|
5.5" Round Some Light - White/Red LED with Switch - White Housing
Features:
120° beam angle
6,000 hours of service life
Operates 12 Volt DC systems
|
27.95 |
|
|
Replacement T-Top Tube Light - White/Red LEDs
LED Lights - Hard Wired
High output, low glare
Vibration & shock-resistant LEDs
Less than 1/4 amp draw won't drain battery
Impact-resistant & water resistant ideal for marine & other outdoor uses
Tube Light
108 LEDs provide high output, low glare light
Switch from white light to red light for chart-reading
Impact-resistant Polycarbonate lens
Light tube & connection sealed for water resistance
Mounting clips included for easy installations
Ideal for use on engine rooms, T-tops and arches
Universal design for use as replacement light for existing standard T-top light housings
|
85.91 |
|
|
Round Surface Mount L.E.D. Dome Light w/ On/Off Switch
(1356)
White Powder Coat
Clear Translucent Plastic Globe
12 Volt L.E.D.s Draw Less Than 10 Watts
Dimmer Capable L.E.D.s
Screw Size No. 8 R.H.
Depth Overall 1"
3 L.E.D.s
3 watt
|
112.60 |
|
|
Surface Strip Light w/Switch - White LED - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
62.28 |
|
|
Caprera3 Spreader Light - White/Red Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
135.80 |
|
|
Caprera3 Spreader Light - White/Red Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
135.80 |
|
|
Capri3 Spreader Light - White/Red Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
135.80 |
|
|
Capri3 Spreader Light - White/Red Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
135.80 |
|
|
RGB Domed Bulkhead Light with 2 Wires - .156" Bullets
Equipped with red, green, and blue LEDs, the 011-E500 RGB LED light is capable of changing colors while using only two wires. By default, the light will illuminate white. Simply cycle the power and the color will change to red. Cycle it again and the color changes to green...blue, yellow, cyan, magenta, and then back to white.
Technical Specifications:
Size - 1"OD x 1.3"L x 0.7"ID
Clear Polycarbonate Lens
RGB LED Design
Features:
Rated for Underwater Use
Corrosion Resistant
Shock and Vibration Proof
Two 7" Wires (16 Gauge)
0.156" Male & Female Bullet Ends
9-16 VDC
Draw @ 12v - 25mA Typical
|
31.55 |
|
|
Orbit Down Light - White Housing - Red with White Dimming Light
Lumitec's Flush Mount Down Lights set a new standard in overhead lighting. The luminaires feature weatherproof construction suitable for interior or exterior installations, a shallow-depth profile (less than 1/2" below mounting surface) and an easy to install mounting system. Ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. The lights are fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming without external control modules or specialized switches. This allows boat owners to use any existing on-off switches and eliminates the need for multiple wire runs necessary for other multi-colored lights. 0 to 30VDC, draws 220mA @ 12V, 110mA @ 24V.
Features:
Intelligent circuitry allows for dimming using your existing SPST switch
Sealed for long life and extreme durability - IP 67 compliant, interior or exterior use
Attractive compact design for helm station, flybridge, hard top, and interior spaces
Mounting system is easy and fast - no "rat traps", no exposed fasteners
More features, smaller package, and lower price than competitive products
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
95.53 |
|
|
LED Surface Strip Light - White LED - 24V - No Switch
The Surface Mount Strip lamps from Hella marine are completely sealed, UV and corrosion resistant with an ultra-low profile meaning these lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature:5000K (White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming" Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
48.61 |
|
|
3 LED Surface Mount Step Light - Red with White Case
Features:
Operates 9-16 Volt DC Systems
24 Volt Version Available
Rated @ 100,000 Hours of Service Life
Shock and Vibration Proof
Cool to the Touch
Energy Draw 26 Milliamps
No Corrosion
Potted to Seal Out Moisture
3 LEDs
1.69" x .65" x .40"
|
12.35 |
|
|
Apeiron PRO A503 - 3W Spring Mount Light - Square/Round - Cool White - White Finish
The Apeiron PRO 3W is the world’s most technologically advanced Marine LED downlight. Truly a first of its kind. A finely tuned blend of classic style and the latest digital technology
Built with True-to-Life Color. With 90+ color rendering (CRI) , engineered optics, and i2Sync™ Technology, expect beautiful, consistent white light.
1% Dimming
Smoothly dim to a low-level, 1% intensity using our LightLink™ Dimmers or most any 3rd party lighting system.
3-Color Option w/ Dimming
With the click of your dimmer switch, simply select, then dim White, Red, and a Third color choice. Powered by award-winning i2Wave™ Technology.
Rugged & Waterproof
With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.
*IP67 rated. Not for use in submersible applications.
Features:
Spring Mount
Use your existing wiring and switch
Multiple color options - 1 fixture
Simple 2 wire hookup
3.15" Round
1.37" Deep
LED
Marine Grade
Refit friendly
Power: 3W
Beam Angle: 120°
Typical Applications:
Hardtop
Arch
Cockpit
Courtesy
Pilot House
|
107.56 |
|
|
Apeiron PRO A503 - 3W Spring Mount Light - Square/Round - Neutral White - White Finish
The Apeiron PRO 3W is the world’s most technologically advanced Marine LED downlight. Truly a first of its kind. A finely tuned blend of classic style and the latest digital technology
Built with True-to-Life Color. With 90+ color rendering (CRI) , engineered optics, and i2Sync™ Technology, expect beautiful, consistent white light.
1% Dimming
Smoothly dim to a low-level, 1% intensity using our LightLink™ Dimmers or most any 3rd party lighting system.
3-Color Option w/ Dimming
With the click of your dimmer switch, simply select, then dim White, Red, and a Third color choice. Powered by award-winning i2Wave™ Technology.
Rugged & Waterproof
With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.
*IP67 rated. Not for use in submersible applications.
Features:
Spring Mount
Use your existing wiring and switch
Multiple color options - 1 fixture
Simple 2 wire hookup
3.15" Round
1.37" Deep
LED
Marine Grade
Refit friendly
Power: 3W
Beam Angle: 120°
Typical Applications:
Hardtop
Arch
Cockpit
Courtesy
Pilot House
|
107.56 |
|
|
Apeiron PRO A503 - 3W Spring Mount Light - Square/Round - Warm White - White Finish
The Apeiron PRO 3W is the world’s most technologically advanced Marine LED downlight. Truly a first of its kind. A finely tuned blend of classic style and the latest digital technology
Built with True-to-Life Color. With 90+ color rendering (CRI) , engineered optics, and i2Sync™ Technology, expect beautiful, consistent white light.
1% Dimming
Smoothly dim to a low-level, 1% intensity using our LightLink™ Dimmers or most any 3rd party lighting system.
3-Color Option w/ Dimming
With the click of your dimmer switch, simply select, then dim White, Red, and a Third color choice. Powered by award-winning i2Wave™ Technology.
Rugged & Waterproof
With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.
*IP67 rated. Not for use in submersible applications.
Features:
Spring Mount
Use your existing wiring and switch
Multiple color options - 1 fixture
Simple 2 wire hookup
3.15" Round
1.37" Deep
LED
Marine Grade
Refit friendly
Power: 3W
Beam Angle: 120°
Typical Applications:
Hardtop
Arch
Cockpit
Courtesy
Pilot House
|
107.56 |
|