive approach to complete the installation of a hatch inside the cabin. The kits, which are manufactured of ABS plastic, include a trim piece and a hinged (and detachable) flyscreen to keep mosquitoes and other pesky insects out of the boat. The hatch latches may be accessed easily thanks to the hinged screen. Features: White trim ring and screen kit for Lewmar hatch size 54 Can only be fitted to boats with a headliner The trim flange can be cut to length to suit a range of deck thicknesses up to 2-7/16 in. for low/medium profile hatches, and 2-13/16 in. for flanged ocean hatches Can't be used on flat base ocean hatches

Newbury, Massachusetts, April 15th, 2010: Technology changes rapidly and as a company building WiFi equipment, Island Consulting strives to offer the best. Since the beginning, Island Consulting has continuously made improvements to The Wirie, a long range WiFi solution for boats and RVs. The most recent development in creating a better product involves a high-end marine grade WiFi antenna. To achieve this goal, Island Consulting partnered with the well-known US antenna manufacturer, L-com.   L-com, a leading antenna manufacturer in the wireless connectivity business for over 27 years, agreed to produce a marine grade antenna exclusively for The Wirie. Designed to stringent specifications, the new Wirie antenna is an 8dBi omni-directional high performance marine antenna that features sealed collinear brass elements inside a durable UV-stable white fiberglass radome. The sealed end cap ensures no water entry and drain holes in the base help prevent moisture build-up inside the antenna.   The collaboration between Island Consulting and L-com offers the consumer an economical alternative to other true marine grade WiFi devices currently on the market.  “We believe our partnership with L-com has allowed us to turn The Wirie into the most durable and best long range WiFi solution available for boats and RVs”, states Mark Kilty from Island Consulting.  According to Karl Blomgren, L-Com's Product Manager, “L-Com is always interested in working with customers, like Island Consulting, to optimize our antennas for their applications to support new product enhancements.” Additional information about The Wirie's new antenna can be viewed at www.thewirie.com/antennadetails.html.   For $250, The Wirie enhances the customers' ability to connect to the internet from the comfort of his/her own boat or RV. The Wirie continues to offer many unique features: flexible stainless steel mounting bracket, easy to install and use software, comprehensive user manual, powerful 1000mW WiFi adapter, IP67 waterproof box, and superior customer support. The Wirie is easy to upgrade as technology continues to advance. In addition to the new antenna, the warranty of The Wirie has been extended to 1 year. The 10-day money back guarantee is still in place. Through the joint effort between Island Consulting and L-com, The Wirie is a truly marine grade WiFi solution at an affordable price. For more information, please visit www.thewirie.com.   About The Wirie: Island Consulting located in Newbury, Massachusetts, USA, manufactures and distributes The Wirie.  The Wirie was invented in the Caribbean in April 2009 to provide a cost-effective, user-friendly, long range WiFi solution for boats and RVs. It was quickly expanded to a U.S. operation to allow a larger distribution.  Island Consulting is committed to continuous improvements and to making sure every customer is extremely satisfied. Website: www.thewirie.com   About L-com: Founded in 1982, L-com Global Connectivity is a privately held corporation in Massachusetts, USA, dedicated to the design and production of a wide range of interconnect products for the electronics and data communication industries. L-com places primary product emphasis on copper and fiber cable assemblies, wireless antennas and amplifiers and accessories for modular, coaxial and computer networking applications. In June 2007, L-com acquired HyperLink Technologies of Boca Raton, Florida, USA. Website: www.L-com.com   Contact: Liesbet Collaert liesbet@thewirie.com  http://www.thewirie.com   The Wirie can now be found at CLR Marine.   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FAntennas   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FMobile%20Broadband   http://www.clrmarine.com/m4_view_item.html?m4:item=0Wirie    

Size 70 Flush 2G Deck Hatch Lewmar pioneered the high-volume flush hatch platform back in 2006, bringing what was then Superyacht styling into mainstream boat production.  The precision of the fit makes for a sleek, modern look and means no more stubbed toes for boat owners. Features: Clean aesthetics EPDM seal provide completely watertight structure Water drained effortlessly away by deck-moulded channels Strong, stylish handles and hinges Trimkit fits all standard sizes  Dark grey acrylic option keeps cabin cooler Technical Specifications: Support System - Stay x two (2) Color - Dark Sport Tint Dimensions (L x W x H) - 25.5" x 27.5" x 1.25" Cut-Out Dimensions (L x W) - 24.7" x 24.7" *Sold as an Individual 

