Ember E1150Z Snap-In - Brushed Nickel - Square - Red Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Brushed Nickel - Round - Red Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Brushed Nickel - Square - Cool White Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Brushed Nickel - Square - Warm White Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Polished Chrome - Square - Red Light  Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Brushed Nickel - Round - Warm White Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Brushed Nickel - Round - Cool White Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Polished Chrome - Round - Red Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Polished Chrome - Square - Cool White Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Polished Chrome - Square - Warm White Light  Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Polished Chrome - Round  - Cool White Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Polished Chrome - Round - Warm White Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Ember E1150Z Snap-In - Polished Chrome - Oval - Warm White Light Product Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

Apeiron A1120 Spring Mount Light - Square/Square - Red, Cool White & Blue - Brushed Nickel Features: Advanced Optical System - 120° full angle. Even light, no LED “dots” or pixilation Rugged Design - Stainless steel/anodized aluminum construction, sealed design, and electronic regulation to the LED source ensure product longevity Spring Clip Mounting - Spring clip mounting offers simple installation while ensuring a secure fit when installed in dynamic applications No Heat or UV in the Light Beam - With no heat in the light beam, the fixture lens remains much cooler than halogen sources, allowing safe and ‘burn free’ operation. In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim, with pvd Round, square or square/square, five finish options. Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Product Highlights: 1.5 Watts 9-20VDC Input 3 Colors in 1 Fixture with only 2 wires 3" Diameter Stainless Steel Construction Exterior Rated Typical Applications: Marine Hardtop/Helm Wine Cellar/Cooler Lighting Decorative Accent Lighting Exclusive Technology: SmartDriver™ Integrated - i2Systems SmartDriver technology is integrated directly inside of every fixture. Connect the Apeiron to a wide range of voltages without sacrificing light output or lifetime. No external drivers are required and wiring is made simple. Tri-Light Technology - i2Systems Tri-Light Technology offers 3 colors of light within a single fixture with only 2 wires. Simply toggle the input voltage off and back on again to change from one color to the next.

Apeiron A1120 Spring Mount Light - Square/Square - Red, Warm White & Blue - Brushed Nickel Features: Advanced Optical System - 120° full angle. Even light, no LED “dots” or pixilation Rugged Design - Stainless steel/anodized aluminum construction, sealed design, and electronic regulation to the LED source ensure product longevity Spring Clip Mounting - Spring clip mounting offers simple installation while ensuring a secure fit when installed in dynamic applications No Heat or UV in the Light Beam - With no heat in the light beam, the fixture lens remains much cooler than halogen sources, allowing safe and ‘burn free’ operation. In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim, with pvd Round, square or square/square, five finish options. Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Product Highlights: 1.5 Watts 9-20VDC Input 3 Colors in 1 Fixture with only 2 wires 3" Diameter Stainless Steel Construction Exterior Rated Typical Applications: Marine Hardtop/Helm Wine Cellar/Cooler Lighting Decorative Accent Lighting Exclusive Technology: SmartDriver™ Integrated - i2Systems SmartDriver technology is integrated directly inside of every fixture. Connect the Apeiron to a wide range of voltages without sacrificing light output or lifetime. No external drivers are required and wiring is made simple. Tri-Light Technology - i2Systems Tri-Light Technology offers 3 colors of light within a single fixture with only 2 wires. Simply toggle the input voltage off and back on again to change from one color to the next.