In-Line Strainer - 1/2" Hose Barb - 20 Mesh As a boat owner, it’s important to prevent debris from entering your water pressure and washdown pumps. The water pressure pump should be protected by a strainer on the intake side that stops small materials from getting to it and damaging it. The Jabsco Pumpgard strainer prevents particles from jamming valves and causing pump breakdowns. The Pumpgard is engineered with a screw-off, transparent housing for easy inspection and quick, in-place cleaning. This pump's mesh option is 20 mesh, which is typically used in open-flow applications such as spigots and garden spray nozzles. Features: Prevents unnecessary pump breakdowns caused by particles in the water Operates in any position Corrosion-resistant materials throughout Specifications: Barb: 1/2 in.

Pumpguard In-Line Strainer - 1/2" NPT Port Handy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump. Clear inspection cover lets you see if it needs cleaning. Prevents dirt from entering pump intake. Works in any position. Easy to install and clean. Has transparent housing and stainless steel mesh filtering screen. Jabsco Pumpguard in-line strainers make great filtering agent. WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Pumpguard In-Line Strainer - 1/2" NPT Handy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump. Clear inspection cover lets you see if it needs cleaning. Accommodations: For 1/2" Line For Use With: In-Line Material: Plastic & Stainless Screen Type: Strainer WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Pumpgard In-Line Strainer 3/4 Hose - 40 Mesh Inlet strainer protects all-electric diaphragm pumps. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Quick, in-place cleaning of the 40 mesh stainless steel screen.

Flojet 01815000C 3/8 Slip Stem 1/2 Hose Barb  

1-1/2" Hose Barb Stainless Straight Deck Drain  Features: Scuppers are installed flush with the deck and have a removable drain. #316 Stainless Steel Thru Deck Drain with Bronze Hose Connection

Sherwood 11810 1/2"-3/4" 20 MESH SCREEN    

Hypro 3800-0029 1/2"-3/4" 20 Mesh Screen

Flojet 20381-009 Quad Ports 1/2" Hose Barb 90 degree Elbow  Flojet Snap-In Quad Port Kit with EPDM O-Ring 1/2” Hose Barb Elbow (pair)

Flojet 20381-017 Quad Port Kit 1/2" Hose Barb Elbow Flojet Snap-In Quad Port Kit with Viton O-Ring 1/2” Hose Barb Elbow   Quad port to 1/2" hose barb 90 degree elbow Viton O-ring For potable water only   Set of 2 fittings   This snap-in quad port kit makes hose removal easy for faster system draining. It's perfect for winterizing your Boat or RV camper.

Flojet 01740-002 Strainer 1/2Brb X 1/2Brb  Flojet- Strainer 1/2” Hose Barb Inlet x 1/2” Hose Barb, 40 SS Mesh Screen

Fine Mesh Pumpgard In-Line Strainer Compact pre filter prevents particles jamming valves and causing pump breakdowns - we've given them a screw off, transparent housing for easy inspection and quick, in place cleaning. Our new Universal model makes it easier than ever to install your pump by fitting directly into diaphragm pump inlet port as well as benefiting from swivelled angled inlet port on a rotating body so inlet hose can approach from any direction! WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Flojet 01720-375B Strainer 3/8 Brb 20 Mesh Strainers for In-Line Applications. FDA Approved for Potable Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

Twist-On Water Strainer - 1/2" Barb Inlet - Clear Bowl Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly. Features: 50-Mesh SS Screen Easy to Install to Pump Head Clear, Clean Plastic Construction Makes it Easy to See When Cleaning is Needed Keeps Debris out of the Pump Easy Disassembly for Cleaning WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Swivel Nut Strainer - 1/2" Barb Inlet - Clear Bowl Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly. Features: 50-Mesh SS Screen Easy to Install to Pump Head Clear, Clean Plastic Construction Makes it Easy to See When Cleaning is Needed Keeps Debris out of the Pump Easy Disassembly for Cleaning