i3 Base Cable - 2 Ports Base Cable Assembly for i3 with 2 Ports. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

i2 Base Cable - 2 Ports Base Cable Assembly for i2 with 2 Ports. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

16 Base Cable Assembly Base Cable Assembly for i6/i6P with 2 Ports. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

March 893-11-1/2 +Pump/12V Mtr 1/2"Ports This item is 'build to order'. Please contact us for lead time.

i3 US System US & Canada TV Antenna System & SWM-30 Kit i3 US System US & Canada TB Antenna System The Intellian i3 provides superior tracking performance compared to antenna systems of a similar size. With its stylish dome, the i3 is ideal for boats over 8m (25ft). The i3’s high signal gain makes it the best performing 37cm (15in) antenna system available today. Features: Built-in Wi-Fi enables one touch diagnostic and updates from your PC or iOS device  Auto satellite switching function from your remote control Compatible with leading satellite TV service providers around the world  60° per second turn rate ensures signal tracking at high speeds and in rough seas Travel further North or South with an extended elevation range of 10° to 80°  Built-in GPS enables faster signal acquisition Simplicity of design, no external compass or rate sensors required  Built-in HD module for Ku-band HD TV reception Receiver Required - Sold Separately SWM-30 Kit The latest and greatest external multi-switch from DIRECTV feeds up to 26 tuners in two banks of 13 for easy wiring. Supports 4K and the use of the international WorldDIRECT dish. Also included is a 29-volt power inserter that supports the SWM-8 or SWM-16 multi-switch remotely through a coax cable. It can operate from the power passing port of a splitter, or on the SWM-16, which can be run from the separate PWR port. Features: Supports two banks of 13 tuners (no MoCA/MRV crossover) Replacement for SWM-8, SWM-16, and SWM-32 multi-switches Compatible with previous generation Slimline dishes Compatible with Genie and Genie 2 For use with WorldDIRECT dish, use WD-DIPLEXER-09 diplexer sold separately For use with 4K installations, use SL5RB or SL3RBAH LNB (6 coax cables to the SWM) Output level -25dBm Powers any coax-powered device up to 13V, 500mA Requires SWM-capable receivers (H21 or higher, D12, HR20 or higher, HS17) Can be used for the SWM-8 and SWM-16 Outputs: 1 IRD & 1 SWM SWM Port Output: 29V

i3 US System 15" w/ North Americas LNB The Intellian i3 provides superior tracking performance compared to antenna systems of a similar size. With its stylish dome, the i3 is ideal for boats over 8m (25ft). The i3’s high signal gain makes it the best performing 37cm (15in) antenna system available today. Features: Built in Wi-Fi enables one touch diagnostic and updates from your PC or iOS device  Auto satellite switching function from your remote control Compatible with leading satellite TV service providers around the world  60° per second turn rate ensures signal tracking at high speeds and in rough seas Travel further North or South with an extended elevation range of 10° to 80°  Built in GPS enables faster signal acquisition Simplicity of design, no external compass or rate sensors required  Built-in HD module for Ku-band HD TV reception Receiver Required - Sold Separately High Performance You will never have to compromise on reception or quality. The i3 offers the highest signal strength available along with Intellian’s patented iQ² Technology. The slightly larger reflector and radome size over the i2 improve range and allow for a more ruggedized design, making the i3 ideal for vessels traveling at higher speeds or further into offshore waters. Constant & Seamless Entertainment With innovative technologies, the i3 always maintains the highest signal strength available and ensures crystal-clear TV reception. Intellian's super-efficient 37cm (15 inch) diameter antenna provides constant, seamless reception while the vessel is moored, at anchor, motoring along the coast or cruising offshore. The i3 2-axis antenna features a built-in GPS which can accelerate the satellite signal acquisition time while boats with conventional antennas are left watching “SEARCHING FOR SATELLITE” on their screen. Automatic Satellite Switching DISH (US) and Bell TV (Canada) users will benefit from using an Intellian MIM (Multi-Satellite Interface Module) . The Intellian MIM is required to facilitate automatic switching between satellites for these services, allowing boaters to enjoy changing channels with automatic satellite switching just like a home system. See the Intellian MIM product guide for further details. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

