Porta Quick Oil Changer The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel's own power supply to operate the powerful oil reservoir mounted flexible impeller pump. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flat Tank Oil Changer System The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing engine oil in Boats, RV's, Lawn and Garden Equipment. There is no need to worry about open containers causing spills when changing engine oils with the 3-1/2 Gallon (13LTR) compact self-contained unit fitted with a self-priming diaphragm pump with an easy pour spout for emptying. The Flat Tank design allows for easy storage in deck boxes, boat storage lockers, or RV storage compartments. Easy to use, clean and efficient dipstick suction tube, battery clamp wire leads, an on-off pump switch. Features: Stores easily Compact robust tank design Easy pour spout with screw on cap Easy to carry handle 3-1/2 gallon (13ltr) sealed container Self-priming, run dry pump WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

  Jabsco offers 3 options of Oil Change Systems to help you get you ready for Winter.         The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel's own power supply to operate the powerful oil reservoir mounted flexible impeller pump.       The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engine oil pan or transmission sump.         The Do-it-Yourself Oil Changer will extract up to 50 weight of oil at a temperature of 160°F (71°C) through the engine's dip stick tube, usually in less than 5 minutes.       The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing oil in Boats, RV's, and Lawn and Garden Equipment.     Specials    Closeouts   Remanufactured    Rebates

Jabsco 17830-0012 12V Oil Pump Pump Body: Bronze Port Size: 3/8" NPT Impeller: Nitrile Shaft Seal: Buna Lip Type Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).    APPLICATIONS The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.    

Jabsco 17830-0024 24V Porta-Quick Flex Impeller Pump Pump Body: Bronze Port Size: 3/8" NPT Impeller: Nitrile Shaft Seal: Buna Lip Type Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).    APPLICATIONS  The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.     Jabsco Flexible Impeller Oil Change Pump 24V Reversible  

17820 Oil Changer System The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Engine Oil Changer Oil Drain Pump Polished brass hand pump connects directly to engine oil dipstick tube on many popular marine engines such as OMC and Mercruiser. Features: Screws onto threaded male 3/4" garden hose (GHT) fitting on top of dipstick tube. Gives simple "one-hand" pumping Complete with 2ft of 1/2" ID drain hose WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Oil Changer System This kit is particularly suitable for oil changes or the removal/change of other viscous liquids like antifreeze in tight spaces. Features: The pump is self-priming and can run dry Can be reversed Kit Contains:  5-gallon bucket 12V gear pump with 6 ft. wires with fuse and battery clamps Oil dip hose set with 6mm and 8 mm quick-connect hose connections 5/8 in. port connections 6 amp fuse for continuous duty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Jabsco 58220-1024 Toilet 24 Volt The Jabsco 58220-1024 is a Deluxe Flush 17 Inch Slant Back Electric Toilet, 24 Volt DC, with a White Glazed Vitreous China Bowl. This toilet has a hygienic white glazed vitreous china bowl for ease of cleaning and a luxury wooden seat and cover with tough baked enamel coating. The 58220 and 58240 Series are supplied with a remote mounted self-priming Rinse pump to bring in sea, river or lake rinse water. The Rinse pump is self-priming up to 3m (10ft), is dry running, and is a diaphragm water pump driven by a 12 or 24 Vdc permanent magnet ball bearing motor. The Flush pump is an internally mounted, high speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12 or 24 Vdc, permanent magnet motor with ball bearings and robust ceramic seal, discharges up to 6ft (2m) above the base of the toilet. The control panel is a One Touch 'Press and Release' switch pad, sealed for life, with 10ft (3m) link cable, fitted quick connector, and heat shrink seal. The Deluxe Flush range is Jabscos newest offering to the top of the range electric toilet market. The stylish and extremely compact design is carefully contoured to conceal the flush pump, wiring and plumbing, while still featuring a full-size household seat. This slant back toilet gives a minimal footprint and makes it easy to mount against a sloping surface or in a corner. The toilet features a new multifunctional 'one touch' control pad which adapts to standard Gewiss and Vimar switch fascias.   Features : Pump Body:White Glazed Vitreous China Bowl   Product Specs : Virtually silent operation for comfort onboard and undisturbed sleep. No 'dirt traps' and crevice free contours for maximum hygiene and easy cleaning. Complies with USCG 183.410 and ISO 8846 MARINE . Angled back high vitreous china bowl. Space saving stylish design. Regular household size seat. User selectable choice of 'one touch' flush cycles for minimal water usage - a 'Quick Flush' uses less than 1 quart . Owner selectable choice of leaving bowl wet or dry after use. Non-clogging large bore flush pump macerates waste. Uses less than 1.0 amp/hour per day. All plumbing and wiring easily concealed.

Jabsco 37045-0094 Toilet 24V Reg Bowl Jabsco 37045-0094, Quiet Flush Electric Toilet. Toilet is 24 Volt DC. Compact Size Size.   Features : Pump Body:White Vitreous China Bowl Port Size:Ports are 3/4 Inch Inlet Hose Barb X 1 Inch Discharge Hose Barb   Product Specs : Can be plumbed to any pressurized water system that can provide a 3-1/2 GPM flow rate Very quiet flush cycle - like a household toilet Single button flush actuator - with dual function water level control switch May be mounted up to 3' below the waterline with proper plumbing to prevent flooding. Features a powerful macerator discharge pump that breaks up waste and evacuates the toilet. Water control solenoid valve with anti-siphon breaker to prevent contamination of potable water supply Supplied complete with 6 feet of white hose to neatly connect the inlet bowl fitting to either the solenoid valve/siphon breaker assembly or inlet pump. Hygienic, pure white vitreous china bowl for ease of cleaning. Baked enamel seat and cover Complies with USCG 183.410 and ISO 8846 MARINE

Jabsco 29097-1000 Toilet Seat Compact

Jabsco 24382-9000B Oil Seal Kit

Jabsco 31910-2115 Hosecoil Horiz Mt W/25' Blu  

Jabsco 31910-1225 Hosecoil Regular 25'X.35"Id

    Easy, Quick & Hassle Free The portable oil change bucket features the reliable, heavy-duty F3B-19 flexible impeller pump with an integrated flow reversing switch. The F3B-19 Oil Change Bucket from Johnson Pump provides your service shop with a dependable and long-lasting oil change solution.     Features:   5.5 gallons per minute Flexible Impeller Pump Assembly Easy, quick, no-mess, no-hassle, oil change package Replaceable impeller - nonfixed Automatic shut off Complete, ready to use Portable and convenient High-temperature resistant dipstick tube Heavy-duty extended 8' alligator clips easily clamp directly onto the battery Sealed lid with easy-to-use pour spout for emptying used oil     Better Quality, Better Performance   The preferred OEM replacement for Sherwood 1500k impeller.  Made with the patented MC 97 rubber compound this impeller is designed to provide maximum engine performance and adheres to strict tolerance manufacturing with exact OEM dimensions. • Proven longer impeller life • Less material failure and swelling • Best engine cooling impeller • Stable pressure • Exact dimensions • Used by leading manufacturers   Specials    Closeouts    Remanufactured    Rebates