|
Water Puppy (US)
Features:
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps
Simple design means fewer wearing parts
ISO 8846 MARINE (Ignition protection)
ISO 8849 MARINE (Bilge pump standard)
Flow rate: 23.8 Litres/min (6.3 USgallons/min) Self-priming from dry up to 1.2m (4ft)
Body: Bronze
Impeller: Neoprene
Seal: Lip type
Voltage: 12 Vdc
Amp Draw: 8 amp
Fuse Size: 15 amp
Motor: Permanent magnet type, fully enclosed, stainless steel shaft. Adapter for 3/4" External Garden Hose Thread included
Weight: 4-1/2 lb
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
200.93 |
|
|
Jabsco 12V Mini Puppy
FEATURES
Pump Body:
Bronze
Port Size:
3/8" Pipe Thread Internal Plus an adaptor for 3/4" garden hose thread.
Flow:
1.8 GPM at 5 feet of head.
Pressure:
Up to 13 PSI at 30 feet of head.
Impeller:
Neoprene or Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
Permanent Magnet Type, Fully enclosed. Motor meets USCG Electrical Standards (Title 33, Chapter 1, Part 183; Subpart 1) for IGNITION PROTECTION on gasoline powered vessels.
APPLICATIONS / CHARACTERISTICS
Use for bilge pumping, livewell circulation, washdown and general pumping requirements. When bilge water contains significant amounts of oil, use Nitrile version with impeller No. 14750-0003-P. For intermittent duty, motor may be reversed. With a wet impeller, pump will produce a suction lift of about 4 feet (1, 2m) and a lift to 15 feet (5m) when primed.
Jabsco Mini Puppy 12V 3/8"NPT And Garden Hose Adaptor Neoprene Impeller
|
279.38 |
|
|
Jabsco 12V Mini Puppy
FEATURES
Pump Body:
Bronze
Port Size:
3/8" Pipe Thread Internal Plus an adaptor for 3/4" garden hose thread.
Flow:
1.8 GPM at 5 feet of head.
Pressure:
Up to 13 PSI at 30 feet of head.
Impeller:
Neoprene or Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
Permanent Magnet Type, Fully enclosed. Motor meets USCG Electrical Standards (Title 33, Chapter 1, Part 183; Subpart 1) for IGNITION PROTECTION on gasoline powered vessels.
APPLICATIONS / CHARACTERISTICS
Use for bilge pumping, livewell circulation, washdown and general pumping requirements. When bilge water contains significant amounts of oil, use Nitrile version with impeller No. 14750-0003-P. For intermittent duty, motor may be reversed. With a wet impeller, pump will produce a suction lift of about 4 feet (1, 2m) and a lift to 15 feet (5m) when primed.
Jabsco Mini Puppy 12V 3/8"NPT And Garden Hose Adaptor Nitrile Impeller
|
339.13 |
|
|
Jabsco Plastic Water Puppy
FEATURES
Pump Body: Plastic
Port Size: Slip-on Barbs for 5/8" ID hose
Flow: Up to 5.0 GPM
Pressure: Up to 8.7 PSI
Impeller: Neoprene or Nitrile
Shaft Seal: Lip Type
Shaft: Stainless Steel
Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft
Complies with USCG Electrical Standards (Title 33, Chapter I, Part 183; Subpart 1) for IGNITION PROTECTION on gasoline powered vessels.
APPLICATIONS
Bilge pumping, live well circulation, washdown and general pumping requirements. If bilge water contains significant amounts of oil, the standard impeller must be replaced with a nitrile impeller 6303-0003 (nitrile) to avoid impeller swell. With a wet impeller, pump will produce a suction lift of about 4 feet (1.2m) and lift of 20 feet (6m) when primed. If the pump is dry, it will prime about 1.5 feet (0.47m).