i3 US System with DISH/Bell MIM-2 (with 3M RG6 Cable) & 15M RG6 Cable The Intellian i3 provides superior tracking performance compared to antenna systems of a similar size. With its stylish dome, the i3 is ideal for boats over 8m (25ft). The i3’s high signal gain makes it the best performing 37cm (15in) antenna system available today. Features: Built-in Wi-Fi enables one touch diagnostic and updates from your PC or iOS device  Auto satellite switching function from your remote control Compatible with leading satellite TV service providers around the world  60° per second turn rate ensures signal tracking at high speeds and in rough seas Travel further North or South with an extended elevation range of 10° to 80°  Built-in GPS enables faster signal acquisition Simplicity of design, no external compass or rate sensors required  Built-in HD module for Ku-band HD TV reception Receiver Required - Sold Separately High Performance You will never have to compromise on reception or quality. The i3 offers the highest signal strength available along with Intellian’s patented iQ² Technology. The slightly larger reflector and radome size over the i2 improve range and allow for a more ruggedized design, making the i3 ideal for vessels traveling at higher speeds or further into offshore waters. Constant & Seamless Entertainment With innovative technologies, the i3 always maintains the highest signal strength available and ensures crystal-clear TV reception. Intellian's super-efficient 37cm (15 inch) diameter antenna provides constant, seamless reception while the vessel is moored, at anchor, motoring along the coast or cruising offshore. The i3 2-axis antenna features a built-in GPS which can accelerate the satellite signal acquisition time while boats with conventional antennas are left watching “SEARCHING FOR SATELLITE” on their screen. Automatic Satellite Switching DISH (US) and Bell TV (Canada) users will benefit from using an Intellian MIM (Multi-Satellite Interface Module) . The Intellian MIM is required to facilitate automatic switching between satellites for these services, allowing boaters to enjoy changing channels with automatic satellite switching just like a home system. See the Intellian MIM product guide for further details.

i3 US System with DISH/Bell MIM-2 (with 3M RG6 Cable) 15M RG6 Cable & DISH HD Wally Receiver The Intellian i3 provides superior tracking performance compared to antenna systems of a similar size. With its stylish dome, the i3 is ideal for boats over 8m (25ft). The i3’s high signal gain makes it the best performing 37cm (15in) antenna system available today. Features: Built-in Wi-Fi enables one touch diagnostic and updates from your PC or iOS device  Auto satellite switching function from your remote control Compatible with leading satellite TV service providers around the world  60° per second turn rate ensures signal tracking at high speeds and in rough seas Travel further North or South with an extended elevation range of 10° to 80°  Built-in GPS enables faster signal acquisition Simplicity of design, no external compass or rate sensors required  Built-in HD module for Ku-band HD TV reception Receiver Required - Sold Separately High Performance You will never have to compromise on reception or quality. The i3 offers the highest signal strength available along with Intellian’s patented iQ² Technology. The slightly larger reflector and radome size over the i2 improve range and allow for a more ruggedized design, making the i3 ideal for vessels traveling at higher speeds or further into offshore waters. Constant & Seamless Entertainment With innovative technologies, the i3 always maintains the highest signal strength available and ensures crystal-clear TV reception. Intellian's super-efficient 37cm (15 inch) diameter antenna provides constant, seamless reception while the vessel is moored, at anchor, motoring along the coast or cruising offshore. The i3 2-axis antenna features a built-in GPS which can accelerate the satellite signal acquisition time while boats with conventional antennas are left watching “SEARCHING FOR SATELLITE” on their screen. Automatic Satellite Switching DISH (US) and Bell TV (Canada) users will benefit from using an Intellian MIM (Multi-Satellite Interface Module) . The Intellian MIM is required to facilitate automatic switching between satellites for these services, allowing boaters to enjoy changing channels with automatic satellite switching just like a home system. See the Intellian MIM product guide for further details.

Base Cable s6HD - 4 Ports Base Cable Assembly for s6HD with 4 Ports. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Base Cable i4/i4P - 2 Ports Features: For i4 and i4P Ports: 2 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Stainless Steel Low-Profile Cable Seal for Cables 2-8mm The DS-LP-16-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 2–8 mm (0.08"–0.35") and connectors up to Ø16mm (0.63"), ensuring a seamless and impact-resistant solution. Premium Construction Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation. Low-Profile Design The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 73% in comparison to Scanstrut's DS16-P seal. This translates to a clean, flush, more refined look. Watertight Installation Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready. Effortless and Repeat Installations Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option. Features: IP68 Waterproof Designed for 2–8mm cables (0.08"–0.35"). UV Resistant Constructed from marine-grade 316 stainless steel No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface

Polished Stainless Steel Cable Seal - 1 Cable (2-10mm) The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Grey ABS Plastic Cable Seal - UV Stable - 1 Cable (2-10mm) The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Grey ABS Plastic Cable Seal - UV Stable - 2 Cables (2-15mm Each) The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Polished Stainless Steel Cable Seal - 2 Cables (2-15mm Each) The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.