|
RGBW Tri-Lite w/Stainless Steel Bezel
Characteristics :
Dimensions: 4.25” x 1.375” x 0.625”
10 White LEDS
5 RGB LEDS
Waterproof
Clear Lens, Polycarbonate Housing
Available 316 Highly Polished Stainless Steel Snap-on Bezel
Impact Resistant
Shock and Vibration Proof
Connectors:
5-8” Leads
18 Gauge Wire
Ground - Black
White Light - White (+)
Blue Light - Blue (+)
Red Light - Red (+)
Green Light - Green (+)
Voltage Requirements:
Operates on 9-16 Volts DC
Current (mA):
White - 79.7
Red - 33.14
Blue - 37.05
Green- 35.94
|
22.03 |
|
|
Chesapeake Black w/Stainless Steel Bezel Boxed Set of 6 - Speed, Tach, Fuel Level, Voltmeter, Water Temperature & Oil PSI - Inboard Motors
Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Packaged and ready for the display counter. This 6 Gauge Boxed Sets offer a complete set of gauges ready to install.
Boxed Set Includes:
Speedometer (0 to 60 MPH) (GPS)
Tachometer (0 to 6000 RPM)
Fuel Level (E to F)
Voltmeter 10 to 16 AMPS)
Water Temperature (100 to 250° F)
Oil Pressure (0 to 80 PSI)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Dual Scale - Imperial and Metric
Factory P/N KTF064
*Sold as a Box Set
**Gauge Covers not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
360.59 |
|
|
Chesapeake White with Stainless Steel Bezel Boxed Set of 6 - Speed, Tach, Fuel Level, Volt, Water Temperature & Oil PSI - Inboard Motors
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens.
Packaged and ready for the display counter. This 6 gauge box set offers a complete set of gauges ready to install.
Boxed Set Includes:
Speedometer (0 to 60 MPH)(GPS)
Tachometer (0 to 6000 RPM)
Fuel Level (E to F)
Voltmeter 10 to 16 AMPS)
Water Temperature (100 to 250° F)
Oil Pressure (0 to 80 PSI)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Dual Scale - Imperial and Metric
Factory P/N KTF063
*Sold as a Box Set
**Gauge Covers not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
360.59 |
|
|
White LED Micro Light with Stainless Steel Bezel & Vertical Mount
This Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail.
Features:
0.66-watt draw at 12 volts DC
White LEDs
Rated for 50,000+ hours of use
|
20.63 |
|
|
Blue LED Micro Light with Stainless Steel Bezel & Vertical Mount
This Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail.
Features:
0.66-watt draw at 12 volts DC
Blue LEDs
Rated for 50,000+ hours of use
|
20.63 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White with White Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
67.18 |
|
|
Gen3 Warm White, RGBW Full Color 3.5” IP65 Recessed Light with Polished Stainless Steel Bezel - 12VDC
Indoor / Outdoor Recessed 3.5” LED Light 2700K, 85 CRI Dimmable COB & RGB Color LED
The newest generation Lunasea LED RGBWW recessed light. The same great warm white high output light of our LLB-46 line with the addition of full color mixing. The Red, Green and Blue LED’s are high power not the typical low power found in other products. Color mixing requires RGBW controller. IP65 for Indoor or Outdoor use.
Use with our dimmers: LLB-45WW-91-00, LLB-45WB-91-00, LLB-45WZ-91-00, LLB-45WG-01-00, LLB-45WR-91-00.
Features:
High Output Warm White & Full Color
480 Lumen, 2700K Warm White equal to 40W
IP65 Indoor/Outdoor
|
74.41 |
|
|
Gen3 Warm White, RGBW Full Color 3.5” IP65 Recessed Light with Brushed Stainless Steel Bezel - 12VDC
Indoor / Outdoor Recessed 3.5” LED Light 2700K, 85 CRI Dimmable COB & RGB Color LED
The newest generation Lunasea LED RGBWW recessed light. The same great warm white high output light of our LLB-46 line with the addition of full color mixing. The Red, Green and Blue LED’s are high power not the typical low power found in other products. Color mixing requires RGBW controller. IP65 for Indoor or Outdoor use.
Use with our dimmers: LLB-45WW-91-00, LLB-45WB-91-00, LLB-45WZ-91-00, LLB-45WG-01-00, LLB-45WR-91-00.
Features:
High Output Warm White & Full Color
480 Lumen, 2700K Warm White equal to 40W
IP65 Indoor/Outdoor
|
74.41 |
|
|
Gen3 Warm White, RGBW Full Color 3.5” IP65 Recessed Light with White Stainless Steel Bezel - 12VDC
Indoor / Outdoor Recessed 3.5” LED Light 2700K, 85 CRI Dimmable COB & RGB Color LED
The newest generation Lunasea LED RGBWW recessed light. The same great warm white high output light of our LLB-46 line with the addition of full color mixing. The Red, Green and Blue LED’s are high power not the typical low power found in other products. Color mixing requires RGBW controller. IP65 for Indoor or Outdoor use.
Use with our dimmers: LLB-45WW-91-00, LLB-45WB-91-00, LLB-45WZ-91-00, LLB-45WG-01-00, LLB-45WR-91-00.
Features:
High Output Warm White & Full Color
480 Lumen, 2700K Warm White equal to 40W
IP65 Indoor/Outdoor
|
74.41 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Red LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
28.86 |
|
|
Surface Mount Oblong LED Courtesy Lamp - White LED - Stainless Steel Bezel
Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread.
Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes.
Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry.
Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included.
Specifications:
Lens Material: UV and enhanced impact resistant Grilamid
Rim Material: 316 stainless steel
Cable: Pre-wired with 120mm of marine cable
Operating Voltage: Multivolt 12 / 24V DC
Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 35g (including cable)
Approvals: CE
|
27.34 |
|
|
Surface Mount Oblong LED Courtesy Lamp - Blue LED - Stainless Steel Bezel
Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread.
Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes.
Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry.
Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included.
Specifications:
Lens Material: UV and enhanced impact resistant Grilamid
Rim Material: 316 stainless steel
Cable: Pre-wired with 120mm of marine cable
Operating Voltage: Multivolt 12 / 24V DC
Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 35g (including cable)
Approvals: CE
|
27.34 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Warm White LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Blue LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|