|
SM-18-A
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Units:
Intellian - i4 & i4P
KVH - M5, FB250(18"), TV5
Raymarine - 45STV
Sea Tel/Cobham - ST14, FX150 (16.5")
VDO - Ocean Line 337
|
489.60 |
|
|
Mast Platform for KVH M7/TV6 & Intellian i6/D6
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Units:
Glomex - 20"-27" satdomes
Intellian - i5, i6, i6P, S6HD, FB500 and v45C
JRC - JUE 500 (24")
KVH - M7, M7SK, FB500(26"), V7, V7-IP, TV6, HD7 and TV3-IP(24")
Oyster - 50MGS, 75MGS, 77MGS and TRX-7MGS
Raymarine - 60STV
Seatel / Cob Ham - C18 & FX250 (24")
Thrane & Thrane - Sailor FB500 & Fleet 55+
VDO - Ocean Line 345, 360, 445 and 460
|
676.80 |
|
|
Mast Mount f/KVH TV1
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Units:
Intellian - 12 & i3
KVH - M1DX, M1, TV1, M2, M3, M3DX, M3ST, V3, V3-IP, TV3, V3HTS and V30
Raymarine - 33STV & 37STV
|
436.80 |
|
|
Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or Larger
Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.
Heavy Duty
Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.
|
489.60 |
|
|
Mast Mount for FLIR Thermal Camera & Raymarine M-Series
Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.
Heavy Duty
Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.
|
422.40 |
|
|
Modular Plate for KVH/Intellian/Raymarine/Sea-King/Sea-Tel/VDO
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
|
254.40 |
|
|
Modular Plate for Glomex/Intellian/KVH/Thrane & Thrane/Raymarine/VDO
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
King Starboard
Made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.
|
235.20 |
|
|
18" Radar Mast Platform
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Manufacturers:
B&G
Garmin
Humminbird
Lowrance
Raymarine
SImrad
|
360.00 |
|
|
Seaview Stainless Steel Guard for 12-20" Radar Domes
Protect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316 stainless steel and finished with a high polish. No extra fastenings required, mounted using the radome bolts. Fits easily between the mast mount and radar antenna.
Compatible Units:
Furuno - 15" - 18" Radomes, DRS42 (1st Watch)
Garmin - GMR18(HD), GMR18x(HD) Radomes
JRC - JUE 250, JUE 33 (14")
Koden - 18" (MDC 900 Series) Radomes
Lorenz - 12" - 24" Radomes
Lowrance - 3G, 4G Radomes
Raymarine - 18" Radomes, 33STV, 37STV, 45STV
Seiwa/Tech Marine - 12" - 24" Radomes
Simrad - 3G, 4G, HALO20
Sitex - 18" (T760/T921) Radomes
Thrane & Thrane - FB150, FB250, Fleet33, Fleet33+
|
475.20 |
|
|
12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate Required
Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.
Compact Design
Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.
Eliminate Interference
A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.
Universal
The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.
Modular Top Plate
The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately*
|
1008.00 |
|
|
Seaview Stainless Steel Guard for 20" to 24" Radar Domes
Protect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316 stainless steel and finished with a high polish. No extra fastenings required, mounted using the radome bolts. Fits easily between the mast mount and radar antenna.
Compatible Units:
Furuno - 24" Radomes
Geonav - 24" Radomes
Garmin - GMR24(HD) Radomes
Humminbird - HB2124 CHIRP Radar
JRC - JUE 500 (24"), JMA-5104, NKE-2042 (24")
Koden - 24" (MDC 900 Series) Radomes
Raymarine - Quantum/ Quantum2, 24" Radomes and 60STV
Simrad - HALO24, DX64S
Sitex - 24" (T761) Radomes and 25" Radomes
Thrane & Thrane - Sailor FB500, Fleet55+
|
489.60 |
|
|
PM5-FMT-8
Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.
Extra Security
No visible bolts on the camera mounting plate provides extra security and improved aesthetics.
Small Base Fotprint
This mount is the perfect solution for installations where space is limited.
|
374.40 |
|
|
Camera Mast Mount f/FLIR M100/M200
The ingenious Camera Mast Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse. designed specifically for the FLIR M100 / M200 range ensuring the perfect fit for your camera.
Scanstrut Mast Mounts are the first choice for boat owners the world over. The range has been extended so we now offer an option for installing Infrared red cameras onto the yachts mast.
Features:
The only aft raked camera mounts on the market
Compact mounting profile to ensure a neat installation
Scanstrut renowned design and build quality
Partnership with Raymarine to create the optimum mounts for the M100/M200 series
Compact mounting feet to ensure a neat & effective installation
Very Compact Mounting - Camera fits safely and snugly against the mast
Universal Fit and Secure Install - Adjustable mounting feet which fit any mast size. The four swivel feet use a 12 point fixing using high quality monel rivets
Safety Wire Kit - Independently attaches the camera to mast in case an accident damages the installation
|
316.57 |
|
|
Self Levelling Radar Mount - Mast
Devices Compatible with LMM-2 Self Levelling Radar Mount
Furuno - 1621, 1622, 1623, 1715, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D / DRS4D-NXT, DRS4W, NavNet (18"), NavNet (24")
Humminbird - AS 21RD4KW
Interphase - Mini RE-1, RE-8, RE-9
JRC- 1000, 1000mk2, 1066, 1500, 1500mk2
Koden - 2kW 12", 4kW [RB715A]
Lorenz - 2kW
Lowrance - LRA-1800 / RB714A / DX42
Navman - 8000 Series [8084/8120] 18"
Nobeltec - 2kW (20")
Northstar - M series/8000i (18")
Seiwa - SWR-1, SWR-8,SWR-9
Simrad - GB40 / NX40/45 / NSE8/12 / RB712A / DX42S
Sitex - MDS -1, MDS -8, MDS -9, MDS-12, NKE-1066
Techmarine - T-72.01, T-72.02, T-72.04
Our Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations.
Features
Hydraulic damping to eliminate minor oscillations
Sealed system - entirely maintenance free
Passive system - no power required
Reduced weight aloft - complete system weighs only 3.4 kg
Easy upgrade from fixed mast mount - same mounting footprint as SC20 & M92722
Attached to mast by four swivel ffet - matches the profile of any mast
12 point fixing - highest quality monel rivets
Compact mount - radar extends only minimum distance from front of mast
Materials
Finest quality machined and anodised aluminium mast adapter
Marine grade 316 stainless steel cradle and base plate
Kit includes
1 x Levelling mount
1 x Mast Adapter
1 x Complete fastening pack
|
978.07 |
|
|
Camera Mast Mount for FLIR M300 Series
Designed in partnership with FlIR ensuring the perfect fit for your camera.
Scanstrut Mast Mounts are the first choice for boat owners the world over. The range has been extended so we now offer an option for installing the latest Thermal cameras onto the yacht's mast. Designed in partnership with FLIR ensuring the perfect fit for your camera.
Features:
Compact Mounting
Marine-grade Aluminium, with unique 4 step marine paint system for long-lasting, premium finish
Camera fits safely and snugly close to the mast
Universal mast fit
Secure install
Adjustable mounting feet which fit most mast sizes. The four swivel feet use a 12-point fixing using high quality Monel rivets
Includes a Safety Wire Kit that independently attaches camera to mast in case an accident damages the installation
|
347.63 |
|