Speaker Mic with Alligator Clip Waterproof construction equivalent to IPX7 (1m depth for 30 min). For use with the M34 handheld VHF.

HM-205RB Speaker Microphone  Speaker microphone rear connector. Compatible With: IC-M510 IC-M510 Plus IC-M510TR IC-M506 IC-M605 IC-M605EURO Technical Specifications: Connector - 8 Pin waterproof connector Cable Length (Curled) - 16.9" (43 cm) Weight - .56 lb (253 g) Waterproof - IPX8 *Sold as an Individual 

Waterproof Speaker Mic Full sized microphone, equipped with an alligator type clip, Waterproof construction corresponds to JIS Grade 7 (1 m/30 min).

Waterproof Speaker Mic for Icom's M72, M73, & GM1600 Based on the HM-165, the HM-167 has been designed for marine users who require a lightweight IPX7 waterproof speaker microphone. For use with the Icom M72 handheld VHF.

HM-202 Compact Speaker Mic - Waterproof Features: Equipped with an 8-position rotatable clip HM-202 speaker microphone meets IP67 requirements Compatible with M72 and M73 Dust-tight and waterproof protection

HM-222H Waterproof Speaker Mic with 3.5mm Accessory Jack & 14-Pin Connector Features: The waterproof microphone can be used while in rain Equipped with an emergency switch at the top Increased speaker-microphone volume depends on the combination of the transceiver and microphone High capacity speaker and enough internal space for good quality audio Specifications: Connector Information: 14 pin spring type; Φ3.5 mm earphone jack Cable Length: 300 mm; 11.8 in  (when curled) IP Rating: IP68 (Equivalent to the main unit) Weight: 204g (approximate) Rated Input: 2.5 W (Max. 3 W)

HM158LA Compact Speaker Mic This Icom speaker microphone is for Icom portable radios that accept a 2-pin LA-type screw cap connector. See below for the entire list of Icom-compatible radios. Features: 8-position rotary clip Equipped with earphone jack 2-pin LA-type screw cap connector Specifications: Connector Information: 2-pin Screw attached type; Φ3.5 mm earphone jack Waterproof: N/A Cable Length (when curled): 19.3 in. (490 mm)  Weight: 125 g Compatible Products: IC-V86/IC-U86 IC-V80 IC-T10 IC-F3230D/IC-F4230D IC-F1100D/IC-F2100D IC-F1000/IC-F2000 IC-F3001/IC-F4001 IC-F3003 /IC-F4003 IC-V10MR IC-V3MR IC-F3031/IC-F4031 IC-F3032/IC-F4032 IC-F3033/IC-F4033 IC-F3011/IC-F4011 IC-F3013/IC-F4013 IC-F3002/IC-F4002 IC-V88/IC-U88 IC-G88 IC-G86 IC-F29SDR IC-F29DR2 IC-F29DR IC-F29SR2 IC-F29SR IC-41PRO IC-F27SR

HM184H Waterproof Speaker Mic for M85 Features: Waterproof Remote Speaker Microphone 14-Pin Large PTT Button Compatible with Icom's M85

HM159LA Large Speaker Mic Features: 45Φ large speaker delivers loud and clear sound Easy-to-hold design that fits your hand 8-position rotary clip Specifications: Connector information: 2-pin Screw attached type; Φ3.5 mm Earphone jack Waterproof: N/A Cable Length: 460 mm;  18.1 in  (when curled) Weight: 200g

Waterproof Floating Speaker Mic for M25 The waterproof speaker microphone, HM213, provides commercial grade convenience while mounting the radio around the waist. Floats in water with the radio and has an IPX7 rating.

Hydro 25" 2-Way Sound Bar Speaker System with RGB Lights - Waterproof, 600W This DS18 Sound Bar/Waterproof Speaker System is perfect for audiophiles or the everyday music listener who wants to add a cool, LOUD, clean-sounding, and slick setup to their car. The 93dB sensitivity means that it will draw less power to be as loud as other comparable speakers with less sensitivity. Complete with LED lighting, this sound bar is sure to make a statement anywhere you go. Note: The SBAR25 is a passive Sound Bar and requires an amplifier. For an amplified model with Bluetooth please refer to SBAR35BT  Features: IP65 Marine Grade Compliant- Tube Mounting Kit (Included) 8 Core Wires for RGB Lighting and Speaker Integrated RGB LED Lighting 4x4" Speakers 2x1" Titanium Tweeters Compatible with DS18 LED-BTC or any other RF/BT/Wifi Controller for Multi-Function RGB LED Lighting (Sold Separately) Left and Right Input for Stereo Application Technical Specifications: Continuous Power Handling - 100W x 2 RMS  Peak Music Power - 600W Max Frequency Response - 63Hz - 20KHz Length - 25" Sensitivity - 94.7dB 1w/1m 2.8V  In the Box: One 25” Sound Bar Speaker System  Pair 2” Tube Mounting Bracket Pair “L” Mounting Bracket Three NBR PAD One 6mm Hex Wrench Chromed

