Splitter for Additional 12V Receiver M1 & M3 Installations Special Splitter for 12V Mobile DIRECTV Standard-definition Receiver/Controller Configurations.

FA-30 VHF-AIS Splitter The VHF splitter enables the AIS receiver and VHF transceiver to share a single VHF antenna. Note: The FA-30 can not receive AIS signal when the VHF transceiver is transmitting. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MIM-2 Interface for Dish Wally Receivers This multiswitch module for Dish Wally receivers enables automatic satellite switching and is compatible with all new t-Series, s-Series, i-Series, and t-Series satellite TV systems when used with Dish Network (USA) Wally receivers. Features: White-colored unit with four receiver connector ports Installation and configuration are very easy and simple Can be daisy-chained to support both new and legacy receivers Intellian's MIM-2 allows you to select which receiver connected to the MIM will be the "master" receiver The "master" receiver will control which satellite the antenna is focused on Simply choose your desired channels by using the receiver's remote control through the master receiver *Dedicated to the DISH Wally receiver and is not backwards compatible with the DISH VIP211 and VIP711

ADAF3 Modular Top Plate for FLIR M300 Series Thermal Cameras f/Mounts Ending in M1 or M2 Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.  Unique Design No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics. Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top Plates King Starboard The ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.

1014 Mounting Bracket f/1011 12V Socket Socket not included Features: Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system - plug locks securely into socket Internal strain relief and cord seal Nickel plated copper alloy used for all current carrying components Front panel, rear panel, or surface mount WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DIRECTV H25 HDSWM Receiver - 110V AC with IR Remote Included - *Remanufactured **Use with Commercial Accounts Only** The H25 is a smaller HD Receiver designed to work on SWiM networks only. The H25 is a 12vDC receiver that comes with a AC Adapter but it gives you the option of using 12vDC to power. The reduced size allows more flexibility when choosing the location of the unit in a customer's home, boat or business. The H25 Receiver is compatible with high-definition TVs with HDMI and capable of 1080p and 3D, including models from these manufacturers: Hitachi, LG, Mitsubishi, Panasonic, Philips, Pioneer, Samsung, Sony, Sharp, Toshiba, Vizio & Westinghouse. Additionally, the H25 Receiver has an AMC satellite tuner capable of receiving both DIRECTV legacy and A3 transmissions. Features & Accessories Include: Push button front panel Single composite A/V (RCA Type) out Combo component/composite out mini-DIN-10 (optional) External power supply (The H25 uses a DIRECTV EPS10 series external power supply) SWiM only SAT-IN Tuner Optional wall/TV mounting bracket Additional Features: DIRECTV requires a 24 month (lease) commitment on all activated receivers SWM System Required Integrated Deca technology Parental controls/locks: Enjoy peace of mind over what your children are watching by locking out objectionable programming DECA Compatible Multi-Room Viewing Compatible MRV Compatible 3D Ready Receiver Faster guide surfing, and channel changing See whos calling with on-screen Caller ID. View and log Caller ID info provided by your local phone company DIRECTV H25 Reciever Dimensions: Width 8.66" Height 1.12" Depth 5.75" Weight 1.19 lbs. In The Box: AC Adapter DIRECTV User Guide Access Card 6-Foot HDMI Cable RC65X IR Remote PLEASE CONTACT KVH FOR RECEIVER ACTIVATION: directv@kvh.com 

5257-S Antenna Splitter for VHF Radio, AIS Receiver and AM/FM Stereo Features: Antenna Splitter Specifically for VHF Radio, AIS Receiver and AM/FM Stereo

Controller for Audible Alarm Receiver with Strobe Qi Rechargeable Lunasea Lighting has introduced an innovative new water safety device designed for child and pet safety. This complete safety system incorporates improved packaging other devices simply don’t offer, allowing for increased convenience and, most importantly, greater peace of mind. In addition to being the smallest multi-function distress light and signaling device on the market today, unlike competitive offerings, Lunasea’s waterproof device is easily rechargeable. Waterproof, rechargeable pocket-size audio/visual alarm receiver that increases your ability to keep track of your loved ones at all times. Features: Extremely Bright Strobe Audioable Alarm Operates up to three days on single charge Belt Clip Included

Flir Deluxe Dual Station Accessory Kit for M-Series Includes: Joystick control unit with weather cover, 25' shielded ethernet cable (RJ-45), 25' video cable, 50' video cable, video amplifier/splitter, Qty 2 12V power over ethernet injector, and mounting hardware

URP-102 Point Pad™ Kit for ACR Searchlights  Control an ACR spotlight from any place on a vessel with fingertip control and accuracy  This controller can be surface or flush mounted. In the Box: Point Pad™ URP-102 remote  Flush and surface mount case Gaskets (surface and Flush) Splitter F-Connectors Coaxial cable - 15' *Sold as an Individual WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FINISH THOMPSON M1 1/7HP 10,000RPM 115V OPEN

Oberdorfer SM20713CW-M1 SS Gear Pump Less Motor

Oberdorfer SM41716PW-M1 SS Gear Pump Less Motor

Black Modular Plate for FLIR M300 Series Thermal Cameras for Mounts Ending in M1 or M2 Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.

NAC-D Autopilot Computer for Steer By Wire NAC-D is a steer-by-wire autopilot solution for Electronic Vessel Control Systems (steering systems with a digital interface). With NAC -D, boaters with SeaStar® Optimus®, Yanmar® VC10/JC10, Volvo® IPS/EVC or Yamaha® helm master/single-engine control systems can benefit from all the full features and performance of Simrad® autopilots. Easy to install Requires only the connection of two Micro-C connectors – there is no requirement for an additional hydraulic pump, rudder sensor installation, or dockside rudder calibration. This saves boaters time and money. Automatic switching Featuring Continuum® steering and support for the SteadySteer™, the NAC -D allows automatic switching between two-speed profiles delivering optimal steering performance at both low and high speeds. Flexible choice Choose the controller to suit your preference from dedicated controllers like the AP™ 44 or AP 48. Simrad® autopilot systems incorporate state-of-the-art electronics and represent over 70 years of experience and development. Simrad® autopilots can reduce your workload and fatigue and improve your situational awareness and safety, helping you arrive fresher at your destination. Features SeaStar Solutions®, Volvo®, Yanmar® and Yamaha® approved control system interface Control via AP™ 44, AP 48 No need for an additional hydraulic pump, rudder sensor, or dockside calibration SteadySteer™ feature included Steer to a waypoint, heading, or set turn pattern, such as a U-turn, Spiral turn, and many more – the NAC™ -D can even initiate a zigzag turn CAN-bus data connectivity - connection to Optimus® steering systems via the CAN-bus data network