Size 60 Ocean Hatch - Flange Base With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Features: Friction levers hold the lid open in any position up to 95° Anodized aluminum frame for corrosion resistance All sizes suitable for CE Area 2 (Deck, Coach roof, Cockpit, and Transom) Technical Specifications: Support System - Friction Lever Color - Smoke Grey Window Thickness - .5" Weight - 17.6lbs Dimensions (L x W x H) - 22-5/8" x 22-5/8" x 1-11/16" Cut-Out Dimensions (L x W) - 19-15/16" x 19-15/16" *Sold as an Individual

MAGNUS Escape Hatch - OD 22-3/16" x 22-3/16" Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are current in the market. Features: External Dimensions -  22 3/16" x 22 3/16" Cut Out Dimensions - 19 15/16" x 19 15/16" Number of Handles - 4 *VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MAGNUS Ventilation Hatch - OD 12-5/16" x 12-5/16" Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are currently in the market. Features: External Dimensions -  12 5/16"" x 12 5/16" Cut Out Dimensions - 10 1/4" x 10 1/4" Number of Handles - 1 *VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MAGNUS Escape Hatch - OD 26-3/4" x 26-3/4" Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are currently in the market. Features: External Dimensions -  26 3/4" x 26 3/4" Cut Out Dimensions - 24 11/16" x 24 11/16" Number of Handles - 4  *VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Flush Pull Latch - 316 Stainless Steel - No Restriction - Low Profile - Medium Specifications: Material: 316 Stainless Steel Finish: Electropolished Access Restriction: No Restriction Grip Range: 25.000-26.000 mm (0.98-1.02 in) Panel Thickness: 7.000-12.000 mm (0.28-0.47 in) Profile: Low Profile Size Series: Medium Size Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

X-Grip® Large Phone Mount with Low-Profile Medium Tough-Claw™ The RAM® X-Grip® Large Phone Mount with Low-Profile RAM® Tough-Claw™ consists of the medium RAM® Tough-Claw™ base and the universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter. This kit is compatible with handheld devices that fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size. Features: Low-profile phone mount clamps to your handlebar with the turn of a single knob includes a medium version of the RAM® Tough-Claw™ base, designed to clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter; rubber pads provide stable gripping and protection of the mounting surface The spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; Includes optional device tether for peace of mind during rugged use; Check the compatibility section below to see if your phone will fit Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether and (1) Glue Tube for Rubber Caps Hole Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max Clamp Range (inch): 1" - 1.6" diameter Materials: High-strength composite and stainless steel Weight: 0.78 lb. Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Cat: S42, S62, and S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, and Pixel 7 Pro HTC: Bolt and U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture Magellan: TR5 and TR7 Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3 Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium

