|
LightLink LL-101 Marine Dimming Module
Part #: LL-101
Operation is simple! Press and hold the momentary switch to initiate dimming cycle. Dimming cycle continues to dim as long as switch is engaged, ranging from 100% to approximately 5% intensity holding 2 seconds at each position before dimming the opposite direction. Briefly press and release momentary switch for on/off operation.
Specifications:
Input Voltage: 6-36 Volt DC
Dimensions: Width: 1.5" x Height: 0.5" x Depth: 1.0"
Features:
Compatible with i2Systems Apeiron, Ember and Profile lights
Dimming control via a momentary switch or contact
Small size, encapsulated, fits into most switch boxes
The LL-101 means that no matter what level you have the lights at when you turn them off, they will resume at full brightness when turned back on.
The LightLink LL-101 is capable of dimming and controlling up to
(20) i2Systems Fixtures, including:
Apeiron A1110
Apeiron A2162
Ember E1150
Profile P1100
(20') i2Systems
S-Line S1200
|
80.48 |
|
|
LightLink™ Pro LED Module for Apeiron PRO
Press and hold momentary switch to initiate light color cycle. Dimming cycle continues to dim as long as switch is engaged.
Briefly press and release momentary switch for on/off operation.
For 2 and 3 Color enabled Fixtures, double-click momentary switch to enter color 2, triple-click for color 3.
Add additional momentary switches in parallel with the shown switch for multi-location control.
Upon loss of power, intensity and LED color of controlled Fixtures return to previous state, using LightLink’s onboard non-volatile memory.
Features:
9-36V DC Input
Low Level Dimming Using Momentary Switch Interface
Enables Smart Tri-Color Operation
Small Size, Fully Potted
Non-Volatile Memory Recalls Last Intensity
|
80.48 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Round - Cool White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Round - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Oval - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Square - Cool White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Square - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Round - Red Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Square - Red Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Square - Cool White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Round - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Square - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Round - Red Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Square - Red Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Round - Cool White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|