Clamp-On Rail Mount Fits On 1" & 1-1/4" Rails Designed to allow secure mounting of the Navilights with magnetic base to the bow pulpit or stern rail. Examples of Usage: The Clamp-on Rail mount easily attaches to the bow pulpit and can safely hold for example the Navilight Tricolor. In a nearly center position it may be used in its BiColor mode, otherwise it is recommended to use two Clamp-on Rail mounts, each equipped with a Navilight Tricolor showing the green and red light individually. Mounted to the Stern rail it may hold the Navilights TriColor, or the Navi light 360°/Navi light Rescue to show the Sternlight. The Clamp-on Rail mount may also be used on vertical poles - together with the Navi light 360°/ Navi light Rescue it is the perfect solution for the Masthead light. Specifications: Save mounting of Navi lights with magnetic base (Navi light 360° 2NM, Navi light Tricolor 2NM, Navilight Red/Green, Navi light 360° Rescue). Fits on rails from 25 to 32mm (7/8" to 1-1/4") Rotates through 180° Size: L = 97mm, W = 50mm, Diameter = 55mm Weight: 80g

Clamp-On Accessory Fits: 1.315" Pipe Mounts: Horizontal Finish: Silver Heavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.

Sure-Grip Clamp-On Rail Base - Fits Up To 7/8" Diameter This Attwood Sure-Grip Flush Mount can fit a round rail up to 7/8” and is constructed out of extruded aluminum.  Specifications: Base: Clamp-on rail base Fits: Round rail up to 7/8 in. diameter

Navilight Portable Tricolor 2NM with Magnet Base The Navilight Tricolor 2NM - US Coast Guard approved for 2 nautical miles includes a green light to be shown at the starboard side and a red light to be shown at the port side. In addition, it includes the white Sternlight, to be used at the stern. It is battery operated, uses super bright LED light, is water proof, floats and attaches almost anywhere through its double magnetic mounting system. The green as well as the red lights show an unbroken light over an arc of the horizon of 112,5°. The white Sternlight shows an unbroken light over an arc of the horizon of 135°. All lights work independently, in a combination of all three or red/green together. Examples of usage: *Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs On a power-driven vessel of 12M or more in length but less than 50M in length: As green or red sidelight As sternlight On a power-driven vessel of less than 12M in length: as green or red sidelight as combined green / red as sternlight On a sailing vessel underway: as green or red sidelight as sternlight On a sailing vessel of less than 20 meters in lengths as backup light: Tricolor lantern at or near the top of the mast Specifications: USCG Approval, 2 Nautical Miles 5 Modes: Tricolor Masthead light (135° white, 112,5° red, 112,5° green), BiColor side light, red side light, green side light, white Sternlight Floatable, waterproof (20M) and air-tight Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing Powered by three AAA batteries (not included) Size: H = 35mm, Diameter = 68mm Weight (net): 118g Modes / approximate burn time: 16 green / red / white LED, 360° TriColor lantern / 12hrs 10 green / red LED, 225° Bi-Color sidelight / 20hrs 5 green or 5 red LED, 112,5° sidelight / 38hrs 6 white LED, 135° Sternlight / 32hrs Mounting System The double magnetic system consists of the Navilight with its magnetic base, a separate magnetic plate and a screw for attaching the plate to a wooden deck for example. It also holds the light safely on many plastic boats, biminis or any other material by placing the light on top and the magnetic plate underneath. Additionally Navisafe offers a wide range of specially designed magnetic mountings such as the Clamp-on Rail mount, Bendable Suction-mount and the Telescopic Poles that easily allow the lights to be attached.