X-Grip® Phone Mount with Low-Profile Medium Tough-Claw™ The RAM® X-Grip® Phone Mount with Low-Profile RAM® Tough-Claw™ consists of the medium RAM® Tough-Claw™ base and the universal RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® to round, square, and odd-shaped rails and bars ranging from 1 in. to 1.6 in. in outer diameter. This kit is compatible with handheld devices that fit the dimensions listed below. It is important to verify the dimensions of the handheld device with its case, sleeve, or skin when determining the overall size. Features: Low-profile phone mounts clamp to the handlebar with the turn of a single knob Includes a medium version of the RAM® Tough-Claw™ base, designed to clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter; rubber pads provide stable gripping and protection of the mounting surface Spring-loaded 'X' design for phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use; Check the compatibility section below to see if your phone will fit Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether and (1) Glue Tube for Rubber Caps Hole Dimensions: Width Range: 1.85" - 3.25", Depth Range: .875" max Clamp Range (inch): 1" - 1.6" diameter Materials: High-strength composite and stainless steel Weight: 0.48 lb. Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max Blackberry: DTEK 50, DTEK 60, and KEYone Garmin: Approach G8, Edge 1030, and Edge Explore 1000 Google: Pixel, Pixel XL, Pixel 2, Pixel 3, Pixel 3a, Pixel 4, Pixel 4 XL, Pixel 4a, Pixel 5, Pixel 6, Pixel 6 Pro, and Pixel 7 HTC: U11 and U11 life Huawei: Mate 20 Pro and P30 Pro LG: Aristo, Aristo 2, Exalt LTE, G5, G5 Silver, G6, G6+, G7 ThinQ, G8 ThinQ, Grace LTE, K20, K20 Plus, K20 V, K3, K3 2017, K8 2017, Phoenix 3, Q6, Rebel 2 LTE, Rebel 3 LTE, Risio 2, Tribute Dynasty, Tribute HD, V30, V35 ThinQ, V40 ThinQ, Wine LTE, and Zone 4 Motorola: moto e4, moto g5s plus, moto g6, moto g7 power, moto X2, moto X4, and razr Nokia: 1, 2, 3, 5, 6, 8, 9 PureView, 216, 230, 150 Dual SIM, 3310 Dual SIM, 7 plus, 8 Sirocco, and 8110 4G OnePlus: 6T, 7, 7T, 7T Pro, and 7 Pro Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A3, Galaxy A3 (2016), Galaxy A3 (2017), Galaxy A5, Galaxy A5 (2016), Galaxy A5 (2017), Galaxy A6, Galaxy A6+, Galaxy A7 (2016), Galaxy A8+, Galaxy A8 (2018), Galaxy A8+ (2018), Galaxy A10, Galaxy A10e, Galaxy A10s, Galaxy A11, Galaxy A20, Galaxy A20e, Galaxy A30, Galaxy A40, Galaxy A50, Galaxy A50s, Galaxy AMP 2, Galaxy AMP Prime, Galaxy AMP Prime 2, Galaxy C5, Galaxy E5, Galaxy Express 3, Galaxy Express Prime 2, Galaxy Grand Max, Galaxy J1, Galaxy J1 (2016), Galaxy J2, Galaxy J2 (2016), Galaxy J2 (2017), Galaxy J3 (2016), Galaxy J3 (2017) International, Galaxy J3 Emerge, Galaxy J3 Prime, Galaxy J3 V, Galaxy J5, Galaxy J5 (2016), Galaxy J5 (2017), Galaxy J7 (2016), Galaxy J7 (2017), Galaxy J7 Perx, Galaxy J7 Prime, Galaxy J7 Prime 2, Galaxy Luna, Galaxy Note 8, Galaxy Note Fan Edition, Galaxy Note 10, Galaxy Note20, Galaxy On NXT, Galaxy On5, Galaxy On7 Prime, Galaxy On8, Galaxy S5, Galaxy S5 Neo, Galaxy S6, Galaxy S6 Active, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8+, Galaxy S9, Galaxy S9+, Galaxy S10, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 FE 5G, Galaxy S20 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S23, Galaxy V Plus, Galaxy XCover 3, Galaxy XCover 4, Galaxy XCover 5, Galaxy Z Fold2, Galaxy Z Fold3, W2017, Z1, Z2, Z3, and Z4 Sony: Xperia L1, Xperia X, Xperia X Compact, Xperia X Performance, Xperia XA, Xperia XA1, Xperia XA1 Plus, Xperia XA2, Xperia XZ, Xperia XZ1, Xperia XZ1 Compact, Xperia XZ2, Xperia XZ2 Compact, Xperia XZ3, Xperia XZs, Xperia Z3, Xperia Z3+, Xperia Z5, and Xperia Z5 Compact Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 9 Pro, Axon 10 Pro

Size 0 Ocean Traveler Kit - 2:1 Purchase System Lewmar makes selecting your mainsheet system simple - with complete Mainsheet System Kits. Lewmar's Size 0 Ocean Mainsheet System is a complete kit made specifically for yachts up to 28 feet (8.5m.) Features: Smooth, clean profile with no visible fasteners Fast, functional, and attractive Easy to retro-fit new track to the deck using original bolt holes Technical Specifications: Designed for boats up to 28 feet (8.5m) long Safe working load - 990 lbs (400kg ) Max Mainsail Area (End Boom) - 16 m² Max Mainsail Area (Mid Boom)- 12 m² Provides a 2:1 Purchase system In the Box: 29030100BK 1 x Mainsheet car  29170040BK 2 x Simple end stop  29160112 1 x 1.2m Sliding bolt track  29171010 1 x Size 1 Dead eye  29104100BK 2 x Small composite cleat  29904104 2 x Small cam fairlead *Sold as a Kit

Size 1 Ocean Traveler Kit - 4:1 Purchase System Lewmar makes selecting your mainsheet system simple - with complete Mainsheet System Kits. Lewmar's Size 1 Ocean Mainsheet System is a complete kit made specifically for yachts up to 36 feet (11m.) Features: Smooth, clean profile with no visible fasteners Fast, functional, and attractive Easy to retro-fit new track to the deck using original bolt holes Technical Specifications: Designed for boats up to 36 feet (11m) long Safe working load - 1980lbs (900kg ) Max Mainsail Area (End Boom) - 34m² Max Mainsail Area (Mid Boom)- 21m² Provides a 4:1 Purchase system In the Box: 29431916BK 1 x Mainsheet car  29471032BK  2 x Simple end stop  29161115BK  1 x 1.2m Sliding bolt track  *Sold as a Kit