Jabsco 12V Plastic Water Puppy 5.0GPM, 8.7psi Max, 5/8" Hose Ports, 12V DC
|
344.75 |
|
|
Jabsco 6350-0001 6V Water Puppy
|
141.17 |
|
|
Gianneschi IDROMINI-ACB61E-12V Bronze Pump
12V Water Pressure System
Main Water Pressure System features:
High quality, bronze self-priming centrifugal pump with star impeller
Includes pressure switch, membrane tank, pressure gauge and no-return valve
Painted steel with s/steel flange
Tank capacity from 2 to 5 litres
|
1336.76 |
|
|
Gianneschi ECOINOX-1-CE-12V Water System 12V
Main Water Pressure System features:
A valid substitute mechanical control
Compact size
Constant flow with variable water demand
Dry run protection
Jet type self priming el/pumps in bronze or s/steel
No accumulator tank needed
Pre-set pressure system (no adjustments need)
Reduced maintenance
Port Size: From 1'' to 1'' 1/2 BPS
|
1681.78 |
|
|
Gianneschi IDROMINI-ACB80E-12V Bronze 12V Water Pressure System
Main Water Pressure System features:
High quality, bronze self-priming centrifugal pump with star impeller
Includes pressure switch, membrane tank, pressure gauge and no-return valve
Painted steel with s/steel flange or totally s/steel tank
Tank capacity from 2 to 5 litres
|
2556.94 |
|
|
Jabsco Water Puppy 12V
FEATURES
Pump Body:
Bronze
Port Size:
1/2" Internal Pipe Threads, 1" External Hose Barb Adapter for 3/4" External Garden Hose Thread included
Flow:
23.8 Litres/min (6.3 USgallons/min)
Impeller:
Neoprene or Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
12V Permanent magnet type, fully enclosed, stainless steel shaft. Motor meets USCG Electrical Standards 183.410 and ISO 8846 MARINE for IGNITION PROTECTION on gasoline powered vessels.
APPLICATIONS / CHARACTERISTICS
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. Use for bilge pumping, livewell circulation, washdown and general pumping requirements. If bilge water contains significant amount of oil, use the oil resistant nitrile model.
Jabsco Water Puppy 12V, Up To 6.3GPM with Nitrile Impeller
|
235.09 |
|
|
Jabsco 23680-4003 Comm Duty Water Puppy 12V
|
267.77 |
|
|
Commercial Duty Water Puppy
Flow rate: 34 litres/min (9 USgallons/min)
Self-priming from dry up to 1.2m (4ft)
Features:
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
Simple design means fewer wearing parts.
ISO 8846 MARINE (Ignition protection).
ISO 8849 MARINE (Bilge pump standard).
Motor
Permanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump
Port Type
1/2" Internal Pipe Threads
1" External Hose Barb
Adapter for 3/4 " External Garden Hose Thread included
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
351.42 |
|
|
Jabsco 18670-0943 Water Puppy 24V
Commercial Duty Water Puppy
Flow rate: 34 litres/min (9 US gallons/min)
Self-priming from dry up to 1.2m (4ft)
Features:
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
Simple design means fewer wearing parts.
ISO 8846 MARINE (Ignition protection).
ISO 8849 MARINE (Bilge pump standard).
Motor
Permanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump
Port Type
1/2" Internal Pipe Threads
1" External Hose Barb
Adapter for 3/4 " External Garden Hose Thread included
|
411.16 |
|
|
Commercial Duty Water Puppy
Flow rate: 34 litres/min (9 USgallons/min)
Self-priming from dry up to 1.2m (4ft)
Features:
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
Simple design means fewer wearing parts.
ISO 8846 MARINE (Ignition protection).
ISO 8849 MARINE (Bilge pump standard).
Motor
Permanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump
Port Type
1/2" Internal Pipe Threads
1" External Hose Barb
Adapter for 3/4 " External Garden Hose Thread included
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
351.42 |
|
|
JABSCO SK224-01 SERVICE KIT (WATER PUPPY)
|
73.63 |
|
|
Jabsco 23680-4103 Water Puppy 24V
Connections: for 25mm (1”) bore hose or ½” BSP
Dimensions: 195mm long, 120mm wide, 75mm high
Fuse Size: 10(amp)
Output: up to 32 litres/minute (6.5 gallons/minute)
Medium duty, continuously rated bilge and deckwash pump
Self-priming up to 1.2m vertical lift
Simple, fully serviceable design with few wearing parts
Can generate pressures up to 0.4 bar (6psi)
Bronze body, stainless steel shaft
|
267.77 |
|