Navilight All-White 5 Mode 360° Rescue 2NM with Green Magnet Base The Navilight 360° Rescue Edition 2NM - US Coast Guard approved for 2 nautical miles is based on the Navi light 360° 2NM and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. Additionally it is fitted with a glow in the dark circle around the switch. These unique glow pigments glow for 8 hours after only 10 minutes of exposition to daylight. This and the emergency green color of the body, makes Navi light 360° Rescue Edition 2NM extremely easy to locate, day and night. It uses super bright LED light, is water proof, floats and attaches almost anywhere through its double magnetic mounting system. Examples of usage: *Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs In a vessel of 12M or more in length but less than 50M in length: As Sternlight As Flashing light As All-round light In vessels of less than 12M in length: As Masthead light As Sternlight As All-round light Specifications: USCG Approval, 2 Nautical Miles 5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light Floatable, waterproof (20M) and air-tight Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing Powered by three AAA batteries (not included) Size: H = 35mm, Diameter = 68mm Weight (net): 115g Modes / approximate burn time: 16 white LED, 360° All-round light, Anchoring light / 15hrs 16 white LED, 360° Flashing light / 85hrs 10 white LED, 225° Masthead light / 24hrs 6 white LED, 135° Sternlight / 32hrs 4 white LED, 360° Cabin light / 72hrs Mounting: The double magnetic system consists of the Navi light with its magnetic base, a separate magnetic plate and a screw for attaching the plate to a wooden deck for example. It also holds the light safely on many plastic boats, biminis or any other material by placing the light on top and the magnetic plate underneath. Additionally Navisafe offers a wide range of specially designed magnetic mountings such as the Clamp-on Rail mount, Bendable Suction-mount and the Telescopic Poles that easily allow the lights to be attached.

Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - White Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: White

Navilight All-White 5 Mode 360 Degree 2NM with Magnet Base The Navilight 360° 2NM - US Coast Guard approved for 2 nautical miles is the most versatile light of Navisafes range of battery operated portable navigation lights and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. It uses super bright LED light, is waterproof, floats and attaches almost anywhere through its double magnetic mounting system. Examples of Usage: *Based on the Convention of the International Regulations for Preventing Collisions at Sea On a power-driven vessel underway of 12 meters or more in length but less than 50 meters in length: Sternlight All-round white light On a power-driven vessel underway of less than 12 meters in length: Masthead light Sternlight All-round white light On a power-driven vessel underway of less than 7 meters in length whose maximum speed does not exceed 7 knots: All-round white light Rowing/Paddle Vessels All-round white light Anchored vessels and vessels aground Anchor lights must always be shown from sunset to sunrise All-round white light Specifications: USCG Approval, 2 Nautical Miles 5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light Floatable, waterproof (20 m) and air-tight Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing Powered by three AAA batteries (not included) Size: H = 35 mm, Diameter = 68 mm Weight (net): 113 g Modes / approximate burn time: 16 white LED, 360° All-round light, Anchoring light / 15hrs 16 white LED, 360° Flashing light / 85hrs 10 white LED, 225° Masthead light / 24hrs 6 white LED, 135° Sternlight / 32hrs 4 white LED, 360° Cabin light / 72hrs Mounting System The double magnetic system consists of the Navilight with its magnetic base, a separate magnetic plate and a screw for attaching the plate to a wooden deck for example. It also holds the light safely on many plastic boats, biminis or any other material by placing the light on top and the magnetic plate underneath. Additionally Navisafe offers a wide range of specially designed magnetic mountings such as the Clamp-on Rail mount, Bendable Suction-mount and the Telescopic Poles that easily allow the lights to be attached.

Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - White Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: White

Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - Grey Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: Grey

Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - Grey Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: Grey

Medium Tough-Claw™ Base w/Double Socket Arm & 1.5" Round Base Adapter The RAP-404-202U consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Medium Tough-Claw™ Mount w/Custom GoPro® Hero Adapter The RAP-B-404-GOP1U consists of the medium Tough-Claw™ base, double socket arm and and 1" diameter ball with custom GoPro® Hero adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6"

Converter for RAILBLAZA Mounts Cross over product to make Navisafes magnetic lights fully compatible with the RAILBLAZA StarPorts™ EASY-TO-USE Mounting System. Examples of Usage: The Navisafe RAILBLAZA Converter secures the horizontal orientation of the Navi lights if used together with the RibPort adapter glued for example to the bow of an inflatable boat. Specifications: Save mounting of Navi lights with magnetic base (Navi light 360° 2NM, Navi light TriColor 2NM, Navi light Red/Green, Navi light 360° Rescue). Fits intony RAILBLAZA StarPort, SidePort, RailMount, RIBPort, StarPort Extender and into the TelePole Rotates through 180° Size: H = 88mm, W = 47mm Weight: 45g

Uncut Single Instrument Pod for Triton2 - Stainless Steel Clamp Max Useable Face: (5″ × 5″) Max Cut Out Area: (4.38″ × 4.38″) Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models). Stainless Steel Clamps A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails. Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in. Optional Accessory Pod One of the unique abilities with the Rail Pod is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket. 

Small Tough-Claw™ Base with Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle The RAM-B-400-UN7 consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Features: Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25"), Maximum Width = 3.25" (Minimum Height = 2.25"), Depth = 0.875" Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.95 lbs.