Right Angle Connector - PL-259 to SO-239 Adapter Shakespeare offers an extensive line of marine grade connectors and adapters for antenna installations. Gold-plated brass to better withstand the elements and to minimize traditional connector-borne signal loss.

RG-11 RF Cable for with right angle connector 50' length 75Ω Belden SNS11AS Connectors One end terminated and one loose connector supplied When determining cable lengths, remember to account for service loops (usually 14" at each end)

PP4800-07 PowerPod Pre-Cut for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Rear Mounting Brackets, Requires Raymarine Right Angle Connector) PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

VE. Direct - 0.3M Cable (1 Side Right Angle Connector) Features: Cable Length: 0.3M 1 Side Right Angle Connector Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

VE. Direct - 0.9M Cable (1 Side Right Angle Connector) Features: Cable Length: 0.9M 1 Side Right Angle Connector Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

VE. Direct - 3M Cable (1 Side Right Angle Connector) Features: Cable Length: 3M 1 Side Right Angle Connector Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

VE. Direct - 5M Cable (1 Side Right Angle Connector) Features: Cable Length: 5M 1 Side Right Angle Connector Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

VE. Direct - 10M Cable (1 Side Right Angle Connector) Features: Cable Length: 10M 1 Side Right Angle Connector Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

Shakespeare Centerpin® PL-259-CP-G Connector Shakespeare offers an extensive line of marine grade connectors and adapters for antenna installations. Our new connectors are gold-plated brass to better withstand the elements and to minimize traditional connector-borne signal loss. SHAKESPEARE CENTERPIN® REVOLUTIONIZES THE PL-259 AND PL-258 The perfect solution to the troublesome task of installing a PL-259 connector or splicing RG-58 A/U, RG-8/X or Lo-Max® coaxial cables. Shakespeares revolutionary Centerpin® connectors are solderless, fret-less, and botchless. They go on without a hitch, without soldering skills. No measuring, no critical stripping of coax insulation, no fussing with the coaxs braid, and no "tinning." PL-259-CP-G is a Centerpin® PL-259 connector for RG-8X or RG-58/AU coax. Gold plated.

Power Cable Right Angle - 2-Pin Power your compatible black box sonar with this 6' (2M) threaded power cable. The right-angle connector helps with the tight fit often associated with mounting.

50' RG-6 Coax with F Connector Designed for TV1 - Right Angle End Features: RG-6 with right angle connector 50' length F connector, one end right angle One end terminated and one loose connector supplied When determining cable lengths, remember to account for service loops (usually 14" at each end) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Power Cable (Right Angle) Use our 2' replacement threaded power cable to power the MFD. The right-angled connector helps with the tight fit often associated with flush mounting. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NMEA 0183 Threaded Cable Right Angle - 6' Connect your GPSMAP® device with this 6' (1.8M) threaded NMEA 0183 cable for data communication. The right-angle connector helps with the tight fit often associated with flush mounting. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Right Angle NMEA 0183 w/Audio Cable - 7' Network your GPSMAP® 8400/8600 with this NMEA 0183 data communication cable. Includes bare wires and an RCA connector for audio connection to any stereo setup, including FUSION. The right-angle connector helps with the tight fit often associated with flush mounting. Compatible Devices: GPSMAP® 84xx & 86xx (17"-24" Only) Volvo Penta Glass Cockpit System WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1-1/2" #316 Stainless Steel NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept standard thru-hulls into the base and standard in-line valves on top Provide a safe and sturdy assembly when in-line valves are used as seacocks For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later Simplifies future valve replacement C83600 Bronze and #316 SS models