|
IWAKI 24050, 1" BELLOWS EPDM
|
33.28 |
|
|
IWAKI 23213, BELLOWS 2" with EPDM O'RING
|
35.57 |
|
|
IWAKI 23223, BELLOWS with VITON 2" O'RING
|
35.57 |
|
|
IWAKI KB0137, BELLOWS 2" with 7 CONVOLUTIONS
|
22.95 |
|
|
IWAKI 23211, BELLOWS with EPDM 1" O'RING
|
33.28 |
|
|
IWAKI 23222, BELLOWS 1 1/2" VITON
|
34.43 |
|
|
IWAKI 2KBA-3ZBU1, PUMP DOUBLE BELLOWS 100V
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
|
377.52 |
|
|
IWAKI 2KBA-3ZBU2, PUMP DUPLEX BELLOWS
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
|
377.52 |
|
|
IWAKI KBA-3ZBU2, PUMP SINGLE BELLOWS 115V
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
|
245.44 |
|
|
Tuthill 4302-8 Gear Pump 9Gpm 1" W/Epdm Se
|
490.88 |
|
|
Yamada NDP-25BPE 1" Pump Epdm
Yamada NDP-25BPE 852386, Air Operated Double Diaphragm Pump with EPDM Diaphragm. EPDM Valve & O-Rings, Polypropylene (PPG) Material, 46.2 GPM Max Flow, 1" Female NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Glass-Filled Polypropylene Air Motor & 18 Feet Max Suction Lift.
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmEPDM
Discharge Volume Per Cycle0.23 gallons (862 cc)
Fluid Port1" Female NPT
Liquid Temperature180°F (82°C) Max
MaterialPolypropylene (PPG)
Max Cycles Per Minute210
Maximum Flow (GPM)46.2 GPM
Max Suction Lift18 Feet
Model Number852386
Model SeriesNDP-25 Models
MotorGlass-Filled Polypropylene Air Motor
Solids (Inches)3/16" (4.8 mm)
Valve / Seat / O-RingEPDM
|
1252.80 |
|
|
Yamada NDP-25BPE-PP 1" Pump Epdm
Yamada Pumps NDP-25BPE-PP Type, Model 854173 NDP-25 Series, Air Operated Double Diaphragm Pump, EPDM Diaphragm, EPDM Flat Check Valve / O-Rings, Polypropylene (PPG) - Non-Metallic Center Body Material, 46.2 GPM Max Flow, 1" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmEPDM
Discharge Volume Per Cycle0.23 gallons (862 cc)
Fluid Port1" NPT
Liquid Temperature180°F (82°C) Max
MaterialPolypropylene (PPG) - Non-Metallic Center Body
Max Cycles Per Minute210
Maximum Flow (GPM)46.2 GPM
Max Suction Lift18 Feet
Model Number854173
Model SeriesNDP-25 Models
MotorAluminum Air Motor
Solids (Inches)3/16" (4.8 mm)
Type854173
Valve / Seat / O-RingEPDM
|
1214.40 |
|
|
Goulds Pump 5K518 O'Ring Kit 1-5Sv Epdm
|
27.54 |
|
|
Yamada NDP-25BPS-T1-L-BSPT-PP 1" Santo Epdm Diaph Pump
Yamada NDP-25BPS-T1-L-BSPT-PP Double Diaphragm Pump, 46.2 gpm, 1" FNPT Inlet x 1" FNPT Outlet
Yamada 46.2 gpm double diaphragm pump having 1" FNPT inlet size and 1" FNPT outlet size features 20 - 100 psi maximum pressure and 180 deg F temperature rating Yamada NDP-25 series air powered double diaphragm (AODD) pumps provide a maximum flow rate of 46.2 gallons per minute. Pumps are available in aluminum, stainless steel (316), cast iron, polypropylene, and Kynar construction, with a wide variety of diaphragm materials.
|
1704.00 |
|
|
IWAKI SP22-10 BELLOWS PUMP 230V
|
393.12 |
|