Hydro 35" 2-Way Sound Bar Speaker System with RGB Lights - Waterproof, 800W The DS18 HYDRO All Elements Series is comprised of many components and accessories to make any build imaginable come to life. With over 50 marine-grade compliant products, we have whatever you need for your ATV, UTV, Side by Side, Boat, or anything in between. We invite you to get as creative as possible and make the loudest, clearest system on any terrain, water body, or air. This DS18 Sound Bar/Waterproof Speaker System is perfect for audiophiles or the everyday music listener who wants to add a cool, LOUD, clean-sounding, and slick setup in their car. Complete with LED lighting, this sound bar is sure to make a statement anywhere you go! Compatible with DS18 LED-BTC or any other RF/BT/Wifi Controller for Multi-Function RGB LED Lighting (Sold Separately) Note: The SBAR35 is a passive Sound Bar and requires an amplifier for an amplified model with Bluetooth please refer to SBAR35BT Features: For ATV /UTV, Golf Carts & Jeep 35" Waterproof Passive Sound Bar with RGB Light IP65 Marine-Grade Compliant Technical Specifications: Continuous Power Handling - 150W x 2 RMS  Peak Music Power - 300 x 2 Watts MAX  Frequency Response - 63Hz - 20KHz  Length - 35" In the Box: 1 SET Passive Sound Bar Marine Grade with LED Light System 2 x Aluminum Brackets for Flat Mounting 2 x 2.0 for Mast Mounting Bracket 2 x 1.75 for Mast Mounting Bracket 2 x Aluminum Base Bracket for Mast Mounting 2 x NBR Pad for Mast Mounting Hardware (Stainless): 2 x M8-28, 2 x M8-55, 2 x M6-14, 2 x M8( nut) 2 x M8 Washer, 2 x M8 Check Washer 3 mm & 6 mm Hex Wrench

HM-240 Waterproof Aviation Speaker Mic 2-Pin The Icom HM-240 Waterproof Speaker Mic will work with the Icom IC-A16 and Icom IC-A16B transceivers.

M510 EVO VHF with NMEA 2000 The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety. *AIS receiver not included in the M510 EVO 41 NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment. When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker. Radio Control & Intercom Through Smart Devices Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature.  Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.    Award Winning Sleek Design - iF DESIGN AWARD 2022 The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard. Wide Viewing Angle Color TFT LCD The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions. Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security. 15 W Speaker Provides Clear and Loud Audio The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.  Simplified Navigation Function The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races. Combined with MA-510TR Supports Safer Navigation When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea. Active Noise Canceling Technology The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment. Other Features: Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount Specifications: General Specifications: Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz Usable Channels: USA, CAN, INT, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC) Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195) Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F Antenna Impedance: 50 Ω Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.): 730 g, 1.6 lb (not including microphone) Transmitter Specifications: Output Power (at 13.8 V DC): 25 W, 1W Max. Frequency Deviation: ±5 kHz Frequency Tolerance: ±0.5 kHz Spurious Emissions: Less than −70 dBc (at 25 W) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications: Sensitivity (at 12 dB SINAD): –10 dBμ typical DSC (1% BER): –1 dBμ emf typical Adjacent Channel Selectivity: More than 75 dB DSC (1% BER): More than 73 dBμ emf Spurious Response: More than 75 dB DSC (1% BER): More than 73 dBμ emf Intermodulation: More than 75 dB DSC (1% BER): More than 68 dBμ emf Hum & Noise: More than 40 dB Audio Output Power: More than 15 W (external speaker) Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer) Wireless LAN Specifications: Wireless LAN standard: IEEE802.11 b/g/n Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels: 1 to 13 (2.4 GHz band)*2 Output Power: Less than 10 mW/MHz Supplied Accessories: Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flush mount gasket *1 Only for the Integrated AIS version. *2 May differ depending on the country of use.

M510 EVO VHF with AIS & NMEA 2000 The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety. *AIS receiver is integrated in the M510 PLUS EVO 51 NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment. When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker. Radio Control & Intercom Through Smart Devices Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature.  Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.    Award Winning Sleek Design - iF DESIGN AWARD 2022 The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard. Wide Viewing Angle Color TFT LCD The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions. Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security. 15 W Speaker Provides Clear and Loud Audio The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.  Integrated AIS Receiver* With its integrated AIS receiver*1 or external NMEA sentence*2, the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen. *1 AIS receiver is not included, depending on the transceiver version. *2 Optional MA-510TR or third-party AIS receiver/transponder. Simplified Navigation Function The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races. Combined with MA-510TR Supports Safer Navigation When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea. Active Noise Canceling Technology The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment. Other Features: Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount Specifications: General Specifications: Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz Usable Channels: USA, CAN, INT, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC) Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195) Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F Antenna Impedance: 50 Ω Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.): 730 g, 1.6 lb (not including microphone) Transmitter Specifications: Output Power (at 13.8 V DC): 25 W, 1W Max. Frequency Deviation: ±5 kHz Frequency Tolerance: ±0.5 kHz Spurious Emissions: Less than −70 dBc (at 25 W) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications: Sensitivity (at 12 dB SINAD): –10 dBμ typical DSC (1% BER): –1 dBμ emf typical Adjacent Channel Selectivity: More than 75 dB DSC (1% BER): More than 73 dBμ emf Spurious Response: More than 75 dB DSC (1% BER): More than 73 dBμ emf Intermodulation: More than 75 dB DSC (1% BER): More than 68 dBμ emf Hum & Noise: More than 40 dB Audio Output Power: More than 15 W (external speaker) Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer) Wireless LAN Specifications: Wireless LAN standard: IEEE802.11 b/g/n Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels: 1 to 13 (2.4 GHz band)*2 Output Power: Less than 10 mW/MHz Supplied Accessories: Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flush mount gasket *1 Only for the Integrated AIS version. *2 May differ depending on the country of use.