|
IWAKI KB0137, BELLOWS 2" with 7 CONVOLUTIONS
|
22.95 |
|
|
IWAKI 23213, BELLOWS 2" with EPDM O'RING
|
35.57 |
|
|
Iwaki MD-70RLZT, 3/4 inch MPT in/outlet 684gph 220v
Iwaki MD-70RLZT Water Pump
Japanese made high pressure rated pump.
3/4 inch MPT inlet and outlet.
2/7 HP Motor output.
3400 RPM motor speed.
220 Volt
1.90 amps.
Max flow 11.4 GPM.
684 GPH
Max head 66.6 ft.
Max system pressure 42.7 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
Iwaki America Inc. of Holliston, Massachusetts, is a joint venture which grew from a 15 year association between Walchem Corp. of Holliston, MA and Iwaki Co. Ltd. of Tokyo, Japan. Combining Walchems 30 years of chemical injection and control experience with Iwakis 50 years of pump design engineering, Iwaki America offers the best chemical handling equipment for use in Chemical Process, O.E.M., Industrial and Semiconductor applications.
|
693.00 |
|
|
Iwaki MD-70RLZT, 3/4 inch MPT in/outlet 684gph 120v
Iwaki MD-70RLZT Water Pump
Japanese high pressure rated water pump.
3/4 inch MPT inlet and outlet.
2/7 HP Motor output.
3400 RPM motor speed.
120 volt
3.80 amps.
Max flow 11.4 GPM
684 GPH
Max head 66.6 ft.
Max system pressure 42.7 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RLZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
693.00 |
|
|
IWAKI MD-70RLZ, MAG DRIVE PUMP POLY 115V
Mag Drive Centrifugal Pump and Motor Assembly, High head impeller, GFRPP Polypropylene Construction, close coupled to a 2/7 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor. 3/4 Inch Hose Barb Port Connections.
FEATURES
Pump Body: GFRPP Polypropylene
Impeller: GFRPP Polypropylene
Ports: 3/4 Inch Hose Barb Port Connections
Motor: 2/7 Horsepower, 115 Volts AC, , 1 Phase 1
|
693.00 |
|
|
Impeller Kit
Material:Neoprene
Drive Type:Key Drive
Number of Blades:12
Dimensions:
Diameter:2-7/16"
Shaft Width:5/8"
Shaft Diameter:1-1/4
Insert Material:Brass
Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.
Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.
Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.
Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.74 |
|
|
Butt Hinge
Length:3"
Width:2-7/8"
Fastener:#8 FH
Material: 304 Stainless Steel
|
12.52 |
|
|
Wide Dee Shackle - 3/8" Pin - 2-7/32"L x 1-5/32"W
Features:
3/8" pin diameter
High strength to weight ratio
|
27.00 |
|
|
Snap Shackle - Large Swivel Bail - 73mm(2-7/8") Length
Heavy duty plunger springs and precision components ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength to weight ratio. Split ring on plunger pin is spot welded for security. A lanyard can be attached to the plunger pin for easy opening.
Materials:
Grade 15-5PH investment cast stainless steel body and hasp
Grade 316 stainless steel plunger pin and spring
|
53.30 |
|
|
Barrel Bolt - Chrome Finish - 2-7/8"
Constructed of durable chrome plated sand cast brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use,, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.57 |
|
|
Footrest & Bushing Set - 2-7/8" - Black
Features:
Footrest Easily Mounts To Several Sized Pedestals
Split Design Allows Mounting Without Removing Seat
Internal Plastic Bushing Prevents Scratching Of Pedestal
|
112.36 |
|
|
2-7/8" Bushing for Seat Mount Swivel
Springfield Marine Replacement/Service Part for lost or worn bushing
Compatible With:
Springfield bushings stamped with - Manufacturing Number 9010018 and Casting Number D3725
Features:
Maintains a tight fit for a securely mounted boat seat
Easy installation
Technical Specifications:
Diameter - 2-7/8"
Length - 3-9/16"
*Sold as an Individual
|
13.69 |
|
|
March 893-04 Brush 12V DC Pump
Applications for the March 893-04 Magnetic Drive Pump include marine refrigeration and water displays.
March Pump's industrial 893-04 is an American submersible seal-less centrifugal magnetic drive pump ideal for applications such as marine equipment. It is capable of generating a maximum flow of 2.7 gallons per minute at 1 foot, and its maximum head is 10.6 Feet (or around 4.5PSI). The 893-04 must be used submerged. The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet. When submerged Epoxy, Delrin, and the motor leads are also in contact with the solution. The inlet connection is 0.375 inch female pipe thread, and the outlet is 0.375 inch smooth. The standard motor is a 0.006 Horsepower DC Brushtype Motor, available in 12 Volts. The 12 Volt Motor has an operating range from 0 to 14 Volts. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 160 Fahrenheit or 71 Celsius. The March 893-04 centrifugal magnetic drive pump is capable of handling mild corrosive chemicals, acids, and solvents.
Max Flow
2.7 GPM
11 LPM
Max Head
10.6 FT
3.3 M
Power
.006 HP
.004 KW
Electrical
12V Range 0-14
Submersible
Yes
Type
Centrifugal Mag Drive
Inlet
3/8"FPT
Outlet
3/8"OD
Wet End
Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet
Uses
Pump must be used submerged
When submerged, the following is also in contact with the solution
Epoxy, Delrin, Motor Leads
|
399.96 |
|
|
Applications for the March 893-07 Magnetic Drive Pump include computer cooling, photographic processing equipment, refrigeration systems, and water displays.
March Pump's industrial 893-07 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and heat transfer. It is capable of generating a maximum flow of 2.7 gallons per minute at 1 foot, and its maximum head is 10.6 Feet (or around 4.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch female pipe thread, and the outlet is 0.375 inch smooth. The standard motor is a 0.006 Horsepower DC Brushless Motor, available in 12 Volts. The 12 Volt Motor has an operating range from 7 to 14 Volts. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March 893-07 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Max Flow
2.7 GPM
11 LPM
Max Head
10.6 FT
3.3 M
Power
.006 HP
.004 KW
Electrical
12V Range 7-14
Type
Centrifugal Mag Drive
Inlet
3/8"FPT
Outlet
3/8"OD
Wet End
Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet
|
368.06 |
|
|
Latch-tite™ Stainless Steel 2-7/16" Square
Latch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Square design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.
The Latch-tite™ series is for applications that require a heavy-duty, high performance construction and high quality appearance.
Features:
Cast stainless steel
Type 316
Deluxe polish finish
Unique stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration
Over center anti-rattle handles provide quiet operation
Concealed fasteners
Mold plugs available upon request for boat builders
Adjustable depth
Specifications:
Dimensions: 2-7/16" x 2-7/16"
Edge Thickness: 5/32"
Adjust Depth: 1-3/4"
Hole Size: 2-1/16"
Overall Depth: 2-5/16"
Screw: #8
|
50.20 |
|